Low-temperature post-treatment of anaerobically treated-sewage in anaerobic filter with cationic-polymer addition.

The post-treatment of domestic sewage pretreated in a 6 m3 UASB was investigated in two high-rate anaerobic filter (AF) reactors operated in parallel. The difference between the two AF reactors was only the addition of cationic polymer to the second reactor (AF + P). The reactors were operated at low temperatures, ranged between 13 and 20 degrees C. The media in each AF reactor consisted of vertical sheets of reticulated-polyurethane foam (RPF) with knobs. The results demonstrated that the AF + P reactor (HRT = 3 h) with cationic polymer addition (2 mg/L) was an efficient system for post-treatment. The removal efficiencies for total, suspended, colloidal and dissolved COD were, respectively, 41, 86 and 76 and 12% in the AF + P reactor and they were, respectively, 80, 97, 77 and 66% in the UASB + (AF + P) system. The removal of total, suspended and colloidal COD in the UASB + (AF + P) system were significantly higher than those achieved in the UASB + AF system. As hardly any nutrient was removed in the UASB + (AF + P) system, the effluent after pathogen removal is a valuable product for irrigation and fertilisation to close the water and nutrients cycle.     

Design and development of a multichannel potentiometer for monitoring an electrode array and its application in flow analysis

A versatile potentiometer that works with electrode arrays in flow injection and/or monosegmented flow systems is described. The potentiometer is controlled by a microcomputer that allows individual, sequential multiplexed or random accesses to eight electrodes while employing only one reference electrode. The instrument was demonstrated by monitoring an array of seven flow-through ion-selective electrodes for Ag(+) and for three electrodes for Cl(-), Ca(2+) and K(+). The figures of merit of the individual and multiplexed (summed) readings of the electrode array were compared. The absolute standard deviation of the measurements made by summing the potential of two or more electrodes was maintained constant, thus improving the precision of the measurements. This result shows that an attempt to combine the signals of the electrodes to produce a more intense signal in the Hadamard strategy is feasible and accompanied by a proportional improvement in the precision of individual measurements. The preliminary tests suggest that the system can allow for 270 determinations per hour, with a linear range from 1.0 x 10(-2) to 1.0 x 10(-4) mol l(-1) for the three di inverted exclamation markerent analytes. Detection limits were estimated as 3.1 x 10(-5), 3.0 x 10(-6) and 1.0 x 10(-5) mol l(-1) for Cl(-), Ca(2+) and K(+), respectively.     

Electrocatalysis of oxygen reduction on a carbon supported platinum-vanadium alloy in polymer electrolyte fuel cells

The electrocatalysis of the oxygen reduction reaction (ORR) on carbon supported Pt:V 1:1 catalyst in polymer electrolyte fuel cells (PEFC) was investigated. At an oxygen pressure of 1 atm results indicate a lower electrocatalytic activity for the ORR in the presence of vanadium. However, at an O₂ pressure ≥2 atm an enhanced electrocatalytic property of PtV/C compared with Pt/C is revealed. This result indicates the occurrence of a different electrocatalytic mechanism for the ORR on Pt/C and PtV/C. An increase of mass transport overpotentials is observed for the PtV/C catalyst, and this was related to the presence of vanadium oxide. Indeed, XRD analysis revealed that only about 30% of V present in the catalyst is alloyed with Pt, forming a face centred cubic (fcc) Pt₃V solid solution. A thermal treatment at 850 °C under reducing atmosphere leads to the formation of an ordered fcc Pt₂V phase. After this, the ORR activity of PtV/C at O₂ pressure 1 atm is higher than that of Pt/C.     

Retrofit of RC hollow piers with CFRP sheets

Hollow bridge piers, particularly those built before the seventies, often have insufficient shear capacity due to inadequate transverse reinforcement details. Therefore, special attention must be given to this very important aspect when reinforced concrete (RC) piers with hollow sections are analysed and retrofitted. This paper covers the experimental analysis of retrofit solutions using CFRP sheets along the piers’ entire height to prevent shear failure. Experimental cyclic tests were carried out to evaluate the shear retrofit strategy efficiency on a set of RC piers with square hollow sections. This work also covers the study of design procedures for CFRP shear retrofitting and the evaluation of the associated ductility capacity improvement. The various transverse reinforcement detailing scenarios were assessed to determine their shear-failure prevention efficiency. The corresponding cyclic response behavior was also evaluated. The most relevant experimental information is presented in the paper, such as the evolution of the outer damage pattern. Finally, shear retrofit solutions, with a 40% increase over the maximum flexural force, show that this strategy is adequate to allow satisfactory ductility behavior.     

