EC Analysis of Multi-Antenna System over 5G and Beyond Networks and its Application to IRS-Assisted Wireless Systems

Wireless Personal Communications - Recently, the theory of effective rate has attracted much attention, since it can take the delay aspect into account when performing channel capacity analysis. In...     

A Survey on Advanced Multiple Access Techniques for 5G and Beyond Wireless Communications

Wireless Personal Communications - This paper summarizes the ongoing research initiatives based on the advanced multiple access techniques towards the fifth generation (5G) wireless communication...     

Domain Adaptation for POS Tagging with Contrastive Monotonic Chunk-wise Attention

Neural Processing Letters - Part of Speech (POS) tagging is a sequential labelling task and one of the core applications of Natural Language Processing. It has been a challenging problem for the...     

Impact of Mole Fractions due to Work Function Variability (WFV) of Metal Gate on Electrical Parameters in Strained SOI-FinFET

In the recent sub-20 nm technology node, the process variability issues have become a major problem for scaling of MOS devices. We present a design for a strained Si/SiGe FinFET on an insulator using a 3D TCAD simulator. The impact of metal gate work function variability (WFV) on electrical parameters is studied. Such impact of WFV for different mole fractions (x) of the SiGe layer in a strained SOI-FinFET with varying grain size is presented. The results show that as the mole fraction is increased, the variability in threshold voltage (σVT) and off current (σIoff) is decreased; while, the variability of on-current (σIon) is increased. A notable observation is the distribution of electrical parameters approaches a normal distribution for smaller grain sizes.     

An adaptive descent method for non-linear viscoplasticity

A forming model based on a viscoplastic flow formulation is derived which includes the effects of small elastic strains. A significant feature of the formulation is its reliance on the dominant inelastic material characteristics in the formation of the stiffness matrix for large strain problems. The resultant non-linear system of equations is solved by an adaptive descent method which combines the rapid convergence of Newton's method near the solution with the robustness of a method of successive approximations. The use of the adaptive descent method effectively extends the viscoplastic flow formulations into the nearly rate-insensitive range of behaviours exhibited, for example, by metals at low temperature, where slow convergence of the non-linear solution algorithm has traditionally hampered their use.     

Crystallization of amorphous Ni60 Nb40−x Cr x alloys

Crystallization behaviour of amorphous Ni₆₀ Nb_40-x Cr _x (x = 0, 5, 10 and 13 at%) alloys was studied by differential Scanning calorimetry and X-ray diffraction measurements. It is shown that the addition of chromium reduces the crystallization temperature, stages of crystallization and activation energies associated with the crystallization sages of the Ni₆₀Nb₄₀ glass. Crystallization of the Ni₆₀Nb₄₀ glass occurred in three stages; in the initial stage a metastable M-phase formed in the amorphous matrix as reported earlier [1] . However, contrary to earlier observation [1], M -phase was not very stable and transformed together with some amorphous phase to the equilibrium Ni₃Nb phase in the second stage of crystallization. In the third stage, the remaining amorphous matrix transformed to the equilibrium NiNb phase. On addition of chromium the formation/stability of the M-phase was found to be suppressed and equilibrium NbCr₂ phase precipitated preferentially in the first stage. The second stage, corresponding to the formation of Ni₃Nb phase, remained almost unaltered. The third stage corresponding to the crystallization of NiNb phase disappeared completely at 13 at% Cr. In the fully crystallized samples the proportion of the NiNb phase decreased and that of NbCr₂ phase increased continuously with chromium concentration.     

INFLUENCE OF DESIGN AND OPERATIONAL PARAMETERS ON YIELD OF FULLERENES

Fullerene production by arc-discharge method using graphite electrodes has been studied with respect to influence of different design and operational parameters on fullerene yield in a constant arc fullerene reactor. The design parameters like reactor length, diameter, heat transfer area and operational parameters like voltage, current, pressure, coolant flow rate, graphite evaporation rate and electrode diameter etc. have been experimentally studied in detail to establish a relationship between these parameters and fullerene yield. All the parameters affecting the yield have been correlated by dimensional analysis and an equation to calculate the fullerene yield is derived. It was observed experimentally as well as by dimensional analysis that many favorable parameters for getting good yield are linked with other parameters which also get changed if the favorable parameters are changed and thus it is difficult to make a substantial change in the yield of fullerenes.  The relationship established between the yield and parameters is however useful in optimising fullerene yield in a reactor and also helpful in designing a futuristic fullerene reactor of improved yield and productivity. The fullerene yield from different designs of reactors is obtained in the range of 4% to 20%.     

Cut off frequency and transit time analysis of lightly doped drain (LDD) MOSFETs

Analytical model for the transconductance, cut off frequency, transit time and fringing capacitance of LDD MOSFETs is presented with a simple approach. The analysis is carried out considering the LDD device as a conventional MOSFET with a series resistance [Z.-H. Liu et al., Threshold voltage model for submicrometer MOSFETs. IEEE Trans Electron Devices 1993; ED-40: 86–94] and a simple closed form expressions for cut off frequency and transit time is obtained. The total gate capacitance, i.e. the geometric and fringing capacitance, is calculated for both LDD and non-LDD devices and lower fringing capacitance is reported in LDD devices. Lower cut-off frequencies and higher transit time are reported in LDD devices for the same channel length.     

Modification of mechanical properties of Kevlar fibre by polymer infiltration

While high-performance organic fibres such as poly (para phenylene benzobisthiazole) and Kevlar possess excellent mechanical properties under axial tension, their strength under compression is generally poor. This study focuses on a polymer infiltration approach to modify the mechanical properties of the Kevlar 49 fibre in tension as well as compression, in which various polymeric resins are infiltrated in an opened fibrillar network of Kevlar single filaments. Opening was achieved using concentrated sulfuric acid, which resulted in a strength loss at high acid concentrations. However, compared to the acid-treated fibre, both the tensile strength and strain-to-failure of the fibres were found to increase after infiltration with epoxy resins and bismaleimide polymers. Polymer infiltration also resulted in a significant improvement in the compressive strength of the Kevlar fibre, with the bismaleimide performing better than the epoxy resins. Plasma modification using ammonia was also used to enhance interfibrillar adhesion by incorporating reactive amine groups on the fibril surface