塔里木河下游生态输水对地下水补给量影响的研究

文章依据塔里木河下游段现有的2000—2020年的地下水监测数据,对生态输水地下水前后水面线方程进行拟合,并在水均衡原理的基础上,对经过了21次生态输水之后的塔里木河下游段地下水埋深时空变化特征进行分析,以此对地下水的补给量进行估算,以更好支持后续的生态输水.     

Conduction band states of transition metal (TM) high-k gate dielectrics as determined from X-ray absorption spectra

This paper uses X-ray absorption spectroscopy to study the electronic structure of the high-k gate dielectrics including TM and RE oxides. The results are applicable to TM and rare earth (RE) silicate and aluminate alloys, as well as complex oxides comprised of mixed TM/TM and TM/RE oxides. These studies identify the nature of the lowest conduction band d^* states, which define the optical band gap, E_g, and the conduction band offset energy with respect to crystalline Si, E_B. E_g and E_B scale with the atomic properties of the TM and RE atoms providing important insights for identification high-k dielectrics that meet performance targets for advanced CMOS devices.     

Difficult to Let Housing Association Stock in England: Property,Management and Context

Problems related to unpopular housing are not new in Britain's social rented sector. In the past, however, these have generally been associated with housing provided directly by the state through local authorities. For many, the term 'difficult to let' has become synonymous with large, ageing, poor quality estates managed under a centralised framework and subject to a long period of low investment and indifferent management. There has also been a long-standing assumption that social housing allocations systems tend to channel the most vulnerable tenants into the least desirable housing. In fact, the problem of difficult to let property is now as pervasive in the not-for-profit sector managed by housing associations as it is within council housing. In many cases the developments affected are small in scale and, in a significant proportion of cases, recently constructed. In explaining why property becomes difficult to let, the local and regional context is clearly important. The balance between social, economic and housing demand circumstances and property and estate characteristics varies between regions. There is relatively little evidence that difficult to let housing association properties are occupied by disproportionate numbers of the most severely disadvantaged tenants and this suggests that something has happened to modify the segregating effects of allocations systems observed in earlier studies. Nevertheless, this apparent change must be seen within the context of the general trend towards a residual role for social housing in its entirety. The social class and income range of new social sector tenants now is much diminished by comparison with earlier decades with few distinctions between the occupiers of difficult to let and other housing.     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

100 mK bolometers for the submillimetre common-user bolometer array (scuba) I. Design and construction

We describe the design and construction of bolometric detectors for SCUBA - the Submillimetre Common-User Bolometer Array for the James Clerk Maxwell Telescope in Hawaii. The instrument contains 131 individual detectors, in two arrays, optimized for the submillimetre atmospheric transmission windows. The detectors are cooled by dilution refrigeration to a temperature of 100 mK, so that the receiver performance will be limited by photon noise from the sky and telescope background in all wavebands. A future paper will describe the performance of the detectors with reference to typical data obtained during the laboratory commissioning period.     

Dynamic Testing of Prestressed Concrete Bridges and Numerical Verification

This paper describes different dynamic tests carried out on three bridges, B14, B15, and B13, over highway E19, which connects Brussels and Antwerpen in Belgium. Different excitation types are considered: a drop weight, a heavy truck on the bridge, and ambient vibrations mainly due to the traffic under the bridge. Finite-element models are constructed to support and verify the dynamic measurements. The modal parameters are extracted from the response time series using the data dependent system approach. A vector autoregressive model is developed and successfully applied to the measured responses in time domain. Good correlation between the finite-element simulations and the experiments is obtained.     

Effect of different rates of N-fertilizers on nodulation, nodule activities and growth of two field grown cvs. of soybean

The effect of N fertilizers on nodulation, nitrogenase, nitrate reductase activities and growth of two cultivars of soybean, Clark and Crauford was evaluated in a field experiment. KNO₃ or NH₄Cl were applied 27 days after planting at 0,16, 32, 64 and 128 kg N/ha. Nodulation and growth of both cultivars significantly increased when N was applied at low levels whereas specific N₂-ase activity (SNA) slightly and insignificantly increased. Cv Crauford showed a greater positive response than cv. Clark. Higher rates of KNO₃ and NH₄Cl (128 kg N/ha) significantly depressed nodulation and SNA but slightly decreased the plant dry matter. Cv. Crauford was more tolerant to N fertilizers than cv. Clark. The decline in SNA was ascribed to increased nitrate reductase activity (NRA) and higher accumulation of nitrites in nodule cytosol. NRA and nitrate contents in nodules of cv. Clark were greater than that in cv. Crauford. Results showed that NH₄ ⁺ is the preferred N source with occasional increases in nodule number and weight. This study provides an evidence for the nodulation and growth variability of soybean cultivars fertilized with different levels of N. The results also suggest that diminishing NRA could contribute to increased N₂ fixation and the interaction between NO₃ ^– assimilation and N₂ fixation is strongly dependent on the plant cultivar.     

Feature Selection and Extraction Methods for Power Systems Transient Stability Assessment Employing Computational Intelligence Techniques

One of the important aspects in achieving better performance for transient stability assessment (TSA) of power systems employing computational intelligence (CI) techniques is by incorporating feature reduction techniques. For small power system the number of features may be small but when larger systems are considered the number of features increased as the size of the systems increases. Apart from employing faster CI techniques to achieve faster and accurate TSA of power system, feature reduction techniques are needed in reducing the input features while preserving the needed information so as to make faster training of the CI technique. This paper presents feature reductions techniques used, namely correlation analysis and principle component analysis, in reducing number of input features presented to two CI techniques for TSA, namely probabilistic neural network (PNN) and least squares support vector machines (LS-SVM). The proposed feature reduction techniques are implemented and tested on the IEEE 39-bus test system and 87-bus Malaysia’s power system. Numerical results are presented to demonstrate the performance of the feature reduction techniques and its effects on the accuracies and time taken for training the two CI techniques.     

Observations of slip patterns on the surface of fatigued gold using the scanning tunnelling microscope

Observations of fatigue-induced slip patterns on the surface of polycrystalline gold (+99.9%) using the scanning tunnelling microscope (STM) are presented. The samples were cycled in four-point bending between zero and 0.0025 strain for 250 and 2500 cycles. STM observations of the sample fatigued for 250 cycles revealed broad slip bands 0.38–0.69 m wide containing narrow slip bands 0.015–0.123 m wide and fine slip lines 0.006 m wide. The depth of these features are 20–57 nm for broad slip bands, 3–7 nm for narrow slip bands, and approximately 2–4 nm for fine slip lines. The sample fatigued for 2500 cycles showed similar values for the width of the slip bands and slip lines except that their depth was increased by a factor of between 2 and 4 times for the narrow slip bands and the fine slip lines. Apparent persistent slip bands (PSBs) spaced 2.4 m, 300–500 nm deep were also observed. These results demonstrate that STM is a significant new tool for observing and distinguishing various types of fatigue-induced surface slip patterns on suitably prepared samples. The vertical resolution obtained with STM is vastly superior to current SEM and TEM methods.