Polypropylene/Clay nanocomposites: Effect of compatibilizer on the thermal,crystallization and dynamic mechanical behavior

Polypropylene (PP)/clay nanocomposites are prepared using different grades of PP, compatibilizers, and organically modified clays. The melt intercalation of the PP is carried out in presence of a compatibilizer. The nanocomposites are characterized using various techniques for the structure and properties. X‐ray diffraction results indicate well‐defined structures. Thermogravimetric analysis indicates improved thermal stability of PP/clay nanocomposites. Isothermal crystallization studies carried out using differential scanning calorimeter illustrate enhanced crystallization of PP in all the nanocomposites. Optical microscopic study demonstrates that the nanocomposites can be crystallized at higher temperatures, exhibiting well‐defined birefringent structures. The dynamic mechanical analysis reveals higher storage moduli over a temperature range of ?40⁰C to 120⁰C for nanocomposites, and the extent of increase in the storage modulus is dependent on the type of compatibilizer used.     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.     

Microstructure evolution during batch annealing

Design of industrial annealing cycles requires recrystallization and grain growth studies, which are typically carried out under isothermal laboratory condition. The kinetics coefficients of these phase transformations are obtained from such studies, which are subsequently used in designing the industrial nonisothermal cycles using the additivity principles. However, the strong heating rate effects on the grain growth kinetics necessitate such kinetics studies using industrial thermal profiles. In the present work, the hot and cold spot cycles of an industrial batch annealing cycle for AIK grade steel have been simulated in a programmable laboratory furnace. Subsequently, the effect of annealing temperature, soaking time, and heating rate on the microstructural features, such as grain size distribution, grain shape anisotropy, and grain orientation, have been investigated through extensive quantitative microscopy. The implications of these results on the design of industrial batch annealing cycles have been discussed.     

Application of High Hydrostatic Pressure as a Pretreatment for Osmotic Dehydration of Banana Slices (Musa cavendishii) Finish-Dried by Dehumidified Air Drying

The process variables high hydrostatic pressure (HHP; 100–500 MPa), sucrose concentration (30–70 °Brix), immersion time (5–9 h) and immersion temperature (30–70 °C) were optimised to yield maximum water loss (WL), minimum solid gain (SG), minimum water activity (a _w) and minimum browning index (BI) during osmotic dehydration (OD) of banana slices (Musa cavendishii) pretreated by HHP using response surface methodology. The pressure-treated samples showed significantly higher WL and SG during OD (p?<?0.05), which was attributed to the rupture of cell wall with applied pressure, making the cells more permeable, also evident from the scanning electron micrographs of the banana tissue. The optimised operating conditions were: HHP of 200 MPa for a dwell time of 5 min at room temperature (26 °C), sucrose concentration of 60 °Brix, immersion time of 5 h and immersion temperature of 40 °C. A study of the concentration profiles during OD revealed no appreciable increase in SG and WL after 4 h; hence, immersion time was reduced to 4 h. The optimised product developed was dried to a moisture content of 15 % (wet basis) in a dehumidified air dryer at an air temperature of 40, 55 and 70 °C with a fixed air velocity of 3.8 m/s and relative humidity maintained at 20 %. The final dried product was analyzed for total soluble solids content, BI and a _w. A drying temperature of 55 °C was found to give superior quality OD banana slices in terms of reduced bulk, improved flavour, decreased a _w (<0.60), and reduced dehydration time and energy using HHP as a pretreatment.     

Green synthesis of silver nanoparticles from purple acid phosphatase apoenzyme isolated from a new source Limonia acidissima

Green synthesis of nanoparticles is regarded as a safe and non-toxic process whereas conventional synthesis using chemical methods produces toxic substance. This study provides a novel insight for enzymatic synthesis method of silver nanoparticles using purple acid phosphatase, isolated from Limonia acidissima (wood apple) as a new source and used in the synthesis of silver nanoparticles. Stable silver nanoparticles were produced by sonochemical method using apoenzyme as a stabilising and capping agent and were characterised by various physicochemical techniques like UV–Visible spectroscopy, Fourier-transform infrared, X-ray diffraction and transmission electron microscopy. X-ray study shows that nanoparticles are composed of silver and silver oxide. The synthesised nanoparticles exhibited excellent antimicrobial activity against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus.     

