In this paper, the problem of site characterization is treated as a task of function approximation of the large existing data from standard penetration tests (SPTs) in three-dimensional subsurface of Bangalore, India. More than 2,700 field SPT values (N) has been collected from 766 boreholes spread over an area of 220-km2 area in Bangalore, India. To get N corrected value (Nc), N values have been corrected for different parameters such as overburden stress, size of borehole, type of sampler, length of connected rod. In three-dimensional analysis, the function Nc = Nc(X,Y,Z), where X, Y, and Z are the coordinates of a point corresponds to Nc value, is to be approximated with which Nc value at any half-space point in Bangalore, India can be determined. An attempt has been made to develop artificial neural network (ANN) model using multilayer perceptrons that are trained with Levenberg-Marquardt back-propagation algorithm. Also, a geostatistical model based on ordinary kriging technique has been adopted. The knowledge of the semivariogram of the Nc values is used in the ordinary kriging method to predict the Nc values at any point in the subsurface of Bangalore, India where field measurements are not available. The results obtained show that ANN model is fairly accurate in predicting Nc values. In case of ordinary kriging, a new type of cross-validation analysis shows that it is a robust model for prediction of Nc values. A comparison between the ANN and geostatistical model demonstrates that the ANN model is superior to Geostatistical model in predicting Nc values in the subsurface of Bangalore, India. 相似文献
This article adopts least square support vector machine (LSSVM) and multivariate adaptive regression spline (MARS) for prediction of lateral load capacity (Q) of pile foundation. LSSVM is firmly based on the theory of statistical learning, uses regression technique. MARS is a nonparametric regression technique that models complex relationships. Diameter of pile (D), depth of pile embedment (L), eccentricity of load (e), and undrained shear strength of soil (Su) have been used as input parameters of LSSVM and MARS. Equations have been presented from the developed MARS and LSSVM. This study also presents a comparative study between the developed MARS and LSSVM. 相似文献
Guayule natural rubber (GNR) is an alternative resource of Hevea natural rubber (HNR) with 99.9% cis content in its 1,4-polyisoprene chemical backbone. In this study, compounds were formulated independently with four different reinforcing fillers such as carbon black (HAF), precipitated silica (VN3), fume silica (FUM) and nanofly ash (NFA) for the advancement of GNR based products. The cure characteristic, dynamic-mechanical performance and mechanical properties of GNR composite were studied with the reinforcing effect of different fillers on GNR. The cure characteristic results demonstrated that HAF and FUM silica filled compounds had more processing safety than VN3 and NFA filled compounds. Viscoelastic parameters of the vulcanizates were studied by dynamic mechanical analysis to estimate the glass transition characteristics and dynamic behavior. The higher storage modulus of FUM silica vulcanizate was an indication of superior filler reinforcing nature and improved rolling resistance than other filled systems. Additionally, HRTEM analysis also proved the better filler dispersion ability of FUM silica in GNR matrix. The mechanical properties were studied with a variation of each filler loading of 8, 16, and 32 phr in GNR vulcanizates. The tensile strength of each filled system increased with an increase of filler content from 8 to 32 phr. In comparison, FUM silica GNR vulcanizates exhibited better mechanical properties, therefore, it was considered as a better structure-performance composite than those of HAF, VN3 and NFA filled composites.
Poly(ethylene oxide) (PEO)/clay nanocomposites were prepared by a solution intercalation method using chloroform as a solvent. The nanocomposites were characterised by X-ray diffraction (XRD), differential scanning calorimetry (DSC), hot-stage polarized optical microscopy (POM), Fourier transform infrared spectroscopy (FT-IR), tensile analysis, dynamic mechanical analysis (DMA) characterisation techniques. Formation of nanocomposite was confirmed by X-ray diffraction (XRD) analysis. A decrease in PEO crystallinity in case of nanocomposite, was confirmed by a decrease in the heat of melting and spherulite size as indicated by DSC and POM studies, respectively. Improvement in tensile properties in all respect was observed for nanocomposites with optimum clay content (12.5 wt%). DMA studies indicate an increase in loss peak temperature and broadening of loss peak as a result of clay intercalation. 相似文献
A study of the effect of ash yield on the maximum thickness of the plastic layer (MTPL) of some coking coals (as measured by the Sapozhnikov plastometer) has revealed that with an increase in the former the latter in general decre?es. A rectilinear relation approximately exists between the ash percentage (dry basis) and log MTPL values of coals. For the samples studied, a multiple correlation incorporating the rank factor was found to be unnecessary. Higher Fe2O3 and SO3 contents from the coal were found to be associated with higher MTPL values. 相似文献
In this work we have evaluated molecular interactions in organically modified clay and polymer clay nanocomposite using a combination of experimental (photoacoustic FTIR, XRD) and computational (molecular dynamics (MD)) techniques. The FTIR data reveals hydrogen bond and ionic bond interaction between functional end groups of organic modifier and surface oxygen of interlayer clay sheet lying in the organically modified clay; and, the hydrogen bond formation between intercalated polymer and organic modifier and surface oxygen of clay sheet lying in the interlayer clay gallery in the polymer clay nanocomposite. In this work we report the nature of interactions between clay and polymer, clay and organic modifier in polymer-clay nanocomposites through experiments and molecular dynamics simulations. 相似文献
Stems of Jute (Corchorus capsularis L.) and sticks of Cane (Calamus rotang L.), plants of immense economic importance in the Indian subcontinent, were converted into carbonaceous perform (C-preform)
maintaining the circular cylindrical shapes in lengths of 0.02–0.05 m by controlled thermal processing. Plant material precursors
were characterized by analysis of elemental (C, H, N) and molecular (cellulose, hemicellulose, lignin) compositions, by determination
of Bulk Density (BD) and ash content and by optical microscopy and X-ray diffractometry (XRD). C-preforms were also characterized
by measurement of BD and by Scanning Electron Microscopy (SEM) and XRD. The C-preforms were further subjected to infiltration
with Si-melt (1823–1923 K) under vacuum. Spontaneous infiltration and reaction yielded composite ceramics preserving the morphology
of native Jute Stem (JS) and Cane Stick (CS) precursors on macro and micro scale. The materials were found to be duplex composites
with Si and β-SiC as crystalline phases. The end ceramics were characterized by measurement of BD, and also by SEM and by
XRD. Measured mean BD of the Si/SiC composites derived from JS and CS were 2190 Kg m−3 and 2250 Kg m−3. The respective volume fractions of large diameter (>100 μm) bulk pores were 0.134 and 0.204, in the composites derived from
JS and CS. Taking into account the measured volume fraction internal pores of 0.11 and 0.149, the volume fractions of SiC
were calculated to be 0.136 and 0.307 in the composites derived from JS and CS respectively, closely tallying with those calculated
from the C-preform bulk densities. The cellular Si/SiC ceramics derived from JS and CS having special morphologies with long
and large porous channels and oriented growth of constituent phases are likely to be suitable for devices such as high temperature
insulators, catalyst support structures for gas phase reactions at elevated temperatures, molten metal filters and others. 相似文献