Statistical characterization of urban spatial radio channels

We present a statistical analysis of wideband three-dimensional channel measurements at base station locations in an urban environment. Plots of the received energy over azimuth, elevation, and delay planes suggest that the incident waves group to clusters in most measured transmitter positions. A super-resolution algorithm (Unitary ESPRIT) allows one to resolve individual multipath components in such clusters and hence enables a detailed statistical analysis of the propagation properties. The origins of clusters-sometimes even individual multipath components-such as street apertures, large buildings, roof edges, or building corners can be localized on the city map. Street guided propagation dominates most of the scenarios (78%-97% of the total received power), while quasi-line-of-sight over-the-rooftop components are weak(3%-13% of the total received power). For this measurement campaign, in 90% of the cases, 75% of the total received power is concentrated in the two strongest clusters, but only 55% in the strongest one. Our analysis yields an exponential decay of power with 8.9 dB/μs, and a standard deviation of the log-normally distributed deviations from the exponential of 9.0 dB. The power of cross-polarized components is 8 dB below copolarized ones on average (vertical transmission)     

A novel secure solution of using mixed reality in data transmission for bowel and jaw surgical telepresence: enhanced rivest cipher RC6 block cipher

Security threats are crucial challenges that deter Mixed reality (MR) communication in medical telepresence. This research aims to improve the security by reducing the chances of types of various attacks occurring during the real-time data transmission in surgical telepresence as well as reduce the time of the cryptographic algorithm and keep the quality of the media used. The proposed model consists of an enhanced RC6 algorithm in combination. Dynamic keys are generated from the RC6 algorithm mixed with RC4 to create dynamic S-box and permutation table, preventing various known attacks during the real-time data transmission. For every next session, a new key is created, avoiding possible reuse of the same key from the attacker. The results obtained from our proposed system are showing better performance compared to the state of art. The resistance to the tested attacks is measured throughout the entropy, Pick to Signal Noise Ratio (PSNR) is decreased for the encrypted image than the state of art, structural similarity index (SSIM) closer to zero. The execution time of the algorithm is decreased for an average of 20%. The proposed system is focusing on preventing the brute force attack occurred during the surgical telepresence data transmission. The paper proposes a framework that enhances the security related to data transmission during surgeries with acceptable performance.

     

Neural networks in process life cycle profit modelling

Changes in operational environment of the process industry such as decreasing selling prices, increased competition between companies and new legislation, set requirements for performance and effectiveness of the industrial production lines and processes. For the basis of this study, a life cycle profit (LCP) model of a pulp process was constructed using different kind of process information including chemical consumptions and production levels of material and energy flows in unit processes. However, all the information needed in the creation of relevant LCP model was not directly provided by information systems of the plant. In this study, neural networks was used to model pulp bleaching process and fill out missing information and furthermore to create estimators for the alkaline chemical consumption. A data-based modelling approach was applied using an example, where factors affecting the sodium hydroxide consumption in the bleaching stage were solved. The results showed that raw process data can be refined into new valuable information using computational methods and moreover to improve the accuracy of life cycle profit models.     

Wet Chemical Treatment and Mg Doping of p-InP Surfaces for Ohmic Low-Resistive Metal Contacts

Manufacturing a low-resistive Ohmic metal contact on p-type InP crystals for various applications is a challenge because of the Fermi-level pinning via surface defects and the diffusion of p-type doping atoms in InP. Development of wet-chemistry treatments and nanoscale control of p-doping for InP surfaces is crucial for decreasing the device resistivity losses and durability problems. Herein, a proper combination of HCl-based solution immersion, which directly provides an unusual wet chemical-induced InP(100)c(2 × 2) atomic structure, and low-temperature Mg-surface doping of the cleaned InP before Ni-film deposition is demonstrated to decrease the contact resistivity of Ni/p-InP by the factor of 10 approximately as compared to the lowest reference value without Mg. Deposition of the Mg intermediate layer on p-InP and postheating of Mg/p-InP at 350 °C, both performed in ultrahigh-vacuum (UHV) chamber, lead to intermixing of Mg and InP elements according to X-ray photoelectron spectroscopy. Introducing a small oxygen gas background (O₂ ≈ 10⁻⁶ mbar) in UHV chamber during the postheating of Mg/p-InP enhances the indium outdiffusion and provides the lowest contact resistivity. Quantum mechanical simulations indicate that the presence of InP native oxide or/and metal indium alloy at the interface increases In diffusion.     

