Application of EPR-MOGA in computing the liquefaction-induced settlement of a building subjected to seismic shake

Accurate prediction of the liquefaction-induced settlement (\({S}_{\mathrm{lc}}\)) is an essential requirement for a good design of buildings resting on liquefiable ground and subjected to seismic shake. However, prediction of the \({S}_{\mathrm{lc}}\) is not straightforward process and it requires advanced soil models and calibrated soil parameters that are not readily available for designers/practitioners. In addition, the available empirical models to estimate the \({S}_{\mathrm{lc}}\) have been developed using either classical regression analysis or multivariate adaptive regression splines and such techniques produce complicated models. Also, these empirical models have been developed utilizing results of numerical modelling. To overcome these limitations, novel model has been developed in this paper utilizing robust regression analysis driven by artificial intelligence called the evolutionary polynomial regression analysis. The new model has been developed using centrifuge results (real laboratory measurements) and can be easily used to accurately estimate the liquefaction induced settlement. The developed model scored a mean absolute error, root mean square error, mean, standard deviation of the predicted to measured values, coefficient of determination, \(a20 - \mathrm{index}\), and EPR coefficient of determination of 2.12 cm, 2.84 cm, 1.06, 0.19, 0.98, 0.77, and 97%, respectively, for the learning data and 1.73 cm, 3.31 cm, 0.99, 0.17, 0.97, 0.75, and 97%, respectively, for the examination data. The developed model has also been used in a parametric study to provide an insight into the sensitivity of the \({S}_{\mathrm{lc}}\) to the foundation width, building height, pressure applied on the foundation, thickness and relative density of the liquefiable layer, and earthquake intensity. The results obtained from the parametric study are reasonable and in agreement with previous studies in the literature. Thus, the developed model can be employed to optimize designs and to reduce design costs as it does not require complicated analyses and/or expensive computational facilities.

     

Mechanical behavior of 30–50 nm thick aluminum films under uniaxial tension

We present uniaxial tensile test results for 30–50 nm thick freestanding aluminum films. Young’s modulus and ductility were found to decrease monotonically with grain size. Reverse Hall–Petch behavior was observed with no appreciable room temperature creep. Non-linear elasticity with small irreversible deformation was observed for 50 nm thick specimens.     

Comparison of PF4/heparin ELISA assay with the 14C-serotonin release assay in the diagnosis of heparin-induced thrombocytopenia

The diagnosis of heparin-induced thrombocytopenia (HIT) may be affirmed by demonstrating heparin-dependent anti-platelet antibodies using the 14C-serotonin release assay (SRA). In this study, results of the SRA was compared with the recently described platelet factor 4 (PF4)/heparin enzyme-linked immunosorbent assay (ELISA). Compared with the SRA, the sensitivity and specificity of a PF4/heparin ELISA was 87% and 92%, respectively, using an assay developed in our laboratory; and 90% and 98%, respectively, using a commercially developed kit (Diagnostica Stago, Asnieres, France). However, antibodies to PF4/heparin were also detected in up to 8% of patients whose plasma was negative by SRA, and 23% of patients receiving heparin who were not thrombocytopenic. These data indicate that results obtained with the PF4/heparin ELISA and the SRA are generally in accord in patients with a clinical diagnosis of HIT. However, discrepant results occur in approximately 20% of cases because of the greater sensitivity of ELISA and the possible involvement of other heparin-binding proteins. The fact that each assay contributes independent information in some cases must be considered in the sequence of test performance and in providing consultation to the practicing hematologist.     

Enteric viral infections of calves and passive immunity

At least eight viruses have been identified, four within the last 5 yr, that produce diarrhea and pathological intestinal lesions in experimentally inoculated calves. Coronavirus and rotavirus frequently are associated with the neonatal calf diarrhea syndrome, but the etiologic role of the newly identified viruses is undefined. All diarrheal viruses replicate within small intestinal epithelial cells, resulting in variable degrees of villous atrophy. Immunity against these viral infections, therefore, must be directed toward protection of the susceptible intestinal epithelial cells. Because most of these viral infections occur in calves less than 3 wk of age, passive lactogenic immunity within the gut lumen plays an important role in protection. This report reviews methods of boosting rotavirus antibody responses in bovine mammary secretions and analyses of passive and active immunity in calves supplemented with colostrum and challenged by rotavirus. Results indicate rotavirus immunoglobulin G1 antibodies in colostrum and milk were elevated after intramuscular and intramammary vaccination of pregnant cows with an Ohio Agricultural Research and Development Center rotavirus vaccine but not after intramuscular immunization with a commercial rota-coronavirus vaccine. Feeding colostrum from intramuscular plus intramammary immunized cows to newborn calves challenged by rotavirus prevented diarrhea and shedding of rotavirus.     

