Colorimetric evaluation of thermooxidative degradation of nylon 6 fibers

Nylon 6 fibers were annealed in air at 160°C for periods ranging from 1 to 10 h. Their spectral reflectance values were measured. Color parameters, including luminance factor, dominant wavelength, purity, and the color difference between annealed nylon 6 fiber samples and unheated ones were calculated. The observed variations in the colors of samples were assumed due to the thermal and oxidation degradations. The behavior of the color parameters with heating duration was compared with the general kinetic curve of thermooxidative degradation of polymers and the match between them is discussed. The color difference ΔE values is recommended for monitoring the thermooxidative degradation of nylon 6 fibers. © 1995 John Wiley & Sons, Inc.     

Synthesis and evaluation of 99m Tc-NIDA and 99m Tc-DMIDA complexes for hepatobiliary imaging

1-Naphthylcarbamoylmethyliminodiacetic acid (NIDA) and diphenylmethylcarbamoylmethyliminodiacetic acid (DMIDA) were synthesized, characterized, and labeled with ^99m Tc using SnCl₂ as reducing agent. The parameters affecting the yield of ^99m Tc-NIDA and ^99m Tc-DMIDA were studied in detail. The optimum conditions ensuring high yield of ^99m Tc-NIDA (94.2 ± 2%) and ^99m Tc-DMIDA (93.1 ± 2%) are as follows: 30 mg of NIDA or DMIDA, 0.3 mg of SnCl₂·H₂O, pH 6, 15 min. The biodistribution in mice injected with ^99m Tc-NIDA and ^99m Tc-DMIDA showed high liver uptake at 10 min post injection, with fast biliary excretion. Accumulation of the activity in kidneys was negligible, especially after a long time post injection. Both ^99m Tc-NIDA and ^99m Tc-DMIDA can be applied as hepatobiliary imaging agents for the evaluation of the functional status of the hepatocytes and the patency of the biliary duct.     

Applicability of flashing desalination technique for small scale needs using a novel integrated system coupled with nanofluid-based solar collector

The present study introduces an attempt for the application of flash desalination technique for small scale needs. An integrated system uses a flashing desalination technique coupled with nano-fluid-based solar collector as a heat source has been made to investigate both the effect of different operating modes and that of the variation of functioning parameters and weather conditions on the fresh water production. The flashing unit is performed by similar construction design technique of commercial multi-stage flashing (MSF) plant. The thermal properties of working fluid in the solar collector have been improved by using different concentrated nano-particles. Cu nano-particle is used in the modeling to determine the proper nano-fluid volume fraction that gives higher fresh water productivity. An economic analysis was conducted, since it affects the final cost of produced water, to determine the cost of fresh water production. Although a system may be technically very efficient, it may not be economical. The effect of different feed water and inlet cooling water temperatures on the system performance was studied. The mathematical model is developed to calculate the productivity of the system under different operating conditions. The proposed system gives a reasonable production of fresh water up to 7.7 l/m²/day under the operation conditions. Based on the cost of energy in Egypt, the estimated cost of the generated potable water was 11.68 US$/m³. The efficiency of the system is measured by the gained output ratio (GOR) with day time. The gained output ratio (GOR) of the system reaches 1.058. The current study showed that the solar water heater collecting area is considered a significant factor for reducing the water production cost. Also, the produced water costs decrease with increasing the collecting area of the solar water heater. The volume fractions of nano-particle in solar collector working fluid have a significant impact on increasing the fresh water production and decreasing cost.     

On the Electromagnetic Interference Fringes Method in Geophysical Prospecting Applications

The method of electromagnetic interference fringes for the prospecting of conductive subsurfaces inside the earth is reviewed. The fields radiated by an electrically small horizontal loop situated on the earth's surface are derived and expressed in terms of different interfering wave components. The variable distance interference fringes (VDIF) method and the variable frequency interference (VFIF) method of prospecting are considered, and an interpretation procedure using the data obtained from both methods is suggested.     

