Coexistence of three ferroelectric phases and enhanced piezoelectric properties in BaTiO3–CaHfO3 lead-free ceramics

Perovskite ferroelectrics possess the fascinating piezoelectric properties near a morphotropic phase boundary, attributing to a low energy barrier that the results in structural instability and easy polarization rotation. In this work, a new lead-free system of (1-x)BaTiO₃-xCaHfO₃ was designed, and characterized by a coexistence of ferroelectric rhombohedral-orthorhombic-tetragonal (R-O-T) phases. With the increase amount of CaHfO₃ (x), a stable coexistence region of three ferroelectric phases (R-O-T) exists at 0.06 ≤ x ≤ 0.08. Both large piezoelectric coefficient (d₃₃～400 pC/N), inverse piezoelectric coefficient (d₃₃^*～547 pm/V) and planar electromechanical coupling factor (k_p～58.2%) can be achieved for the composition with x = 0.08 near the coexistence of three ferroelectric phases. Our results show that the materials with the composition located at a region where the three ferroelectric R-O-T phases coexist would have the lowest energy barrier and thus greatly promote the polarization rotation, resulting in a strong piezoelectric response.     

A refined algorithm for multisensor image registration based on pixel migration.

Multimodality image registration via pixel migration is a powerful approach. However, it suffers from a serious problem--the global maximum on the sum of squared gradient magnitude (SSG) surface does not correspond to the correct solution of registration. To solve the problem, we partition the search space into feasible and infeasible regions. The genetic algorithm (global optimizer) is used to obtain a good initial estimate of registration parameters and followed by a fast refining with Powell's approach (local optimizer). The experimental results demonstrate that the use of this modified pixel migration algorithm on multisensor image registration is very effective.     

The band areas of proteins determined by fluorescent scanning in the commercial automated gel electrophoresis apparatus

An automated gel electrophoresis apparatus, recently available commercially, allows one to follow the band during electrophoresis in real time, and lends itself therefore to an evaluation of bandwidth as a function of migration time (the dispersion coefficient), resolution and band shape. These determinations assume the constancy of band area with migration time and at various gel concentrations. The purpose of the present study was to verify these assumptions. Representative proteins and sodium dodecyl sulfate (SDS)-proteins, either natively fluorescent or fluorescein carboxylate labeled, were found to exhibit band areas which approach constancy as a function of migration time in both agarose and polyacrylamide gel electrophoresis, provided that (i) the protein concentration under the band was low enough to obviate self-quenching of fluorescence; (ii) the separation of the protein of interest from contaminants had progressed sufficiently during the time at which band areas were measured; (iii) the baseline under the peak was sufficiently well defined. However, band areas decrease with increasing gel concentration. Protein peaks exhibited leading and trailing tails. The ratio of the combined tail area to total area appeared to be near-constant at varying migration times. However, that ratio increases with increasing gel concentration. The tail area does not appear to be an artifact of fluorometric detection since it is reproduced upon fluorimetric analysis of the protein eluted from gel slices after electrophoresis. However, it may be due to photochemical destruction under the conditions of repetitive fluorometric peak detection.     

Quantitative prediction of the degree of pollution of effluent from reactive dye mixtures

By using mathematical formulae developed in previous studies, certain pollution parameters of dye effluent obtained from reactive dyeing with a single dye can be predicted with good accuracy. In this study, the degree of pollution of reactive dyeing effluent using dye mixtures was also predicted by other approaches, such as linear and non-linear regression. The prediction accuracy was found to be satisfactory.     

Itemset trees for targeted association querying

Association mining techniques search for groups of frequently co-occurring items in a market-basket type of data and turn these groups into business-oriented rules. Previous research has focused predominantly on how to obtain exhaustive lists of such associations. However, users often prefer a quick response to targeted queries. For instance, they may want to learn about the buying habits of customers that frequently purchase cereals and fruits. To expedite the processing of such queries, we propose an approach that converts the market-basket database into an itemset tree. Experiments indicate that the targeted queries are answered in a time that is roughly linear in the number of market baskets, N. Also, the construction of the itemset tree has O(N) space and time requirements. Some useful theoretical properties are proven.     

