Ring‐opening polymerization of lactones initiated by diphenylzinc–coinitiator systems

Diphenylzinc, alone or in combination with water and butanone as coinitiators, was used as a polymerization initiator system for a variety of lactones at varying temperatures. The resulting data indicate that the course of the polymerization is greatly influenced by the lactone structure, as well as by the molar ratio of coinitiator to diphenylzinc. When used alone, diphenylzinc exhibited high activity as an initiator in δ‐valerolactone polymerizations, although it was less efficient when used in the β‐butyrolactone and the β‐propiolactone polymerizations. Activity in the polymerization of β‐lactones was increased by adding small amounts of butanone or water. It was also observed that the diphenylzinc–butanone combination was more effective than the diphenylzinc–water mixture in the polymerizations of β‐butyrolactone and β‐propiolactone. Copyright © 2003 Society of Chemical Industry     

Manual dexterity of older Mexican American adults: a cross-sectional pilot experimental investigation

This paper reports results from an experimental pilot study performed to quantify the manual dexterity of older Mexican American adults. The Purdue pegboard test, a two-arm coordination test, and a hand-tool dexterity test were used in this study. To enable cross-sectional comparisons of manual dexterity measures of older Mexican American adults with young Mexican American adults, these tests were administered to 18 older Mexican American adults aged 63–85 (mean age: 71.3 years, SD: 7.0 years), recruited from senior recreation centers in El Paso, and eighteen young adults aged 21–32 (mean age: 25.6 years, SD: 3.8 years) recruited from the student body at the University of Texas at El Paso. For the Purdue pegboard test, the number of pegs placed in 30 s using the preferred hand, the non-preferred hand, and both hands were first individually monitored. Then, scores on an assembly task using the Purdue pegboard were obtained. For the two-arm coordination test, participants were required to trace a star pattern with a stylus using both hands. The time for task completion and the number of errors made during task performance were monitored. For the hand-tool dexterity test, participants were required to use common hand tools and remove nuts and bolts from one side of a wooden upright, and to assemble nuts and bolts in the corresponding holes on the other side of the upright. The time taken for task completion was recorded. Since modified Levene's test showed equality of variances, two sample t-tests, comparing the mean responses of older adults with the mean responses of young adults for each individual test, were conducted. Results indicate that responses for the older adults were statistically significant different (p<0.001) from young adults for all Purdue pegboard tasks. On the average, older adults performed significantly slower (p<0.001) than young adults on the two-arm coordination test, and committed more errors before task completion (p<0.05). Older adults also took longer to complete the hand-tool dexterity task compared to their younger counterparts (p<0.05). In addition to the t-tests, manual dexterity performance measures from older adults were regressed with age to determine the cross-sectional age effects on manual dexterity measures. Results indicate that all Purdue pegboard performance measures were significantly affected by age (p<0.05). The time to complete the two-arm coordination test was significantly linearly related to age (p<0.05). However, the number of errors committed by older adults in the performance of the two-arm coordination test was not significantly linearly related to age. Time to complete the hand-tool dexterity was also significantly linearly related to age (p<0.05). Accommodating age-related changes in manual dexterity is important for job design in industry, especially in industries employing older adults requiring significant assembly and hand-tool use.

Relevance to industry

Given the aging of the industrial workforce, it is important to understand how manual dexterity is affected by age, so that jobs requiring significant manual dexterity for task initiation, task performance and task completion are designed to fit older adult dexterity levels.     

Interface formed between visceral peritoneum and experimental polypropylene or polytetrafluoroethylene abdominal wall implants

The objective of this work was to study the healing process at the interface between biomaterial and visceral peritoneum. Implants of polytetrafluoroethylene (ePTFE) and polypropylene prostheses were introduced into the abdominal wall of New Zealand rabbits. The behaviour of the biomaterials was analysed using light and scanning electron microscopy and immunohistochemistry in which a specific anti-rabbit macrophage monoclonal antibody (RAM 11) was employed. According to macroscopic observation, there was significantly fewer adhesions prosthesis-viscera to ePTFE than to polypropylene implants. After ePTFE implantation, restoration of the peritoneum took place in an orderly fashion. When polypropylene was used, the peritoneum formed was a disorderly tissue in which small areas of haemorrhage and necrosis could be seen to coincide with the appearance of adhesions. The number of labelled macrophages peaked 14 days after ePTFE or polypropylene implantation, after which it decreased gradually. It is concluded that, given the low rate of adhesion provoked by PTFE, this material is ideal for implants contiguous to the peritoneal cavity viscera. The macrophage response does not determine the use of one material or the other. The structure of the newly formed peritoneum and development of adhesions depends on the porosity of the biomaterial.     

Contribution of the ozonation pre-treatment to the biodegradation of aqueous solutions of 2,4-dichlorophenol

The effect of ozonation on the biodegradability of 100-ppm aqueous solutions of 2,4-dichlorophenol has been investigated. BOD at 5, 10 and 21 days, BOD/COD and BOD/TOC ratios and the average oxidation state are presented. Biodegradability measured as BOD5/COD ratio was increased from 0 of the original solution to 0.25 at the moment of removing all the initial compound (corresponding to an ozone dose of 0.12 g L-1, 0.48 for BOD21/COD ratio). To test the effect of this pre-treatment, the biological oxidation of these pre-ozonated solutions was performed in two semi-continuous stirred tank reactors, one with non-acclimated sludge and one with acclimated-to-phenol sludge. The study showed that the TOC content of the pre-treated solution could be removed up to 68% by an aerobic biological treatment as well as co-digested with municipal wastewater (TOC removal up to 82%), with similar operating retention times to a municipal wastewater plant (12-24 h). Kinetic studies based on Monod model have also been carried out. Pseudo-first-order kinetic constants were found to be in the range of 0.5-0.8 L g TVSS-1 h-1.     

