Real-time X-ray diffraction study at different scan rates of phase transitions for dipalmitoylphosphatidylcholine in KSCN

A questionnaire survey was carried out to examine the attitudes and practices of Australian and New Zealand intensivists with regard to brain death and organ donation. A return rate of 82.5% was achieved. Fifty-eight per cent had written evidence of their own wishes to donate organs and 94% would agree to donation from a dependent. At least one intensivist is involved in certifying brain death on 95% of occasions. Intensivists are involved in the request for organ donation over 90% of the time although one-third do not believe that it is their role to request organ donation. Although two-thirds believe that the family should always be approached for organ donation, another 52 out of 254 indicated that it was their (the intensivist's) role to decide if families should be asked for organ donation. Possible reasons for not requesting are language or other communication problems, perceptions of cultural differences and degrees of family distress. Twenty per cent of respondents do not provide haemodynamic support before brain death confirmation. Australian and New Zealand intensivists overwhelmingly support the concept of brain death, current methods of confirmation of brain death, organ donation and transplantation. Possible reasons behind loss of potential donors include decisions not to resuscitate both before and after brain death is confirmed. Perceptions of family grief and cultural differences clearly inhibit requests for organ donation. A very few units have an effective policy on approaching families about organ donation. Intensivists have almost exclusive control over requests for organ donation and thus bear a full professional responsibility for this element of hospital practice.     

Laboratory evaluation of the XR-Bond Dentin/Enamel Bonding System

The shear bond strengths of the XR-Bonding System used in conjunction with Herculite composite, to the dentine of forty extracted human permanent first and second molars were determined after the test specimens were stored in physiological saline at 37 degrees C for 48 hours, one week, two weeks and four weeks, respectively. A shear load was applied to the base of the bonded composite cylinders with a knife-edged rod at a crosshead speed of 0.5 mm/minute. The shear bond strengths were expressed in megapascals (MPa). The quantitative microleakage of Class V preparations in dentine (cementum) in forty-eight extracted human maxillary permanent canines restored with the same dentinal bonding system and after storage in physiological saline at 37 degrees C for the same time intervals as for the shear bond strength tests, was determined. On the final day of each time interval the teeth were thermocycled X 500 in a 2 per cent methylene blue solution between 8 degrees C and 50 degrees C with a dwell time of 15 seconds. Microleakage was determined by a spectrophotometric dye-recovery method and expressed in microgram dye/restoration. There was a significant trend for the shear bond strengths to increase with duration of storage (p = 0.01) but the quantitative microleakage was not significantly different (p = 0.75).     

On the performance of the CREL system

This paper presents the performance results of a comprehensive approach to the parallel execution of rule systems. It describes the semantics of a Concurrent Rule Execution Language, CREL, and the architecture of the system that compiles and executes CREL programs. The system has been designed to avoid run-time overhead by performing extensive compile-time analysis and by parallelizing compilation. Static dependency analysis, based on serializability, coupled with a set of optimizing transforms, partitions the program into subsets, called clusters. Clusters execute independently of each other and communicate though asynchronous message passing. At run time two additional sources of parallelism are exploited—run-time consistency checking allowing multiple rules to fire, and match-level parallelism. The CREL system is implemented on a Sequent Symmetry shared-memory computer. This paper presents the results of a factorial experiment that isolates and evaluates each source of parallelism in the CREL system and each possible combination of those methods. The results suggest that multiple-rule firing is the single most important source of parallelism in CREL programs and that the use of static dependency analysis based on serializability is instrumental to effectively exploit parallelism.     

Bayesian Availability Using Gamma Distributed Priors

Classical statistical estimation techniques have limited usage in predicting system availability when a system, e.g., a computer or telecommunications system, is highly reliable. A Bayesian solution is suggested in this paper. Gamma priors, which are rich in shapes, are assigned to the scale parameters of a gamma distributed component on-time and off-time. Estimation of the gamma priors follows engineer's past experiences for reliability modeling. Both steady-state and instantaneous availabilities are derived using Bayes Theorem. An illustration highlights the assessment and evaluation of the proposed availability measure.     

Phase composition and properties of solid solutions of GdFeO3–GdInO3 bulks

Solid solutions of the GdFeO₃–GdInO₃ system were prepared at 1550 °C by ceramic powder processing. The formulated composition was Gd(Fe_1−xIn_x)O₃ (GFI) with the indium contents at x = 0, 0.25, 0.5, 0.75, and 1.0. A stable phase of Gd(Fe_1/3In_2/3)O₃ in our system was identified by X-ray diffraction and phase composition analysis. Multi-phase morphologies were observed for GFI bulks with x = 0.5 and 0.75. Dielectric and electrical properties of the GFI bulks were investigated. The addition of 25% In³⁺ in GdFeO₃ had an obvious enhancement in polarization and led to an elevated resonance frequency. Dielectric properties of GFI bulks except GdInO₃ were strongly dependent upon the test frequency, which corresponded to the response of polarization mechanism. GdInO₃ displayed as a stable dielectric, which was frequency- and temperature-insensitive. GdInO₃ was thermally activated and became leaky until above 600 °C.     

Water bamboo husk reinforced poly(lactic acid) green composites

The water bamboo husk is one of major agricultural wastes in Taiwan. In this study, the powder obtained from the water bamboo husk was added to poly(lactic acid) (PLA) to form novel reinforced biodegradable composites. Morphologies, mechanical properties, and heat resistance of these water bamboo powder reinforced composites were investigated. The results indicate that the char yields were increased as plant powder was incorporated to PLA. In addition, the mechanical properties were also enhanced due to the addition of powders. The increments of storage moduli of PLA were about 50–200%. Moreover, the increments of loss moduli of PLA were about 70–200%. On the other hand, the T_g of PLA was slightly decreased by the addition of powder, and this may improve the brittle characteristics of PLA. Furthermore, this type of reinforced PLA would be more environmental friendly than the artificial additive‐reinforced one. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Weak interactions and lessons from crystallization

Ideas derived from the study of the process of crystallization may provide insights into molecular recognition in biological systems. Both processes exploit the cooperativity which arises from the formation of a large array of weak interactions.     

Phenotypic analysis of antigen-specific T lymphocytes

Identification and characterization of antigen-specific T lymphocytes during the course of an immune response is tedious and indirect. To address this problem, the peptide-major histocompatability complex (MHC) ligand for a given population of T cells was multimerized to make soluble peptide-MHC tetramers. Tetramers of human lymphocyte antigen A2 that were complexed with two different human immunodeficiency virus (HIV)-derived peptides or with a peptide derived from influenza A matrix protein bound to peptide-specific cytotoxic T cells in vitro and to T cells from the blood of HIV-infected individuals. In general, tetramer binding correlated well with cytotoxicity assays. This approach should be useful in the analysis of T cells specific for infectious agents, tumors, and autoantigens.