The confinement of concrete columns provided by carbon fibre reinforced plastic (CFRP) sheets can be an efficient technique
for their structural strengthening. The principal advantages of this technique are the high strength-to-weight ratio, good
fatigue properties, non-corroding characteristics of the CFRP, and the facility of its application.
An experimental research program, that included tests on 54 short column specimens, was carried out to investigate the gain
in strength and ductility of concrete columns externally confined by CFRP wrapping. The variables studied were the column
cross section shape (circular, square and rectangular) and the amount of confinement expressed in the number of CFRP sheet
layers applied to the models (one or two layers).
On the basis of the obtained results, equations were proposed to calculate the confined concrete strength and the ultimate
confined concrete strain as a function of the confining lateral stress for each of the cross section geometry used, circular,
square and rectangular. The estimations given by these equations and by those from formulas encountered in the literature
were compared with the experimental ones and general conclusions were, finally, drawn.
Résumé Le confinement de colonnes de béton assuré par des feuilles de plastique renforcé par des fibres de carbone (CFRP) peut être
une technique efficace pour leur comportement structural. Les principaux avantages de cette technique sont la haute relation
résistance-poids, des bonnes propriétés de fatigue, les caractéristiques non-corrosives du CFRP, et la facilité de leur application.
Un programme expérimental comprenant des essais sur 54 colonnes courtes fut entrepris en vue de déterminer le gain de résistance
et de ductilité de colonnes en béton confinées sur le plan externe en les recouvrant de feuilles de CFRP. Les variables étudiées
étaient la forme de la section transversale (circulaire, carrée et rectangulaire), et la quantité de renforcement, mesurée
par le nombre de feuilles de CFRP appliquées aux modèles (une ou deux couches).
En prenant comme base les résultats obtenus, des équations ont été proposées pour calculer la résistance du béton confiné
et sa déformation spécifique ultime en fonction de la contrainte latérale de confinement, pour chaque forme de section transversale
utilisée, circulaire, carrée et rectangulaire. Les estimations données par ces équations et celles données par des formules
trouvées dans la litérature ont été comparées avec les résultats expérimentaux et des conclusions générales ont finalement
été établies.
Of 27 amino acids studied, most had some antioxidant activity when added in aqueous solution to either safflower oil or a mixture of sunflower and cottonseed oil (active oxygen and storage methods). Cysteine-HCl, glutamic acid-HCl (in the mixture), and glutamic acid-HCl (in safflower oil) behaved as prooxidants. When added as a solid, most amino acids were ineffective. The protection factors of these amino acids were less than 1.3 in safflower oil with methionine, proline, lysine and cysteine providing the highest activ-ity. In the oil mixture (which had a higher metal content) lysine, arginine, glutamic acid, methionine, and hydroxyproline were anti-oxidant with protection factors of up to 1.85. Chelation of metals by amino acids was presumably responsible for the antioxidant activity. The increase in cysteine concentration up to 1% has more than doubled the protection factor in Bint oil (compared with the 0.01% level), whereas with some other amino acids the increase was either small or slight. 相似文献
This paper presents results of an experimental program conducted to investigate the capacity of hydration products of different cementing materials to retain “bound” alkalis when the alkalinity of the surrounding solution drops. The study covered paste samples containing high-alkali Portland cement and various levels of silica fume and/or fly ash. The results showed that the ability of the hydration products of cement-fly ash systems to bind alkalis is a function of the CaO content of the fly ash, the binding increasing as the calcium content decreases. High-alkali fly ashes (Na2Oe > 5.0% and CaO in the range of 15% to 20%) showed considerable amounts of alkali contributed to the test solutions. Silica fume does not have a high capacity to retain alkalis in its hydration products; however, ternary blends containing silica fume and fly ash have excellent capacity to bind and retain alkalis. 相似文献
Activation of pulps during acetylation, by prior mechanical or chemical treatment, has been investigated. The effect of degree of beating on the acetylation rate of wood and bagasse pulps has been studied. It is found that the acetylation rate of pulps increases when the degree of beating of pulps is increased to a definite degree, after which it slows down. The maximum reactivity of bagasse pulp is obtained at 50°SR, while that of wood pulp is observed at 30°SR. The effect of grafting of acrylonitrile onto bagasse and wood pulps on their reactivity during acetylation has been also studied. The results indicate that grafting of acrylonitrile onto pulps has a favorable effect on their acetylation rate. This is dependent on the degree of grafting as well as the origin of pulp fibers. The most suitable method of activation during acetylation reaction is dependent on the origin of the pulp. The reactivity of bagasse pulp during acetylation is influenced more by beating of pulp, prior to the reaction, than by the grafting of acrylonitrile onto pulp. On the other hand, the acetylation reaction of wood pulp is activated by grafting rather than by beating. Also the effect of the activation process, mechanical or chemical, on the strength properties of the paper sheets produced from acetylated pulps has been investigated. Chemical activation of wood pulp prior to acetylation resulted in pulp with slightly higher strength properties than that activated by mechanical means. But, in the case of bagasse pulp, mechanical activation resulted in a pulp with strength superior to that produced by chemical activation. 相似文献
A weight loss technique was used to determine the corrosion inhibition efficiency of synthesized alkyl mono-and dibenzoate
triethanolammonium bromide derivatives (TEAMB, TEADB) in an acidic medium (2 N HCl) at different doses (50, 100, and 200 ppm).
