Malic acid production from renewables: a review

Malic acid derived from fossil resources is currently applied in the food and beverage industries with a medium global production capacity. However, in the transition from a fossil-based to a bio-based economy, biotechnologically produced l -malic acid may become an important platform chemical with many new applications, especially in the field of biopolymers. In this review, currently used petrochemical production routes to dl -malic acid are outlined and insights into possible bio-based alternatives for microbial l -malic acid production are provided. Besides ecological reasons, the possibility to produce enantiopure l -malic acid by microbial fermentation is the biggest advantage over chemical synthesis. State-of-the-art and open challenges concerning production host engineering, substrate choice and downstream processing are addressed. With regard to production hosts, a literature overview is given covering the leading natural production strains of Aspergillus, Ustilago and Aureobasidium, as well as Escherichia coli as the most important engineered recombinant host. The utilization of renewable substrates as an alternative to glucose is emphasized in particular as a key aspect for a competitive bio-based production. Out of the alternative substrates discussed in this review, the industrial side-streams crude glycerol and molasses seem to be most promising for large-scale l -malic acid production. © 2019 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Estimating signal strengths in the design of an indoor wireless network

One issue in the design and implementation of a wireless local area network is the selection of access point (AP) locations. Proper AP placement is necessary to provide adequate signal coverage and also to minimize cochannel coverage overlap. The impact of incorrect placement of APs is significant. Placing APs too far apart can lead to gaps in coverage. On the other hand, placing the units too close together leads to excessive cochannel coverage overlap, degrading system performance. Currently, AP placement involves a "trial and error" technique. When a technician tests the effect of moving an AP from one location to another, it is necessary to spend considerable time manually measuring signal strengths in order to determine how this move affects the AP's coverage area. In this letter, we describe a procedure for estimating the coverage areas of relocated APs. The procedure can be used as part of a manual design process or as part of an automated design tool.     

Multibody simulation tool for the calculation of lashing loads on RoRo ships

Approximately 80% of the international transport of goods is carried on by means of ships. A large portion of the transport capacity is represented by Roll-on-Roll-off (RoRo) ships. Especially in Europe this is a relevant potential for the RoRo segment. Consequently, the design and construction of RoRo ships plays an increasing role for German shipyards and their suppliers. In order to make the loading and unloading procedure of trailer economically more competitive, ship owners would like to improve the lashing of trailers on the ship. On the basis of a multibody system formalism, a software tool has been developed which allows for an optimization of the loading of trailers on RoRo ships. Commemorative Contribution.     

Time dependent behavior of elements combining ultra-high performance fiber reinforced concretes (UHPFRC) and reinforced concrete

Structural elements combining Ultra-High Performance Fiber Reinforced Concretes (UHPFRC) and concrete offer a high potential in view of rehabilitation and modification of existing structures. The investigation of the time-dependent behavior of composite “UHPFRC-concrete” elements is a fundamental step in the determination of durability and serviceability. For this, an experimental program was conducted on large composite “UHPFRC-concrete” beams and a numerical model was validated with the test results. The experimental results and a parametric study performed with the numerical model showed that UHPFRC and normal strength reinforced concrete are compatible in the long-term and that the critical period of composite “UHPFRC-concrete” elements are the first 90 days after the casting of the UHPFRC layer. Thus, the high potential of such composite elements can be exploited also in the long term.     

Coefficient of friction and subjective assessment of slippery work surfaces.

Research was conducted to determine how well subjects could distinguish between surfaces with different coefficient of friction (COF) values and to evaluate how well subjective ratings of slipperiness correlated with the actual COF values. Thirty-three ironworkers experienced in working and walking on steel surfaces and 23 university students inexperienced with these tasks participated in the study. Subjective slipperiness ratings for a variety of climbing and walking conditions were obtained from the subjects. It was found that subjects could identify differences in the slipperiness of four types of steel coatings tested in the study. There was a high correlation between the subjective ratings and the measured COF values. Subjects did not slip at a COF of 0.41 but did lose footing at a COF of 0.20.     

