The location and tracking of swallowed dental appliances: the role of radiology

BACKGROUND: The effects of beta 2 adrenergic agonists on chemoreceptors remain controversial. This study was designed to examine whether fenoterol, a beta 2 adrenergic agonist, increases the ventilatory responses to hypercapnia (HCVR) and hypoxia (HVR) in normal subjects. METHODS: HCVR was tested with a rebreathing method and HVR was examined with a progressive isocapnic hypoxic method in 11 normal subjects. Both HCVR and HVR were assessed by the slope of occlusion pressure (P0.1) or ventilation (VE) plotted against end tidal carbon dioxide pressure and arterial oxygen saturation, respectively. Respiratory muscle strength, spirometric values and lung volume were measured. After a single oral administration of 5 mg fenoterol or placebo HCVR and HVR were evaluated. RESULTS: Fenoterol treatment did not change the specific airway conductance or forced expiratory volume in one second. Respiratory muscle strength did not change. Fenoterol increased the slope of the HCVR of both P0.1 (from 0.251 (0.116) to 0.386 (0.206) kPa/kPa, average increase 71%) and VE (from 10.7 (3.4) to 15.1 (4.2) l/min/kPa, average increase 52%), and shifted the response curves to higher values. For the HVR fenoterol increased the slopes of both P0.1 and VE (from -4.06 (2.00) x 10(-3) to -7.99 (4.29) x 10(-3) kPa/%, an average increase of 83%, and from -0.221 (0.070) to -0.313 (0.112) l/min/%, a 44.5% increase, respectively), and shifted the response curves to higher values. CONCLUSION: Acute administration of fenoterol increases the ventilatory responses to both hypercapnia and hypoxia in normal subjects.     

Role of Macrophages and RhoA Pathway in Atherosclerosis

The development, progression, or stabilization of the atherosclerotic plaque depends on the pro-inflammatory and anti-inflammatory macrophages. The influx of the macrophages and the regulation of macrophage phenotype, inflammatory or anti-inflammatory, are controlled by the small GTPase RhoA and its downstream effectors. Therefore, macrophages and the components of the RhoA pathway are attractive targets for anti-atherosclerotic therapies, which would inhibit macrophage influx and inflammatory phenotype, maintain an anti-inflammatory environment, and promote tissue remodeling and repair. Here, we discuss the recent findings on the role of macrophages and RhoA pathway in the atherosclerotic plaque formation and resolution and the novel therapeutic approaches.     

Experimental and numerical study of a modified ASTM C633 adhesion test for strongly-bonded coatings

When coatings are strongly bonded to their substrates it is often difficult to measure the adhesion values. The proposed method, which is suggested naming “silver print test”, consists in covering the central part of the samples with a thin layer of silver paint, before coating. The process used for testing this new method was the Air plasma spraying (APS), and the materials used were alumina coatings on C35 steel substrates, previously pre-oxidized in CO₂. The silver painted area was composed of small grains that did not oxidize but that significantly sintered during the APS process. The silver layer reduced the surface where the coating was linked to the substrate, which allowed its debonding, using the classical adhesion test ASTM C633-13, while the direct use of this test (without silver painting) led to ruptures inside the glue used in this test. The numerical modelling, based on the finite element method with the ABAQUS software, provided results in good agreement with the experimental measurements. This concordance validated the used method and allowed accessing to the values of adherence when the experimental test ASTM C633-13 failed, because of ruptures in the glue. After standardization, the “silver print test” might be used for other kinds of deposition methods, such as PVD, CVD, PECVD.     

Effect of extraction methods on kinetic,chemical composition and antibacterial activities of Tunisian Thymus vulgaris. L. essential oil

The present study aims to compare two innovative extraction techniques: microwave-assisted hydrodistillation (MAHD) and solvent-free microwave extraction (SFME) through traditional extraction techniques: hydrodistillation (HD) and steam distillation (SD) for their efficiency in the extraction of the volatile compounds from Tunisian Thymus vulgaris leaves; the kinetic, yield, composition and antibacterial activities of the essential oil were assessed in vitro. Results show that the essential oils extracted by microwaves were quantitatively (yield) similar to those obtained through the conventional methods, but qualitatively, essential oils analysed by gas chromatography–mass spectrometry (GC–MS) presented 17, 11, 11 and 8 compounds obtained through SFME, MAHD, SD and HD, respectively, mostly consisting of carvacrol (89.24–41.17%), followed by γ-terpinene (11.37–1.37%) and para-cymene (27.95–2.05%). The essential oils were screened for antibacterial activity against 5 microorganisms. All essential oils obtained by studied extraction methods showed the same resistance against Gram (?) and Gram (+) bacteria. The SFME method gave the best results: rapid kinetic of extraction (30 min vs. 35 min for MAHD, 120 min for SD, and 180 min for HD), less energy saving and cleanest process.     