Numerical optimization of conduction cooled current leads for low current applications

The basic design principles of current leads for superconducting magnets are well established but HTS materials and conduction cooled systems call for new numerical methods. In this paper the design of current leads was formulated as an optimization problem. Both time integration and finite differencing were examined as possible ways to compute the temperature distribution inside the leads. Three examples about optimization of conduction cooled as well as gas cooled systems are presented. First, the design of tubular normal conducting gas cooled current leads was studied. Second, normal conducting leads cooled with a two-stage cryocooler were examined. Third, the optimization was applied to current leads consisting of HTS tapes at the low temperature end of a normal conducting bar. The study took into account the magnetic field and temperature dependent voltage-current characteristics of the anisotropic Bi-2223 material. The results are compared with traditional analytical ones and the numerical optimization is shown to be an efficient design tool for both normal conducting and HTS current leads.     

化学分离法分析大型纸浆发电厂废渣中生物质底灰和飞灰成分(英文)

采用三步分离法,其中第一步用水,第二步用乙酸铵,第三步用盐酸,提取纸浆发电厂生物质飞灰和底灰的组分,以评估这些残渣的浸出行为。除了Mo、S、Na以及那些浓度低于检测范围的元素外,在这两种灰份中,对于其他元素这三种浸出剂的浸出能力从弱到强的顺序为:水、乙酸铵和盐酸。采用三步分离法处理的废渣中元素浓度比前期用BCR连续提取法得到的低。     

Supporting driver headway choice: The effects of discrete headway feedback when following headway instructions

With specific headway instructions drivers are not able to attain the exact headways as instructed. In this study, the effects of discrete headway feedback (and the direction of headway adjustment) on headway accuracy for drivers carrying out time headway instructions were assessed experimentally. Two groups of each 10 participants (one receiving headway feedback; one control) carried out headway instructions in a driving simulator; increasing and decreasing their headway to a target headway of 2 s at speeds of 50, 80, and 100 km/h. The difference between the instructed and chosen headway was a measure for headway accuracy. The feedback group heard a sound signal at the moment that they crossed the distance of the instructed headway. Unsupported participants showed no significant difference in headway accuracy when increasing or decreasing headways. Discrete headway feedback had varying effects on headway choice accuracy. When participants decreased their headway, feedback led to higher accuracy. When increasing their headway, feedback led to a lower accuracy, compared to no headway feedback. Support did not affect driver's performance in maintaining the chosen headway. The present results suggest that (a) in its current form discrete headway feedback is not sufficient to improve the overall accuracy of chosen headways when carrying out headway instructions; (b) the effect of discrete headway feedback depends on the direction of headway adjustment.     

Effects of Ospemifene on Drug Metabolism Mediated by Cytochrome P450 Enzymes in Humans in Vitro and in Vivo

The objective of these investigations was to determine the possible effects of the novel selective estrogen receptor modulator, ospemifene, on cytochrome P450 (CYP)-mediated drug metabolism. Ospemifene underwent testing for possible effects on CYP enzyme activity in human liver microsomes and in isolated human hepatocytes. Based on the results obtained in vitro, three Phase 1 crossover pharmacokinetic studies were conducted in healthy postmenopausal women to assess the in vivo effects of ospemifene on CYP-mediated drug metabolism. Ospemifene and its main metabolites 4-hydroxyospemifene and 4′-hydroxyospemifene weakly inhibited a number of CYPs (CYP2B6, CYP2C9, CYP2C19, CYP2C8, and CYP2D6) in vitro. However, only CYP2C9 activity was inhibited by 4-hydroxyospemifene at clinically relevant concentrations. Induction of CYPs by ospemifene in cultured human hepatocytes was 2.4-fold or less. The in vivo studies showed that ospemifene did not have significant effects on the areas under the plasma concentration-time curves of the tested CYP substrates warfarin (CYP2C9), bupropion (CYP2B6) and omeprazole (CYP2C19), demonstrating that pretreatment with ospemifene did not alter their metabolism. Therefore, the risk that ospemifene will affect the pharmacokinetics of drugs that are substrates for CYP enzymes is low.