Utility of Albicans ID plate for rapid identification of Candida albicans in clinical samples. Rapid identification of Candida albicans

A clinical study was carried out in an attempt to assess the efficacy of a newly designed electric toothbrush compared to a conventional manual toothbrush using the American Dental Association's protocol for evaluating toothbrushes. An Oral-B 35 manual toothbrush, which served as the control, was compared to the Plaq & White125 electric toothbrush. Examinations were performed by two calibrated examiners at baseline, day 15 and day 30. Examinations included the gingival index, plaque index and bleeding index. Mean indices were calculated and compared between the two brushes using the repeated measures multiple analysis of variance. No statistically significant differences between the mean indices on the three examination days were observed following the use of the manual or the electric toothbrushes. The results of this study demonstrate that the electric toothbrush was numerically more effective than the manual toothbrush in reducing supragingival plaque levels, either before or after brushing, at each examination date compared to baseline plaque values. However, this difference was not statistically significant. This and other findings concluded that the Plaq & White toothbrush is comparable to the control ADA-accepted toothbrush.     

Patients with rheumatoid arthritis: study of the correlation between density of glucocorticoid receptors in synovial cells and clinical response to steroidal treatment

BACKGROUND: The target cellular response to glucocorticoids is proportional to the concentrations or affinity of specific receptors to these substances. AIM: To look for a correlation between glucocorticoid receptor concentrations in synovial wall cells and the clinical response to steroidal treatment in patients with rheumatoid arthritis. PATIENTS AND METHODS: Twenty eight patients with rheumatoid arthritis were studied. Each subject was subjected to a synovial biopsy, in which a dry radioautographic technique for diffusible compounds was used. Patients were treated afterwards with three 500 mg intravenous pulses of methilprednisolone. RESULTS: A mean of 44.8% of synovial cells (range 30.1-62.8%) had binding sites for 3H dexamethasone. All patients had a significant clinical improvement after methylprednisolone. Multiple regression analysis did not show a correlation between clinical response and glucocorticoid receptor concentration. CONCLUSIONS: The lack of association between glucocorticoid receptor concentrations and clinical response could be due to the large steroid dose used, that saturated all available receptors.     

Changes in serum lipids in rats treated with oral cooper

Disturbances in lipid metabolism during copper deficiency in rats are well recognized. Copper deficiency is associated with the spontaneous retention of hepatic iron. Previous studies have reported that hypercholesterolemia and hypertriglyceridemia are associated with elevated hepatic iron concentrations in copper deficient rats. There was a direct relationship between the magnitude of blood lipids and the concentration of hepatic iron. Based on these data, it has been hypothesized that iron was responsible for the development of lipemia of copper deficiency. In this study was determined the effect of increasing doses of Cu(10, 20 and 50 ppm) in the diet, on the serum total lipids, total cholesterol, triglycerides (triacylglicerols), phospholipids, non-esterified fatty acids (NEFA) and liver iron and zinc concentrations in normal rats. The results were compared with normal rats that received a balanced diet containing 0.6 and 6 ppm of Cu, respectively. The results show that Cu-supplement diminished the cholesterol and triglyceride serum levels, increased the level of phospholipids, NEFA and concomitantly decreased the hepatic concentrations of Fe and Zn. There was a statistically significant (p < 0.05) simple correlation between triglycerides and liver Fe (r = 0.917; R2 = 64.03%), cholesterol and liver Zn (r = 0.872; R2 = 76.07%), cholesterol and liver Fe (r = 0.995; R2 = 99.10%), liver Fe and liver Cu (r = -0.612), liver Fe and liver Zn (r = 0.837), liver Cu and liver Zn (r = -0.612), and serum triglycerides and liver Zn (r = 0.967). The mechanism(s) by which Fe and Zn determine these changes is not known; none of the enzymes that act in cholesterol and triglyceride metabolism and biosynthesis require Fe and/or Zn. The increase of NEFA is due to changes in the process of lipolysis and re-esterification of the fatty acids in blood. However, additional studies are needed for the precise mechanisms of this interrelationships to be clarified.     

Hierarchical type-2 neuro-fuzzy BSP model

This paper presents a novel hybrid interval type-2 neuro-fuzzy inference system, with automatic learning of all its parameters, to handle uncertainty. This new model, called hierarchical type-2 neuro-fuzzy BSP model (T2-HNFB), combines the paradigms of the type-2 fuzzy inference systems and neural networks with recursive partitioning techniques (binary space partitioning - BSP). The model is able to automatically create and expand its own structure, to reduce limitations on the number of inputs and to extract fuzzy linguistic rules from a dataset, as well as to efficiently model and manipulate most types of uncertainty existing in real situations. In addition, it provides an interval for its output, which can be regarded as a measure of uncertainty and constitutes important information for real applications. In this context, this model overcomes the limitations of the conventional type-2 and type-1 fuzzy inference systems. Experimental results show that the results provided by the T2-HNFB model are close to and in several cases better than the best results supplied by the other models used for comparison.     

IP Squared: Internet Standards and Intellectual Property

Standards-development organizations (SDOs) comprise participants from large and small companies, academia, and the open source community. The participants come with varying backgrounds with regard to copyright and patents in the areas that are being standardized, and the SDOs must deal with these issues in ways that both satisfy the participants (and their employers) and result in useful standards. Each SDO — including the IEEE — has its own intellectual property (IP) policy. This issue, we look at how the IETF handles IP, in an overview cowritten by an attorney who has represented the IETF for some years and the current IETF Chair.