Coriander (<Emphasis Type="Italic">Coriandrum sativum</Emphasis> L.) seed oil improves plasma lipid profile in rats fed a diet containing cholesterol

Coriander (Coriandrum sativum L.) seed oil (COR) is a promising oil with high levels of bioactive compounds. Very little information, however, is available on the effect of administration of COR on different aspects of plasma lipid profile in experimental animals. In view of the important implications, the effect of administration of COR and oil blend [a mixture of soybean oil, coriander oil and sunflower oil (4:2:4, w/w/w; Blend)] on the profile of plasma lipids was investigated in 24 male albino rats placed on a cholesterol-rich (1%) basal diet as compared to rats on a cholesterol-free basal diet. Coriander seed oil and Blend were analyzed for composition of fatty acid, sterol and tocopherol. The levels of bioactive compounds (sterols and tocopherols) were higher in COR than in the Blend. In addition, the antiradical potential of COR and Blend was measured and the results showed that COR had stronger radical scavenging activity than Blend. In the biological experiment, rats were divided into four diet groups. The negative control group (control) consumed the basal diet (BD) only, which contained wheat starch, casein and cellulose, as well as mineral and vitamin mixtures. To the BD were added 1 g/100 g cholesterol (Chol/group), or both (Chol/COR group) and (Chol/Blend group). The groups did not differ before the experiment, which lasted 60 days. Plasma total lipids (TL), triacylglycerols (TAG), total cholesterol (TC), low-density lipoprotein-cholesterol (LDL-C) and high-density lipoprotein-cholesterol (HDL-C) were measured at day 15, 30, 45 and 60 during the experiment period. Generally, COR and Blend-supplemented diets decreased the levels of TL, TC, TAG and LDL-C in plasma. In addition, significant increase in the levels of HDL-C was observed for Chol/COR and Chol/Blend groups. The results demonstrated that COR, and to a relatively lesser degree Blend, have hypocholesterolemic properties in rats fed a cholesterol-rich diet.     

Two models for two-dissimilar-unit cold standby redundant system with partial failure and two types of repairs

This paper deals with the availability function and the mean time to the first failure for two models of a cold standby redundant system with two different types of repair. Each model consists of two dissimilar units. In the first model, the operative unit has two modes of operation, normal mode and partial failure mode. The standby unit has one mode of operation, normal mode. In the second model, each unit has three modes of operation, normal mode, failure mode and total failure mode. Both models are analyzed by the semi-Markov process technique, assuming that the failure time and repair time distributions are general and arbitrary. Some reliability measures of interest to system designers as well as operations managers have been obtained. Moreover, we give computer programs for calculating the MTSF for each model (see Appendix).     

On some fractional evolution equations

In this paper the solutions of some evolution equations with fractional orders in a Banach space are considered. Conditions are given which ensure the existence of a resolvent operator for an evolution equation in a Banach space.     

A simulation optimisation tool for planning of low-income housing projects

Construction of low-income housing projects is a recurring process and is associated with uncertainties that arise from the unavailability of resources. This paper presents a case study that discusses how computer simulation and optimisation are used to aid government agencies and/or contractors in planning of such projects. It illustrates the optimisation of project objectives, taking into consideration the interaction amongst involved resources. As such, total duration and the associated total costs, including direct and indirect costs, can be estimated and optimised. One Youth Habitation project that is executed in 6th of October City in Egypt is analysed in a step-by-step procedure to demonstrate the capability of proposed computer simulation and optimisation prototype (named LIHouse{_}Sim) in the modelling construction of low-income housing projects using bearing block walls with hollow core technique. The presented tool proves its practicality to contractors in estimating the time and costs of the recurring process of low-income housing construction, considering complex interdependencies between construction resources and the uncertainties associated with construction activities. The LIHouse{_}Sim prototype is used to perform a wide analysis for the alternative of the effective optimisation criteria in the bearing block walls/hollow core technique and for the genetic algorithm optimisation approach elements.