Vortex structure in high-T c ceramic superconductors

We consider penetration of magnetic flux in the rare earth ceramic superconductors within the framework of a generalized Ginzburg-Landau theory, based on the coexistence of antiferromagnetism and superconductivity. We study vortex structure produced for a magnetic field close to . We make a new prediction that may serve to test the theory experimentally.     

Novel Organometallic Aromatic Azo Polyesters Based on Ferrocene

Some ferrocene containing aromatic azo polyesters were prepared by condensing 1,1-ferrocenedicarbonyl chloride with different azo groups containing aromatic diols, which were synthesized by diazotization coupling reaction from aromatic diamines. The polymeric products were separated as two portions on the basis of their solubility and subsequently characterized by their elemental analysis and FTIR spectral studies. Thermal properties of the products were measured by differential scanning calorimetry and thermogravimetry and the activation energies of pyrolysis were calculated using Horowitz and Metzger's method. The molecular weights of the soluble portions were determined by gel permeation chromatography (GPC) and these portions were also characterized by their inherent viscosities and UV-Vis spectroscopic studies.     

Interactive Evolutionary Multi-Objective Optimization Algorithm Using Cone Dominance

As the number of objectives increases, the performance of the Pareto dominance-based Evolutionary Multi-objective Optimization (EMO) algorithms such as NSGA-II, SPEA2 severely deteriorates due to the drastic increase in the Pareto-incomparable solutions. We propose a sorting method which classifies these incomparable solutions into several ordered classes by using the decision maker's (DM) preference information. This is accomplished by designing an interactive evolutionary algorithm and constructing convex cones. This method allows the DMs to drive the search process toward a preferred region of the Pareto optimal front. The performance of the proposed algorithm is assessed for two, three, and four-objective knapsack problems. The results demonstrate the algorithm's ability to converge to the most preferred point. The evaluation and comparison of the results indicate that the proposed approach gives better solutions than that of NSGA-II. In addition, the approach is more efficient compared to NSGA-II in terms of the number of generations required to reach the preferred point.     

Heat exchanger network synthesis with detailed exchanger designs: Part 1. A discretized differential algebraic equation model for shell and tube heat exchanger design

A new method for the detailed design of shell and tube heat exchangers is presented through the formulation of coupled differential heat equations, along with algebraic equations for design variables. Heat exchanger design components (tube passes, baffles, and shells) are used to discretize the differential equations and are solved simultaneously with the algebraic design equations. The coupled differential algebraic equation (DAE) system is suitable for numerical optimization as it replaces the nonsmooth log mean temperature difference (LMTD) term. Discrete decisions regarding the number of shells, fluid allocation, tube sizes, and number of baffles are determined by solving an LMTD-based method iteratively. The resulting heat exchanger topology is then used to discretize the detailed DAE model, which is solved as a nonlinear programming model to obtain the detailed exchanger design by minimizing an economic objective function through varying the tube length. The DAE model also provides the stream temperature profiles inside the exchanger simultaneously with the detailed design. It is observed that the DAE model results are almost equal to the LMTD-based design model for one-shell heat exchangers with constant stream properties but shows significant differences when streams properties are allowed to vary with temperature or the number of shells are increased. The accuracy of the solutions and the required computational costs show that the model is well suited for solving heat exchanger network synthesis problems combined with detailed exchanger designs, which is demonstrated in Part 2 of the paper.     

A secure image encryption scheme based on chaotic maps and affine transformation

Due to the interesting nonlinear dynamic properties of chaotic maps, recently chaos-based encryption algorithms have gained much attention in cryptographic communities. However, many encryption schemes do not fulfil the minimum key space requirement, which is an essential concern in many secure data applications. In this paper, an efficient chaos-based image encryption scheme with higher key space is presented. Even with a single round of encryption, a significantly larger key space can be achieved. The proposed scheme removes correlation among image pixels via random chaotic sequences, simply by XOR and addition operations. In order to resist against numerous attacks, we apply the affine transformation to get the final ciphertext image. The security of the proposed scheme is proved through histogram, contrast, PSNR, entropy, correlation, key space, key sensitivity and differential attack analysis. Many significant properties of chaotic maps, sensitivity to initial condition and control parameters, structure and attack complexity, make the anticipated scheme very reliable, practical and robust in various secure communication applications.     

Coordinated design of TCSC and PSS controllers using VURPSO and Genetic algorithms for multi-machine power system stability

Thyristor controlled series capacitor (TCSC) can regulate line impedance and therefore increase transferred power of the system. On the other hand power system stabilizer (PSS) increases dynamic stability of generator. To enhance the stability, combination of TCSC and PSS can be applied, and in such a case coordination of TCSC and PSS is essential. This paper applies this combined controller in order to enhance the stability of multi-machine system. Parameters of these controllers are optimized by velocity update relaxation particle swarm optimization (VURPSO) algorithm and Genetic algorithm (GA). The simulation results show that the combination of VURPSO algorithm and GA leads to a better design and stability.