Autocorrelation model-based identification method for ARMA systems in noise

A novel method for parameter estimation of minimum-phase autoregressive moving average (ARMA) systems in noise is presented. The ARMA parameters are estimated using a damped sinusoidal model representation of the autocorrelation function of the noise-free ARMA signal. The AR parameters are obtained directly from the estimates of the damped sinusoidal model parameters with guaranteed stability. The MA parameters are estimated using a correlation matching technique. Simulation results show that the proposed method can estimate the ARMA parameters with better accuracy as compared to other reported methods, in particular for low SNRs.     

Response of shielding structures to explosive loading

This paper presents the results of a numerical and experimental study of the behaviour of a brass hopper held in a supporting structure subjected to internal explosive loading. The structure is typical of those employed during the manufacture of explosive accessories. In such processes the hopper acts as a feed for the explosive while the encasing structure both supports the hopper and provides protection to the surroundings in the event of accidental initiation. The finite element model includes representations of the explosive, the brass hopper and the steel supporting structure. The boundaries between the components are treated as sliding and separable interfaces. Analysis is performed using the Oasys DYNA3D (version 5.1) finite element program. The numerical predictions for the deformations are compared with test results. The DYNA3D finite element code is shown to be an effective tool for the appriasal of this type of protective structure under explosive loading. Both the numerical and experimental studies point the way to improvements in the current design.     

A simplified method for modelling the effect of blinds on window thermal performance

An approximate method is presented for predicting the effect of a louvered blind on the centre‐glass thermal performance of a fenestration. The method combines a one‐dimensional heat transfer model with data from a numerical simulation of the window and blind. Sample results for a blind mounted on the indoor surface of a window show the effect of blind slat angle on heat transmission. Both summer and winter conditions are considered. The results show that a louvered blind can improve the U‐value of a standard double‐glazed window by up to 37%. Also, the radiation heat exchange with the room can be dramatically reduced (by up to 60%), which will improve the level of occupant comfort. However, there was found to be a trade‐off between U‐value and occupant comfort; placing the blind closer to the window improves the U‐value, but increases the radiation heat exchange with the room. The predictions from the present simplified method compare well with results from a full two‐dimensional computational fluid dynamics solution of the conjugate blind/window interaction. Copyright © 2005 John Wiley & Sons, Ltd.     

Electron transfer reactions in RB90745, a bioreductive drug having both aromatic N-oxide and nitroarene moieties

This study defines the current modes of treatment of patients with uterine fibromas with a review of the literature. Progesterone treatments appear to be principally used in cases of minor functional symptomatology and we discuss recent studies of mifepristone. GnRH agonists are particularly effective in preoperative treatment for conservative surgery. The indications and results of hysteroscopic resection and laparoscopic myomectomy are compared to those of classic myomectomy and hysterectomy. The indications for myolysis are discussed.     

The interaction of dexamethasone with ondansetron on drug-induced emesis in the ferret

The characteristics of the five Korean isolates of Japanese encephalitis (JE) virus were compared with those of the already reported JE virus strains from Japan and China using the hemagglutination test and polymerase chain reaction direct sequencing of the JE virus genomes (capsid/premembrane, envelope region). The hemagglutination patterns of all the isolates were distinctly different from the Nakayama-NIH strain. The optimal pH of hemagglutination of all the Korean isolates was 6.6-7.0 and the reaction range was broader than that of the Nakayama-NIH strain. The 198 nucleotide sequences in the capsid/premembrane gene region of the five Korean strains indicated that they were classified into the third genotype group, the JE strains from the countries in the temperate zone including the Nakayama-NIH, JaOArS982, and Beijing-1 strains. Four of the five Korean isolates formed a unique phylogenetic tree within the third genotype group, although the last one was genetically highly related to the Nakayama-NIH strain. The 251 nucleotide sequences in the envelope region of the five isolates were more divergent than the capsid/premembrane region. Four of the five isolates showed a large nucleotide divergency as compared with the JaOArS982 strain (< or = 12.4%), but the last one was similar to the JaOArS982 strain (98% of nucleotide homology). These results suggest the evolutionary divergence of the JE viruses isolated in Korea from the Japanese and Chinese strains and that there may exist at least two antigenically different JE virus strains in Korea.     