Coupled heat and moisture transfer in multi-layer building materials

A dynamic mathematical model for simulating the coupled heat and moisture migration through multi-layer porous building materials was proposed. Vapor content and temperature were chosen as the principal driving potentials. The discretization of the governing equations was done by the finite difference approach. A new experimental set-up was also developed in this study. The evolution of transient temperature and moisture distributions inside specimens were measured. The method for determining the temperature gradient coefficient was also presented. The moisture diffusion coefficient, temperature gradient coefficient, sorption–desorption isotherms were experimentally evaluated for some building materials (sandstone and lime-cement mortar). The model was validated by comparing with the experimental data with good agreement. Another advantage of the method lies in the fact that the required transport properties for predicting the non-isothermal moisture flow only contain the vapor diffusion coefficient and temperature gradient coefficient. They are relatively simple, and can be easily determined.     

Two-dimensional restoration of motion-degraded intensified CCD imagery

A Wiener filter-based deconvolution algorithm is developed to restore vibration-degraded video imagery from an intensified CCD camera. The method is based on the use of azimuth and elevation angular optical line-of-sight data recorded from external sensors to estimate a two-dimensional vibration-blur impulse response on a per frame basis. Flight conditions are reproduced in the laboratory by use of prerecorded in-flight vibration data. The performance of the algorithm varies from frame to frame, following the time-varying characteristics of the vibration-blur impulse response. However, real-time display of the restored video minimizes these effects because of eye integration, and near-full restoration of the original uncorrupted imagery is observed for both high-light- and low-light-level conditions with minimal amplification of noise.     

Bacterial-based additives for the production of artificial snow: What are the risks to human health?

For around two decades, artificial snow has been used by numerous winter sports resorts to ensure good snow cover at low altitude areas or more generally, to lengthen the skiing season. Biological additives derived from certain bacteria are regularly used to make artificial snow. However, the use of these additives has raised doubts concerning the potential impact on human health and the environment. In this context, the French health authorities have requested the French Agency for Environmental and Occupational Health Safety (Afsset) to assess the health risks resulting from the use of such additives. The health risk assessment was based on a review of the scientific literature, supplemented by professional consultations and expertise. Biological or chemical hazards from additives derived from the ice nucleation active bacterium Pseudomonas syringae were characterised. Potential health hazards to humans were considered in terms of infectious, toxic and allergenic capacities with respect to human populations liable to be exposed and the means of possible exposure. Taking into account these data, a qualitative risk assessment was carried out, according to four exposure scenarios, involving the different populations exposed, and the conditions and routes of exposure. It was concluded that certain health risks can exist for specific categories of professional workers (mainly snowmakers during additive mixing and dilution tank cleaning steps, with risks estimated to be negligible to low if workers comply with safety precautions). P. syringae does not present any pathogenic capacity to humans and that the level of its endotoxins found in artificial snow do not represent a danger beyond that of exposure to P. syringae endotoxins naturally present in snow. However, the risk of possible allergy in some particularly sensitive individuals cannot be excluded. Another important conclusion of this study concerns use of poor microbiological water quality to make artificial snow.     

Evolution of Thermophysical Characteristics in Tin Oxide: From Pressed Powder Compact to Fired Porous Body

The thermal response of a ceramic body during firing will be controlled by its thermophysical characteristics. Laser flash measurements have been used to investigate the thermal conductivity of pressed powder compacts of pure tin oxide as a function of temperature. After an initial decrease up to 150°C attributed to removal of surface species, the thermal conductivity increases progressively with thermal treatment up to 1000°C. Because there is almost no variation in the pore volume fraction, the behavior is explained by grain boundary formation and neck growth, which increase the contact area between particles. Supporting evidence is given by an increase in mechanical strength. Finally, thermal treatment above 1000°C increases the thermal conductivity due to a reduction in the number of grain boundaries per unit length of heat path.     

A Strategy for Controlling Groundwater Depletion in the Sa'dah Plain,Yemen

Over-exploitation of the groundwater resources is the major problem leading to groundwater depletion in the Sa'dah Plain, one of the major semi-arid highland basins of Yemen. Groundwater-irrigated agriculture is the chief economic activity in the Plain. Consequently, depletion places socioeconomic development in jeopardy. Owing to the lack of institutional arrangements and management instruments, government intervention is not likely to alleviate the crisis. One non-governmental approach that takes advantage of the existing local sociopolitical structure and customary law would be to adopt an annual abstraction quota. Approaching the crisis at a grass-roots level and relying on the conformity of the local citizens with customary law are the main characteristics of this strategy, the optimum objective of which is sustainable utilization of water resources.     

Crack propagation modeling on the interfaces of thermal barrier coating system with different thickness of the oxide layer and different interface morphologies

A finite element model (FEM) is developed to simulate the crack development in a typical plasma sprayed thermal barrier coatings system in consequence of the stresses induced by thermal cycling, the growth of the oxide layer and different interface morphologies. The thermo-mechanical model is designed to takes into account a non-homogenous temperature distribution and the effects of the residual stress generated during coating process.