Effect of dynamic strain ageing on the tensile properties of a modified 9Cr–1Mo steel

Tensile testing of a modified 9Cr–1Mo steel in two microstructural conditions (710T– normalized at 1100°C, tempered at 710°C, and 550T – normalized at 1100°C tempered at 550°C) in the temperature range 25–450°C, under strain rates of 2.3×10-5–2.3×10-3s-1, exhibited serrated flow curves, with serrations appearing almost at the onset of deformation and disappearing before ultimate strengths were attained. The serrated flow curves (characteristics of dynamic strain ageing) were accompanied by increased ultimate strengths, loss of ductility and negative strain-rate sensitivity, relative to the ambient temperature properties. However, the increase in ultimate strength and the reduction in ductility were much larger for 710T specimens, as compared to 550T ones. In the dynamic strain ageing regime, the work-hardenability of 710T specimens increased rapidly while that of 550T specimens remained practically unaffected. Based on the microstructural consideration and the observed activation energy of 45 kJ mol-1, it is proposed that serrations are initiated by a nitrogen atmosphere formation on the waiting dislocations by a pipe diffusion mechanism, and they disappear by diffusion to the precipitate sinks during deformation. Because the fine alloy carbide precipitates in 550T specimens are more effective sinks than those of 710T ones, they can cause much faster depletion of the atmosphere, resulting in a much smaller effect of dynamic strain ageing on the tensile properties of 550T specimens.     

SHELF-LIFE MODELING OF SWEETENED CONDENSED MILK BASED ON KINETICS OF MAILLARD BROWNING

Nonenzymatic browning and related changes were monitored in commercial sweetened condensed milk stored at 7, 15, 30, 45 and 55C. Darkening of the color measured in terms of absorbance (100 - reflectance percent) followed zero-order kinetics, the apparent activation energy (E_a) being 45.2 kJ/mol at 7–30C and 139.9 kJ/mol at > 30–55C. Hydroxy-methyl-furfural (HMF) showed a first-order increase, the associated E_a values being smaller than those for absorbance. The pH exhibited a linear decline after a small initial rise at 30C and below. As browning progressed, the coffee whitening ability of the product decreased along zero-order kinetics. The Q₁₀ values for these variables ranged from 1.21 to 1.84 for temperatures up to 30C and were nearly 2–3 times higher above 30C. The sensory color score was negatively correlated with absorbance. The linear regression of color score on absorbance and the temperature dependence of the latter as expressed by Arrhenius relationship were combined into a mathematical model which could be useful in predicting the product's shelf-life.     

Effects of Gamma Irradiation on Proteins and Fatty Acids of Soybean

Two hundred grams of soybean seeds (moisture contents of 7.4, 15.3, 22.5, and 30.5%) were irradiated at dose levels of 0, 1, 5, 10, 20, 40, 60, 80 and 100 KGy using Cobalt-60 source. Radiation dose of 100 KGy caused a decrease in the percentage of nitrogen solubility from 80.3 to 67.2, 80.3 to 57.8, and 68.1 to 48.8 when deionized H₂O, 0.6M NaCl, and 0.2M Cacl₂ were used as solvents, respectively. Inhibition of 71% of lipoxygenase activities, 25.4% trypsin inhibitor activities, and 16.7% chymotrypsin inhibitor activities were found when the soybean seeds were irradiated at 100 KGy.     

RESIDENCE TIME DISTRIBUTION (RTD) AND GOODNESS OF MIXING (GM) DURING CO2-INJECTION IN TWIN-SCREW EXTRUSION PART II: GM STUDIES

Experimental residence-time distribution (RTD) characteristics of an extrusion process may be used to estimate the extent of mixing experienced in the extruder. Using earlier theories of laminar mixing and striation thickness reduction, a new approach to estimate efficacy of mixing of two phases in the mixing zone of the extruder is proposed. Predicting the time required to achieve complete mixing and comparing it with the minimum time (plug flow time) that the extrudate spends in the mixing zone gives a ratio that can be used to evaluate the adequacy of extruder operating conditions for good mixing of gas/fluid injection and extrudate. Twin-screw extrusion of cornmeal with carbon dioxide injection were used to investigate the effect of CO₂ injection pressure and extruder screw speeds on mixing. Lower CO₂ injection pressures (25 bars) and lower screw speeds (150 rpm) were theoretically shown to enhance mixing. Scanning electron micrographs (SEMs) of experimental samples taken showed smaller and more uniform cell structures for those conditions which were predicted to favor better mixing.     

Some new distance measures for type-2 fuzzy sets and distance measure based ranking for group decision making problems

In this paper, we propose some distance measures between type-2 fuzzy sets, and also a new family of utmost distance measures are presented. Several properties of differ- ent proposed distance measures have been introduced. Also, we have introduced a new ranking method for the ordering of type-2 fuzzy sets based on the proposed distance measure. The proposed ranking method satisfies the reasonable prop- erties for the ordering of fuzzy quantities. Some properties such as robustness, order relation have been presented. Lim- itations of existing ranking methods have been studied. Fur- ther for practical use, a new method for selecting the best alternative, for group decision making problems is proposed. This method is illustrated with a numerical example.     

Security Driven Scheduling Model for Computational Grid Using NSGA-II

Number of software applications demands various levels of security at the time of scheduling in Computational Grid. Grid may offer these securities but may result in the performance degradation due to overhead in offering the desired security. Scheduling performance in a Grid is affected by the heterogeneities of security and computational power of resources. Customized Genetic Algorithms have been effectively used for solving complex optimization problems (NP Hard) and various heuristics have been suggested for solving Multi-objective optimization problems. In this paper a security driven, elitist non-dominated sorting genetic algorithm, Optimal Security with Optimal Overhead Scheduling (OSO₂S), based on NSGA-II, is proposed. The model considers dual objectives of minimizing the security overhead and maximizing the total security achieved. Simulation results exhibit that the proposed algorithm delivers improved makespan and lesser security overhead in comparison to other such algorithms viz. MinMin, MaxMin, SPMinMin, SPMaxMin and SDSG.     

Comprehensive study of RF analysis of G/GO-based NEMS shunt switch

Microsystem Technologies - High isolation and low insertion loss are the key design parameters for the NEMS switch at high frequency. The comprehensive study of radio frequency (RF) performance...     

Understanding the effect of <Emphasis Type="Italic">n</Emphasis>-type and <Emphasis Type="Italic">p</Emphasis>-type doping in the channel of graphene nanoribbon transistor

In this paper, device performance of graphene nanoribbon field effect transistor (GNRFET) with different doping concentrations in different parts of the channel is reported. The study is performed by using atomistic simulations based on self-consistent solution of Schrodinger’s and Poisson’s equation within the non-equilibrium Green’s function formalism. The transfer and output characteristics suggest that device performance with n-type doping in the channel is better with smaller supply voltage compared to higher supply voltage. On increasing the n-type doping concentration, we obtained better on-current and output characteristics in comparison with undoped and p-type doped channel GNRFET. Further, we introduced step-doping profile in the graphene nanoribbon (GNR) channel and found that the device gives better on-current and good saturation condition when compared to undoped or uniformly-doped channel.