The binding of substrates and inhibitors to the metal center of myoinositol monophosphatase

The synthetic substrate anthraniloyl-beta-glycerol-P binds to myoinositol monophosphatase with a Kd = 5 microM at pH 7.5. The anthraniloyl chromophore, excited at 330 nm, sensitizes the long lived luminescence of bound Tb(III) at 490, 545, 585 and 620 nm. Assuming a mechanism of radiationless energy transfer, the actual distance of separation between the donor-acceptor pair was calculated to be R = 10 A. Tb(III) binds to the monophosphatase with a Kd = 2 microM, whereas Ca-(II) displaces the lanthanide at concentrations above 0.1 mM. The binding studies support the notion that Tb(III), Ca(II) and Mg(II) interact with a common binding site on the protein. Phosphate ion, a strong competitive inhibitor, perturbs the luminescence of bound Tb(III), whereas the substrate beta-glycero-P has no effect on the luminescence yield and long-lived emission of bound Tb(III). It is suggested that the phosphate group of the substrate is not in direct contact with the metal ion coordinated to several amino acid residues of the enzyme.     

Diurnal thermal cycling effects on microwave signatures of thin seaice

To investigate effects of diurnal thermal cycles on C-band polarimetric backscatter and millimeter-wave emission from sea ice, the authors carried out a winter experiment at the outdoor geophysical research facility (GRF) in the cold regions research and engineering laboratory (CRREL), the ice sheet grew from open sea water to a thickness of 10 cm in 2.5 days, during which they took polarimetric backscatter data with a C-band scatterometer, interlaced with brightness temperature measurements at 90 GHz in conjunction with meteorological and sea ice characterizations. The initial ice growth in the late morning was slow due to high insolation. As the air temperature dropped during the night, the growth rate increased significantly. Air temperature changed drastically from about -12 to -36°C between day and night, the diurnal thermal cycle repeated itself the next day and the growth rate varied in the same manner. Ice temperature profiles clearly show the diurnal response in the ice sheet with a lag of 2.5 h behind the time of the maximum short-wave incident solar radiation. The diurnal cycles are also evident in the millimeter-wave brightness temperature data, measured sea ice backscatter revealed substantial diurnal variations up to 6 dB with repeatable cycles in synchronization with the temperature cycles and the brightness temperature modulations, the diurnal cycles in backscatter indicate that the dominant scattering mechanism related to thermodynamic processes in sea ice is reversible, a diurnal backscatter model based on sea ice electrodynamics and thermodynamics explains the observed diurnal signature. This work shows that diurnal effects are important for inversion algorithms to retrieve sea ice geophysical parameters from remote sensing data acquired with a satellite synthetic aperture radar (SAR) or scatterometer on Sun-synchronous orbits     

Development of the bi-directional ultrasound system for base of tongue imaging

The use of conventional ultrasound systems to image the upper airway has been limited because ultrasound energy is attenuated by the air column. In an attempt to study upper airway geometry, we developed a computer controlled bi-directional ultrasound system which combines two conventional ultrasound devices with computer image processing to yield images of upper airway structures. Human studies and cadaver studies were performed to evaluate the system. Images acquired by the bi-directional ultrasound system were comparable to images from 3D volume rendered CT scans. This system may provide valuable data in the study of upper airway physiology and pathology.     

Tc trend in high-Tc superconductors

In our previous works, we have shown that most existing ceramic superconductors can be considered to be built of superconductor-semiconductor composite and we have estimated the change in phonon spectrum of the intrinsic superconductor unit if a semiconductor unit is attached to it. Moreover, the proximity effect under the size quantization condition has been examined in the superconductor-semiconductor composite. Each of the stated effects by itself could causeT _c enhancement in general as more semiconductor blocks are added to the system. We extend our study in this paper to analyze the combined actions of phonon spectral change and proximity effect without size quantization condition onT _c variation in members of the Tl₁ series of high-T _c superconductors. Our results indicate that an optimumT _c is obtained if the stated effects are included in the idealized unit cells of the superconductors made up of a superconductor-semiconductor array.     

Triangular ray-tube analysis of dielectric lens antennas

A new method of analysis for the radiation characteristics of dielectric lens antennas with arbitrary inner and outer surfaces is presented. The analysis is based on representing the feed illumination by a contiguous set of ray tubes and including the effects of surface reflections and ray divergence. Radiation patterns and the antenna gain are then computed by evaluating the closed-form expressions developed for the Kirchhoff's integral of the aperture fields. The validity of the analysis method has been demonstrated by comparing the computations with measured results of two different spherical lenses and a shaped lens configurations. The analysis method presented takes into account some of the practical aspects associated with lens design such as surface zoning to reduce the mass and surface matching to minimize the reflection loss