The results showed that monoderivatives had a higher corrosion inhibition efficiency than diderivatives. The results were
correlated with several factors, including the alkyl chain length of the hydrophobic chains, interfacial tension (IT), critical
micelle concentration (CMC), and adsorption free energy of these inhibitors. Increasing the geometric length of the alkyl
chains in the synthesized inhibitors had an increasing effect on their corrosion inhibition efficiency, whereas decreasing
the CMC and IT had an increasing effect on their tendency toward corrosion inhibition. The number of hydrophobic chains attached
to the inhibitor molecules had a vital influence on their efficiency as corrosion inhibitors. 相似文献
Automated techniques for Arabic content recognition are at a beginning period contrasted with their partners for the Latin and Chinese contents recognition. There is a bulk of handwritten Arabic archives available in libraries, data centers, historical centers, and workplaces. Digitization of these documents facilitates (1) to preserve and transfer the country’s history electronically, (2) to save the physical storage space, (3) to proper handling of the documents, and (4) to enhance the retrieval of information through the Internet and other mediums. Arabic handwritten character recognition (AHCR) systems face several challenges including the unlimited variations in human handwriting and the leakage of large and public databases. In the current study, the segmentation and recognition phases are addressed. The text segmentation challenges and a set of solutions for each challenge are presented. The convolutional neural network (CNN), deep learning approach, is used in the recognition phase. The usage of CNN leads to significant improvements across different machine learning classification algorithms. It facilitates the automatic feature extraction of images. 14 different native CNN architectures are proposed after a set of try-and-error trials. They are trained and tested on the HMBD database that contains 54,115 of the handwritten Arabic characters. Experiments are performed on the native CNN architectures and the best-reported testing accuracy is 91.96%. A transfer learning (TF) and genetic algorithm (GA) approach named “HMB-AHCR-DLGA” is suggested to optimize the training parameters and hyperparameters in the recognition phase. The pre-trained CNN models (VGG16, VGG19, and MobileNetV2) are used in the later approach. Five optimization experiments are performed and the best combinations are reported. The highest reported testing accuracy is 92.88%.
Gelatin was doped with 1 %, 3 %, 5 % and 10 % cadmium sulfide nanoparticles in weight concentrations forming the gelatin-cadmium sulfide nanocomposites and irradiated by various electron beam doses equals 50 kGy, 75 kGy, 100 kGy, and 150 kGy using 3 MeV – 3 mA electron accelerator. The applied alternating current electrical field frequency ranging from 70 Hz to 5 MHz is what caused the fluctuation in dielectric properties and alternating current electrical conductivity of these nanocomposites. The results showed that the films of 1 %, 3 %, 5 %, and 10 % for blank (nanocomposite film without electron beam irradiation) nanocomposites had the highest dielectric parameters (έ, ϵ′′, tan δ) at 0.5 kHz with values of (0.696, 0.0233, 0.034), (0.533, 0.0114, 0.0215), (0.402, 0.001196, 0.003), and (0.459, 0.00418, 0.0091), respectively. However, the lowest dielectric parameters were (0.645, 0.00618, 0.0066), (0.523, 0.00165, 0.0215), (0.417, 0.00035, 0.0008), and (0.455, 0.00066, 0.0015) at 5 MHz, respectively. The highest conductivity values for blank nanocomposites of 1 %, 3 %, 5 %, and 10 % were 1.79×10−4 S/m, 1.45×10−4 S/m, 1.16×10−4 S/m, 1.27×10−4 S/m at 5 MHz, and the lowest values were 1.92×10−8 S/m, 1.49×10−8 S/m, 1.13×10−8 S/m, 1.26×10−8 S/m at 0.5 kHz, respectively. For irradiated nanocomposites at 5 MHz, the dielectric constant order for 1 % was 100 kGy, 150 kGy, 50 kGy, and 75 kGy with values 0.63, 0.537, 0.532, and 0.523, respectively. For 10 % weight concentration, the order was 50 kGy, 100 kGy, 150 kGy, and 75 kGy with values 0.515, 0.477, 0.47, and 0.437, respectively. Otherwise the dielectric constant order for 3 % and 5 % was 100 kGy, 75 kGy, 150 kGy, and 50 kGy. The highest dielectric properties and conductivity values for blank and irradiated nanocomposites were observed at 100 kGy for 1 %, 3 %, and 5 %. 相似文献
This paper presents a general approach for the identification of objects in procedural programs. The approach is based on neural architectures that perform an unsupervised learning of clusters. We describe two such neural architectures, explain how to use them in identifying objects in software systems and briefly describe a prototype tool, which implements the clustering algorithms. With the aid of several examples, we explain how our approach can identify abstract data types as well as groups of routines which reference a common set of data. The clustering results are compared to the results of many other object identification techniques. Finally, several case studies were performed on existing programs to evaluate the object identification approach. Results concerning two representative programs and their generated clusters are discussed. 相似文献
Abstract The main brackish groundwater resources in the State of Kuwait are the groundwater located in the Kuwait Group and the Dammam limestone aquifers. Most of the groundwater used in the State of Kuwait is for irrigation, some part of it is used for domestic purposes and for small scale industries. Since rainfall is seasonal and is less than the annual evaporation, the recharge from rainfall is negligible. Water levels in both the aquifers are highly affected by the pumping rate from each well. The groundwater is extracted heavily resulting in decline of water levels and the deterioration of groundwater quality though there is underflow from Saudi Arabia. Improvement of the groundwater management is essential for maintaining long-term productivity of the aquifers in the State of Kuwait. 相似文献