Nonwoven Ni–NiO/carbon fibers for electrochemical water oxidation

The development of technologically efficient anodes for water oxidation is crucial to improve hydrogen production via water splitting. Electrodes based on metallic active sites dispersed in carbon matrices have been shown to be an attractive way to attain this goal. However, challenges remain to prevent catalyst agglomeration that otherwise can result in a decrease of performance over time.In this work, we report an alternative and efficient method to produce nickel-nickel oxide nanoparticles-embedded in carbon nanofibers (Ni–NiO/C), by the solution blow spinning (SBS) process. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses show the carbon nanofibrillar matrix as a robust support, with well-dispersed nickel nanoparticles on the surface. The responses of the linear scanning voltammetry, cyclic voltammetry and electrochemical impedance spectroscopy demonstrate how a small fraction of nickel on the fiber surface (≈1.2–5.3%) is enough to promote substantial improvement in performance (η = 278 and 309 mV vs RHE for 10 mA cm^?2) and a significant turnover frequency (TOF) values of 1.38 (η = 278) and 1.30 s^?1 (η = 309). These promising results are correlated with a large amount of Ni³⁺ present on the fiber surfaces, as identified by X-ray Photoelectron Spectroscopy (XPS). This work provides a low-cost and rapid preparation technique that can be extended for the manufacture of a wide variety of electrodes based on metals supported on carbon nanofibers.     

Preconditioning approaches related to canonical correlation by use of cyclic form

There are many situations in engineering where we need to calculate the eigensystem of a matrix A which is given as a product of matrices, that is, A = A ₁ A ₂···A _p . Since, usually, we first perform the multiplication of the factors, the matrix A often becomes very ill-conditioned. Actually this happens even when A is a symmetric matrix, which will be our concern here. In this article we introduce a new approach to calculate the eigensystem of A without performing the indicated multiplication, or performing only partially the multiplication of the factors.     

Multiple Land Regimes: Rethinking Land Governance in Maputo’s Peri-urban Spaces

Africa’s increasing levels of urbanisation have significant implications for urban land. Growing populations imply that there is increasing pressure on cities to provide economic opportunities, housing, infrastructure and social services to existing and incoming urban dwellers. These activities take place on urban land, and much of the new growth occurs outside of the state regulatory and legal frameworks. Using survey data collected in Maputo’s peri-urban areas of Luis Cabral and Hulene B, this paper explores how ordinary urban dwellers access, hold, transact and manage land. These findings suggest that a land market that is technically outside of the legal system exists. Notwithstanding its illegality, these land practices are organised, comprising sophisticated local land management and regulatory systems. The low incidence of land conflicts in both neighbourhoods shows that these governance practices are relatively functional. Local practices are characterised by a complex web of social roleplayers, including family members, neighbours, local leadership structures and state officials all of whom lend credibility and legitimacy to the existence of a local land market. These findings challenge conventional understanding of formal and informal markets. It is argued that these socially embedded land markets indicate how urban territory is segmented and managed, and their existence also transforms the way we conceptualise formality and informality in African cities. This situation shows how informal urban economies are co-produced by state and non-state regulatory systems. These hybrid economies have implications for how we understand governance, markets and the role of the state in our cities.     

The effect of cocoa fermentation and weak organic acids on growth and ochratoxin A production by Aspergillus species

The acidic characteristics of cocoa beans have influence on flavor development in chocolate. Cocoa cotyledons are not naturally acidic, the acidity comes from organic acids produced by the fermentative microorganisms which grow during the processing of cocoa. Different concentrations of these metabolites can be produced according to the fermentation practices adopted in the farms, which could affect the growth and ochratoxin A production by fungi. This work presents two independent experiments carried out to investigate the effect of some fermentation practices on ochratoxin A production by Aspergillus carbonarius in cocoa, and the effect of weak organic acids such as acetic, lactic and citric at different pH values on growth and ochratoxin A production by A. carbonarius and Aspergillus niger in culture media. A statistical difference (ρ<0.05) in the ochratoxin A level in the cured cocoa beans was observed in some fermentation practices adopted. The laboratorial studies demonstrate the influence of organic acids on fungal growth and ochratoxin A production, with differences according to the media pH and the organic acid present. Acetic acid was the most inhibitory acid against A. carbonarius and A. niger. From the point of view of food safety, considering the amount of ochratoxin A produced, fermentation practices should be conducted towards the enhancement of acetic acid, although lactic and citric acids also have an important role in lowering the pH to improve the toxicity of acetic acid.     

An undergraduate system-on-chip (SoC) course for computer engineering students

The authors have developed a senior-level undergraduate system-on-chip (SoC) course at San Jose State University, San Jose, CA, that emphasizes SoC design methods and hardware-software codesign techniques. The course uses a "real world" design project as the teaching vehicle and implements an SoC platform to control a five-axis robotic arm using Altera's state-of-the-art Excalibur chip. The Excalibur chip contains both ARM Corporation's embedded processor and a programmable logic device (PLD) array. The course goes through a complete hardware-software codesign flow from implementing custom hardware devices on a PLD to developing an embedded algorithm in a state-of-the-art design environment for a complete SoC solution. Students learn the Quartus II design environment by examining the sample design files in Altera's EXPA1 development kit and following the step-by-step instructions toward creating a simple embedded application. After this familiarization process, students define the architectural specifications of a memory-mapped servo controller, implement it in the Excalibur's PLD array, and interface this device with the ARM processor's internal bus to control each robotic arm servo. Functional regression tests and post-synthesis timing verification steps are applied to the servo controller following the implementation phase. Subsequently, students integrate the servo controller with the rest of the system and perform board-level functional verification tests to observe whether the robotic arm can move an object from a source to a destination point accurately. Students also develop an embedded algorithm, which translates user inputs in Cartesian coordinates into robotic arm movements in spherical coordinates during laboratory sessions.