Structural Effects on the Adhesive Properties of Butadiene/Styrene Radial Teleblock Copolymers

The effects of butadiene/styrene ratio, monomer distribution, and molecular weight distribution and branching on the pressure sensitive adhesive properties of butadiene/ styrene radial teleblock copolymers are reported. Styrene content of polymers with varying structures shows a close relation with tack response, and styrene content and structure affect solution viscosity and shear adhesion. When part of the styrene is incorporated into the polybutadiene segment to yield a block progressively enriched in styrene (tapered block), solution viscosity and shear adhesion are reduced. When the butadiene segment is replaced by a block of randomly copolymerized butadiene and styrene, the polymers provide lower solution viscosities and shear adhesion but unchanged tack.

The molecular weight distribution of the radial teleblock polymers can vary from broad, highly branched compositions to narrow molecular weight distributions of almost Iinear polymers. The latter have relatively high solution viscosity and low shear adhesion, whereas the former polymers produce moderate solution viscosity but high shear adhesion. Tack is generally unaffected.     

Ultramicroscopy of association colloids formed from block copolymers

Ultramicroscopy studies have been made of micelle formation by two poly(styrene)-poly(isoprene) block copolymers in organic solvents (N,N-dimethylacetamide and n-decane respectively) and a poly(l-glutamic acid)-poly(l-leucine) block copolymer in an aqueous solution of 0.2M NaCl at pH = 4.0. The technique provides a method of determining the number-average translational diffusion coefficient) $\text{D}\text{?}{}_{\mathrm{n}}$, of association colloids and leads, via the Stokes-Einstein relation, to a measure of the number-average of the reciprocal hydrodynamic radius $\text{(R}{}_{\mathrm{<mtext>D</mtext><mtext>?</mtext>}}{}^1\text{)}{}_{\mathrm{n}}$ for spherical particles. Particles having a radius less than approximately 30 nm were too small to be detected by the technique.The ultramicroscopy results were compared with data obtained by laser light scattering photon correlation spectroscopy which provides a measure of the z-average translational diffusion coefficient. $\text{D}\text{?}{}_{\mathrm{z}}$. An additional comparison was made by carrying out measurements on two well-characterized poly(styrene/divinyl benzene) latices.     

Registration of confocal scanning laser microscopy and quantitative backscattered electron images for the temporospatial quantification of mineralization density in 18-month old thoroughbred racehorse articular calcified cartilage

Combined backscattered electron scanning electron microscopy (BSE SEM) and confocal scanning laser microscopy (CSLM) have been used to put tissue mineralization data into the context of soft tissue histology and fluorescent label information. Mineralization density (Dm) and linear accretion rate (LAR) are quantifiable parameters associated with mineralizing fronts within calcified tissues. Quantitative BSE (qBSE) may be used to determine Dm, while CSLM may be used to detect label fluorescence from which LAR is calculated. Eighteen-month old Thoroughbred horses received single calcein injections 19 and 8 days prior to euthanasia, labeling sites of active mineralization with fluorescent bands. Confocal scanning laser microscopy images of articular calcified cartilage (ACC) from distal third metacarpal condyles were registered to qBSE images of the same sites using an in-house program. ImageJ and Sync Windows enabled the simultaneous collection of LAR and Dm data. The repeatability of the registration and measurement protocols was determined. Dm profiles between calcein labels were explored for an association with time. Dm was 119.7 +/- 24.5 (mean +/- standard deviation) gray levels (where 0 = backscattering from monobrominated and 255 from monoiodinated dimethacrylate standards, respectively), while modal and maximum LAR were 0.45 and 3.45 microm/day, respectively. Coefficients of variation (CV) for Dm were 0.70 and 0.77% with and without repeat registration, respectively; CVs for LAR were 1.90 and 2.26% with and without repeat registration, respectively. No relationship was identified between Dm and time in the 11-day interlabel interval. Registration of CSLM to qBSE images is sufficiently repeatable for quantitative studies of equine ACC.