Emission of pollutants from wood waste incineration at sawmills in Abeokuta metropolis,Nigeria

This paper reports an assessment of the effects of wood waste burning on air quality and the perceived human health in an urban setting. The concentrations of particulates and selected gases were monitored within the vicinity of sawmills in Abeokuta metropolis. The levels of CO, CO₂, SO₂, NO_x, NO₂, H₂S, CH₄ and particulates at distances from sawmill dumps were measured using portable samplers. Additionally, information on sawmill operations and health problems encountered by the exposed population were collected from a community survey. From the data analyses, between 60 and 100% of wood waste generated by sawmills were burned openly, leading to pollutants emission. The mean concentrations of PM_0.3–0.5 (32 523–40 284 μg/m³), NO₂ (1.0 ppm), SO₂ (3.3 ppm), CO (759 ppm) and CO₂ (4.9%) were higher than the permissible limits at 0–15 m from the dump sites. Almost all sampled parameters showed positive association (R = 0.90–0.98; p < 0.05) at sample sites. Moreover, distance of sites to the dumps explained 51–93% of the variation in parameters levels. Both respiratory and dermal diseases were frequently experienced by the exposed population. Strict land-use zoning, pollution abatement measures, environmental quality monitoring and waste-to-energy interventions are urgently required in the study area.     

Wind characteristics and energy potential assessment in Akure,South West Nigeria: econometrics and policy implications

This paper analysed 11 years of daily mean wind-speed data, measured at Akure, Ondo State, Nigeria, using Weibull and Rayleigh distribution functions. While both distributions showed good agreements in extreme-value estimation patterns, investigation of their wind-speed characteristics modelling criteria, using goodness-of-fit statistics, revealed that the wind data followed the Weibull more than Rayleigh. Monthly wind-speed of Akure city ranged from 1.41 to 4.24 m/s by the Weibull fittings and from 1.40 to 4.16 m/s by the Rayleigh fittings. Overall results, of 2.71 m/s (Weibull) or 2.70 m/s (Rayleigh) mean wind-speed and 18.51 W/m² (Weibull) or 22.26 W/m² (Rayleigh) mean power density, indicated Akure a low wind-speed site, requiring low wind-speed turbine for generating wind energy. Econometric analyses of power output simulations using such turbine system resulted in affordable wind energy cost. These bear policy implications for sustainable wind energy usage in this and similar regions of the world.     

Fluid flow phenomena in the electromagnetic stirring of continuous casting systems,part 1: the behaviour of a cylindrically shaped laboratory scale installation

A model is developed to calculate the flow field produced by electromagnetic stirring generated by a rotating magnetic field. This study has considerable importance due to its applicability to continuous casting systems. Three cases are considered, the first, in which steady continuous stirring is studied, and the numerical results are found to agree well with the experimental observations by other workers. In the second case, alternating stirring is examined, and the critical role of switching frequencies is discussed. Finally, a preliminary allowance is made for free surface deformation for the continuous stirring situation. The effective viscosity is deduced from the transport equations for K, the turbulence kinetic energy, and for ?, the rate of viscous dissipation. The transport equation for K is modified to account for turbulence enhancement due to electromagnetic effects.     

Fluid flow and tracer dispersion in shallow tundishes

A mathematical model is developed to describe fluid flow and tracer dispersion in shallow tundishes. Two tundish designs are considered, namely one with a point inlet and a point outlet, and another with a point inlet and a slot outlet. Each of these designs is investigated, both in the absence and presence of flow control devices, the latter consisting of either conventional use of dams and weirs, or a magnetic field imposed perpendicularly to the main flow direction.     

Quality assessment of laminated fillet blocks from blue whiting (Micromesistius poutassou)

Laminated fillet blocks made from blue whiting (Micromesistius poutassou) caught in February and April were assessed for quality. The total protein nitrogen value in February-caught fish was greater than the April-caught fish. The bone content, water content and pH values were consistently lower in the February fish than the April fish. Measurement of the acceptability of deep fried, breaded fingers made from the fish and compared with cod fingers produced from fish caught at the same time of year showed a consistent difference between the cod and blue whiting. In addition, the fish fingers from fish caught in February scored consistently higher than those caught in April. The implications of the findings are discussed.     