Synthesis and Pharmacological In Vitro Investigations of Novel Shikonin Derivatives with a Special Focus on Cyclopropane Bearing Derivatives

Melanoma is the deadliest form of skin cancer and accounts for about three quarters of all skin cancer deaths. Especially at an advanced stage, its treatment is challenging, and survival rates are very low. In previous studies, we showed that the constituents of the roots of Onosma paniculata as well as a synthetic derivative of the most active constituent showed promising results in metastatic melanoma cell lines. In the current study, we address the question whether we can generate further derivatives with optimized activity by synthesis. Therefore, we prepared 31, mainly novel shikonin derivatives and screened them in different melanoma cell lines (WM9, WM164, and MUG-Mel2 cells) using the XTT viability assay. We identified (R)-1-(1,4-dihydro-5,8-dihydroxy-1,4-dioxonaphthalen-2-yl)-4-methylpent-3-enyl 2-cyclopropyl-2-oxoacetate as a novel derivative with even higher activity. Furthermore, pharmacological investigations including the ApoToxGlo^TM Triplex assay, LDH assay, and cell cycle measurements revealed that this compound induced apoptosis and reduced cells in the G1 phase accompanied by an increase of cells in the G2/M phase. Moreover, it showed hardly any effects on the cell membrane integrity. However, it also exhibited cytotoxicity against non-tumorigenic cells. Nevertheless, in summary, we could show that shikonin derivatives might be promising drug leads in the treatment of melanoma.     

Characterization of Apo-Form Selective Inhibition of Indoleamine 2,3-Dioxygenase**

Indoleamine-2,3-dioxygenase 1 (IDO1) is a heme-containing enzyme that catalyzes the rate-limiting step in the kynurenine pathway of tryptophan (TRP) metabolism. As it is an inflammation-induced immunoregulatory enzyme, pharmacological inhibition of IDO1 activity is currently being pursued as a potential therapeutic tool for the treatment of cancer and other disease states. As such, a detailed understanding of the mechanism of action of IDO1 inhibitors with various mechanisms of inhibition is of great interest. Comparison of an apo-form-binding IDO1 inhibitor (GSK5628) to the heme-coordinating compound, epacadostat (Incyte), allows us to explore the details of the apo-binding inhibition of IDO1. Herein, we demonstrate that GSK5628 inhibits IDO1 by competing with heme for binding to a heme-free conformation of the enzyme (apo-IDO1), whereas epacadostat coordinates its binding with the iron atom of the IDO1 heme cofactor. Comparison of these two compounds in cellular systems reveals a long-lasting inhibitory effect of GSK5628, previously undescribed for other known IDO1 inhibitors. Detailed characterization of this apo-binding mechanism for IDO1 inhibition might help design superior inhibitors or could confer a unique competitive advantage over other IDO1 inhibitors vis-à-vis specificity and pharmacokinetic parameters.     

Toughness Optimization of SBR Elastomers – Use of Fracture Mechanics Methods for Characterization

Elastomer materials are used in a wide application range and subjected to different loading from which failure of the material results. Because this failure is caused by initiation and propagation of cracks, the application of fracture mechanics methods for the assessment of the material is obvious. A short summary of the methods of technical fracture mechanics including possibilities of determination of crack resistance curves is given. Vulcanizates on the basis of SBR 1500 with various sulfur and carbon black contents were investigated. For describing the crack initiation and crack propagation behavior, several fracture mechanics examination methods were applied. Tear‐analyzer results were used to assess the crack propagation behavior under fatigue‐like loading conditions. Furthermore, for the characterization of the crack resistance of the materials under impact‐like loading conditions, instrumented tensile‐impact tests were performed. To obtain information about the initiation and propagation of a stable crack, quasi‐static fracture mechanics tests were applied. The results of the several tests are discussed in dependence on sulfur and carbon black contents. We found a non‐monotonous behavior of the toughness as a function of carbon black loading. An explanation is given in connection with a percolation‐like transition in filler morphology on larger length scales.

Schematic crack propagation curve for characterizing the fatigue behavior of the vulcanizates recorded in a TFA test.     

Zur Selbstdiffusion von Benzol und Azeton in Polymethylmethacrylat

The selfdiffusion coefficients of acetone and benzene are studied in the systems acetone/poly(methylmethacrylate) and benzene/poly(methylmethacrylate) by means of the spin echo technique as function of concentration and temperature. From the dependence of temperature, the activation energies are calculated as function of concentration. The dependence of concentration of the selfdiffusion coefficients is discussed using the theory of Free Volume according to FUJITA. The Free Volume of the poly(methylmethacrylate) is calculated as function of temperature.