Texture and Microstructural Evolution in Pearlitic Steel During Triaxial Compression

This article presents the deformation behavior of high-strength pearlitic steel deformed by triaxial compression to achieve ultra-fine ferrite grain size with fragmented cementite. The consequent evolution of microstructure and texture has been studied using scanning electron microscopy, electron back-scatter diffraction, and X-ray diffraction. The synergistic effect of diffusion and deformation leads to the uniform dissolution of cementite at higher temperature. At lower temperature, significant grain refinement of ferrite phase occurs by deformation and exhibits a characteristic deformation texture. In contrast, the high-temperature deformed sample shows a weaker texture with cube component for the ferrite phase, indicating the occurrence of recrystallization. The different mechanisms responsible for the refinement of ferrite as well as the fragmentation of cementite and their interaction with each other have been analyzed. Viscoplastic self-consistent simulation was employed to understand deformation texture in the ferrite phase during triaxial compression.     

Evolution of Microstructure and Texture During Deformation and Recrystallization of Heavily Rolled Cu-Cu Multilayer

A Cu-Cu multilayer processed by accumulative roll bonding was deformed to large strains and further annealed. The texture of the deformed Cu-Cu multilayer differs from the conventional fcc rolling textures in terms of higher fractions of Bs and RD-rotated cube components, compared with the volume fraction of Cu component. The elongated grain shape significantly affects the deformation characteristics. Characteristic microstructural features of both continuous dynamic recrystallization and discontinuous dynamic recrystallization were observed in the microtexture measurements. X-ray texture measurements of annealing of heavily deformed multilayer demonstrate constrained recrystallization and resulted in a bimodal grain size distribution in the annealed material at higher strains. The presence of cube- and BR-oriented grains in the deformed material confirms the oriented nucleation as the major influence on texture change during recrystallization. Persistence of cube component throughout the deformation is attributed to dynamic recrystallization. Evolution of RD-rotated cube is attributed to the deformation of cube components that evolve from dynamic recrystallization. The relaxation of strain components leads to Bs at larger strains. Further, the Bs component is found to recover rather than recrystallize during deformation. The presence of predominantly Cu and Bs orientations surrounding the interface layer suggests constrained annealing behavior.     

Feasibility study of carbon capture and storage on NLC India Ltd

India is one of the largest growing economies in the world. It has a GDP of 2487.94 billion US dollars as of 2017. Around 61.297% of power generation is by utilising abundantly available lignite blended with imported coal. India is slowly cutting out its demand for imported coal from other countries. It has built its own lignite-based power plant to overcome the need of imported coal. The impact on cost of electricity (COE) and net power output (NPO) after retrofitting carbon capture and storage (CCS) over a lignite-based power plant of India is analysed. In this paper, a feasibility study is carried out for NLC India Ltd Barsingsar power plant by retrofitting CCS. The results obtained from the Integrated Environmental Control Model (IECM) Software are positively strong enough to encourage CCS implementation. Various strategies for utilising the CO₂ capture and carbon storage sites are suggested.     

Phase Transformations in Third Generation Gamma Titanium Aluminides: Ti-45Al-(5, 10) Nb-0.2B-0.2C

Third generation γ-titanium aluminides with nominal compositions Ti–45Al–5Nb–0.2B–0.2C and Ti–45Al–10Nb–0.2B–0.2C were investigated to identify the phase transformation and their morphological stability with temperature. Electron microscopy and differential scanning calorimetry were employed for the characterization of phases and for recording the corresponding transformations, respectively. It has been inferred that the order–disorder transformation temperatures α₂ → α increased with increasing Niobium (Nb), while the α-transus temperature decreases. The stability of the microstructure for both alloys with temperature were also investigated. Mass change measured for the heating rates 20 °C s⁻¹ and 30 °C s⁻¹ reveals that the alloy Ti–45Al–10Nb–0.2–0.2C shows stability up to 1100 °C, and the alloy Ti–45Al–5Nb–0.2B–0.2C is stable up to 900 °C. The orientation relationship between the phases indicates that with the change in shape of the α phase from lamellar to equiaxed, it deviates from the Blackburn orientation relationship.