Effect of Supports and Promoters on the Performance of Ni-Based Catalysts in Ethanol Steam Reforming

Ethanol steam reforming (ESR) is one of the potential processes to convert ethanol into valuable products. Hydrogen produced from ESR is considered as green energy for the future and can be an excellent alternative to fossil fuels with the aim of mitigating the greenhouse gas effect. The ESR process has been well studied, using transition metals as catalysts coupled with both acidic and basic oxides as supports. Among various reported transition metals, Ni is an inexpensive material with activity comparable to that of noble metals, showing promising ethanol conversion and hydrogen yields. Additionally, different promoters and supports were utilized to enhance the hydrogen yield and the catalyst stability. This review summarizes and discusses the influences of the supports and promoters of Ni-based catalysts on the ESR process.     

Experimental data and approximate estimation for dissociation time of hydrate plugs

New experimental data coupled with a numerical model and an approximate solution are proposed to predict dissociation time of hydrate plugs in oil sub-sea pipelines. The experimental hydrate plugs are dissociated by the method of symmetric depressurisation, both in a specially designed apparatus and a classical batch reactor. The agreement between the estimation of the model and the experimental data and the simplicity of the approximate equation presents an advantage in estimating the time of hydrate plug dissociation in pipelines.     

A typed functional extension of logic programming

A logic language is suitable for specification if it is equipped with features for data abstraction and modularization. In this paper, an effective mechanism to incorporate function and type into logic programming is presented as the means to embed data abstraction mechanism into logic programming. This incorporation is essentially based on Horn clause logic with equality and a polymorphic type system that is an extension of Mycroft and O’Keefe’s system. This paper also presents an implementation based on Warren Abstract Machine (WAM) and shows the performance, along with a comparison with WAM.     

Personalized identification of abdominal wall hernia meshes on computed tomography

An abdominal wall hernia is a protrusion of the intestine through an opening or area of weakness in the abdominal wall. Correct pre-operative identification of abdominal wall hernia meshes could help surgeons adjust the surgical plan to meet the expected difficulty and morbidity of operating through or removing the previous mesh. First, we present herein for the first time the application of image analysis for automated identification of hernia meshes. Second, we discuss the novel development of a new entropy-based image texture feature using geostatistics and indicator kriging. Third, we seek to enhance the hernia mesh identification by combining the new texture feature with the gray-level co-occurrence matrix feature of the image. The two features can characterize complementary information of anatomic details of the abdominal hernia wall and its mesh on computed tomography. Experimental results have demonstrated the effectiveness of the proposed study. The new computational tool has potential for personalized mesh identification which can assist surgeons in the diagnosis and repair of complex abdominal wall hernias.     

Electrochemical behavior of Sn8Hg (gamma-2) and dental amalgam in a phosphate buffer solution

The gamma-2 phase (Sn₈Hg) and a dental amalgam in phosphate buffer have been studied by means of potentiostatic and galvanostatic techniques, along with a rotating ring-disc electrode (RRDE). The analysis of results has shown that phosphate ions play an important role in the corrosion of amalgam. The anodic reaction leads to the formation of soluble species and a passivating film, which is probably composed of tin hydroxide and tin phosphate.     

丙烯酸粉末罩光清漆耐冲击性能的研究

针对汽车用甲基丙烯酸缩水甘油酯(GMA)类丙烯酸粉末罩光清漆耐冲击性能差的问题，通过使用3种不同的增韧方法进行改进。这3种方法分别是原位聚合法加入纳米TiO2、引入一元酸增加涂膜的柔性支链以及加入新型的纳米助剂多面低聚倍半硅氧烷(POSS)，均使涂膜的耐冲击性得到了很大的提高。但它们对涂膜其他性能的影响各不相同，本详细讨论了3种方法对涂膜性能的影响，并探讨了纳米TiO2、一元酸、POSS影响涂膜性能的机理。     

A printed circuit board capacitive sensor for air bubble inside fluidic flow detection

This paper presents a three-electrode capacitive fluidic sensor for detecting an air bubble inside a fluidic channel such as blood vessels, oil or medical liquid channels. The capacitor is designed and fabricated based on a printed circuit board (PCB). The electrodes are fabricated by using copper via structure through top to bottom surface of the PCB. A plastic pipe is layout through the capacitive sensor and perpendicular to the PCB surface. Capacitance of sensor changes when an air bubble inside fluidic flow cross the sensor. The capacitance change can be monitored by using a differential capacitive amplifier, a lock-in amplifier, filter and an NI acquisition card. Signal is processed and calculated on a computer. Air bubble inside the liquid flow are detected by monitor the unbalance signal between the three electrode potential voltages. Output voltage depends on the volume of the air bubble due to dielectric change between capacitor’s electrodes. Output voltage is up to 53 mV when an 2.28 mm³ air bubble crosses the sensing channel. Air bubble velocity can be estimated based on the output pulse signal. This proposed fluidic sensor can be used for void fraction detection in medical devices and systems; fluidic characterization; and water–gas, oil–water and oil–water–gas multiphase flows in petroleum technology. That structure also can apply to the micro-size for detecting in microfluidic to monitor and control changes in microfluidic channels.     

Development of a quadruped walking robot AiDIN-III using biologically inspired kinematic analysis

This paper presents a bio-inspired mechanism design for a quadruped walking robot. The approach is derived from the observation on the behaviors of quadruped locomotion, skeletal structure, and the study on the stability of walking based on morphological analysis. In the first, we define the design parameters such as the dimensions of the body and limbs, the center of mass position, and locomotion mechanisms based on surveys on the literatures from biologists. Then, by using the parameters, we propose an useful framework for determining the design parameters of a quadruped walking robot. For implementations, we manufacture a dog-type self-contained quadruped walking robot, named AiDIN-III (Artificial Digitigrade for Natural Environment version III) and the effectiveness of the proposed idea is validated via experimental works.