The role of gas plumes in agitation and mass transfer in metallurgical systems

A general three-dimensional model is developed for the multi-phase flow resulting from the agitation and mixing of metallurgical systems with gas plumes. This model consists of transport equations for the variables of each phase which are then coupled through interaction parameters. The model is applied to three different systems namely, gas-stirred ladles, emulsification of slag-metal systems and mixing in shallow metal baths with multiple gas jets.     

Entropy generation minimization on electromagnetohydrodynamic radiative Casson nanofluid flow over a melting Riga plate

Minimizing entropy generation is a technique that helps improve the effectiveness of real processes by studying the associated irreversibility of system performance of nanofluid. This study examines the entropy generation analysis of electromagnetohydrodynamic radiative Casson flow induced by a stretching Riga plate in a non-Darcian porous medium under the influence of internal energy change, Arrhenius activation energy, chemical reaction, and melting heat transfer. The thermophysical features of the fluid are assumed constant in most of the literature. However, this current research bridges this gap by considering viscosity, conductivity, and diffusivity as temperature-dependent variables. Also, the exponential decaying Grinberg term is used as a resistive force in this investigation due to the electromagnetic properties of the Riga plate in the momentum conservation equation. Some suitable dimensionless variables are introduced to remodel the transport equations into unitless ones and then solved numerically by employing Galerkin Weighted Residual Method. Analyses reveal that the Casson parameter declines the fluid velocity, while the existence of the melting parameter has the opposite effect. Also, this article includes some future recommendations.     

Modelling of mechanical properties of five maize varieties at critical processing conditions in the production of fermented slurry-ogi

This research work was conducted to investigate the impact of critical processing conditions on the selected mechanical properties of maize in the production of fermented ogi slurry. Five varieties of maize (A4W, C3Y, D8W, B2Y, and E9W) were soaked at 28 ^ºC and average hot soaking at 65^ºC, respectively, for 96 h at 12-h interval. Selected mechanical properties were evaluated based on a 5 × 2 × 9 factorial design (varieties× soaking methods× soaking periods). Force (FB) and energy required to break (EB) maize grains decreased significantly (p < 0.05) up to the 12th hour. The EB reduced from 873.3 to 70.0 N mm and from 873.3 to 77.8 N mm for variety E9W at soaking conditions of 28^ºC and 65^ºC, respectively. Similar trends were observed for other maize varieties. Modulus of elasticity and resilience decreased significantly (p < 0.05) with increase in soaking period and moisture content. The EB to break maize grains was directly proportional to the product of Young’s modulus and area (E_m A^1.5), the FB and area (F_m A°^.5) and force required to break and geometric mean diameter (F D_g²) of maize grains with a high R² (0.9610.999). This study suggested that the duration of soaking between 12 and 24 h should be enough to significantly (p > 0.05) reduce the hardness, force, and energy required to break whole maize grains in the production of this fermented product and relevant for predicting minimum required energy for a large-scale operation.     

APPLICATION OF SPECTRAL METHODS TO THERMAL ANALYSIS OF NANOSCALE ELECTRONIC DEVICES

The transient thermal characteristics of nanoscale electronic devices operating at very high frequencies are studied by spectral methods. At such scales microscopic phenomena resulting from phonon collisions and phonon scattering become important. A device, consisting of an array of MOSFET transistors on silicon substrate, is considered as a test case. Thermal transport is represented by a reduced form of the Boltzmann transport equation: the thermal wave model or hyperbolic heat equation. The results indicate that spectral methods can be used effectively for the accurate prediction of the short-time transient effects in nanoscale devices. Such effects are amplified by a sharp increase in the operating voltage and the corresponding heat generation rate.     

Light and Electron Microscopy Studies of the Visible Diffusion Zone of Mild Steel Pack Cyanided in Processed Cassava Leaves

This study investigates the microstructure of the processed cassava leaves. Standard parts machined from low visible diffusion zone formed in low carbon steel pack cyanided using carbon steel were pack cyanided by high temperature in-situ diffusion of nascent carbon and nitrogen into austenite. Formation of a visible diffusion zone was confirmed after observation with a Reichert-Jung Polyval optical microscope coupled with Zeiss AxioCam ICc 1 camera. High magnification Scanning Electron Microscope （SEM） imaging of the visible diffusion zone was done with a CamScan Series 2 scanning electron microscope. The zone was found variable in depth as measured from a representative position. The structure of all samples consists of ferrite and pearlite as determined by optical and SEM examination. Resulting products were thus both tough and hard suitable for service environments requiring high resistance to both wear and impact failure.