Polyaniline-multiwalled carbon nanotube composites: Characterization by WAXS and TGA

Polyaniline/carboxylated multi-walled carbon nanotube (PAni/c-MWNT) nanocomposites have been synthesized by micellar aided emulsion polymerization with various c-MWNTs compositions, viz., 0.5, 1, 5, and 10 wt %. The microcrystalline parameters such as the nanocrystal size (〈N〉), lattice strain (g), interplanar distance (d_hkl), width of the crystallite size distribution, surface weighted crystal size (D_s), and volume of the ordered regions were calculated from the X-ray data by using two mathematical models, namely the Exponential distribution and Reinhold distribution methods. The effects of heat ageing on the microcrystalline parameters of the PAni/c-MWNT nanocomposites were also studied and the results are correlated. The thermal stability and electrical resistivity of the PAni/c-MWNT nanocomposites were examined with thermogravimetric analysis (TGA) and a conventional two-probe method. The TGA data indicate that the thermal stability of the nanocomposites improved after the incorporation of c-MWNTs. The influence of temperature on the resistivity of the nanocomposites was also measured. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

PriorVAE: encoding spatial priors with variational autoencoders for small-area estimation

Gaussian processes (GPs), implemented through multivariate Gaussian distributions for a finite collection of data, are the most popular approach in small-area spatial statistical modelling. In this context, they are used to encode correlation structures over space and can generalize well in interpolation tasks. Despite their flexibility, off-the-shelf GPs present serious computational challenges which limit their scalability and practical usefulness in applied settings. Here, we propose a novel, deep generative modelling approach to tackle this challenge, termed PriorVAE: for a particular spatial setting, we approximate a class of GP priors through prior sampling and subsequent fitting of a variational autoencoder (VAE). Given a trained VAE, the resultant decoder allows spatial inference to become incredibly efficient due to the low dimensional, independently distributed latent Gaussian space representation of the VAE. Once trained, inference using the VAE decoder replaces the GP within a Bayesian sampling framework. This approach provides tractable and easy-to-implement means of approximately encoding spatial priors and facilitates efficient statistical inference. We demonstrate the utility of our VAE two-stage approach on Bayesian, small-area estimation tasks.     

Efficient recursive least squares parameter estimation algorithm for accurate nanoCMOS variable gain amplifier performances

ABSTRACT

With the aggressive scaling of integrated circuit technology, parametric estimation is a critical task for designers who looked for solutions to the challenges of some Nanoscale CMOS parameters. This paper presented the prediction of primary parameters of CMOS transistor for 16 nm to 10 nm process nodes using both of Bisquare Weights (BW) method and a novel recursive least squares (RLS) parameter estimation algorithm. The proposed RLS algorithm consists of the minimisation of a quadratic criterion relating to the prediction error in order to attain the best estimated parameters of the developed mathematical model. The obtained results thanks to the proposed RLS algorithm were better than those reached using the BW method. Comparisons between Predictive Technology Model (PTM) data and parameters estimated with RLS algorithm were made to check the validity and the consistency of the proposed algorithm. These predicted primary parameters were helpful to estimate and to optimise the performances of the Variable Gain Amplifier (VGA) which was a basic circuit element with a key role in the design of new upcoming receivers.     

Computer-controlled mechanical simulation of the artificially ventilated human respiratory system

A mechanical lung simulator can be used to simulate specific lung pathologies, to test lung-function equipment, and in instruction. A new approach to mechanical simulation of lung behavior is introduced that uses a computer-controlled active mechatronic system. The main advantage of this approach is that the static and dynamic properties of the simulator can easily be adjusted via the control software. A nonlinear single-compartment mathematical model of the artificially ventilated respiratory system has been derived and incorporated into the simulator control system. This model can capture both the static and dynamic compliance of the respiratory system as well as nonlinear flow-resistance properties. Parameters in this model can be estimated by using data from artificially ventilated patients. It is shown that the simulation model fits patient data well. This mathematical model of the respiratory system was then matched to a model of the available physical equipment (the simulator, actuators, and the interface electronics) in order to obtain the desired lung behavior. A significant time delay in the piston motion control loop has been identified, which can potentially cause oscillations or even instability for high compliance values. Therefore, a feedback controller based on the Smith-predictor scheme was developed to control the piston motion. The control system, implemented on a personal computer, also includes a user-friendly interface to allow easy parameter setting.     

Performance of Layered Steered Space–Time Codes in Wireless Systems

Layered Steered Space–Time Codes (LSSTC) is a recently proposed multiple-input multiple-output (MIMO) system that combines the benefits of vertical Bell Labs space–time (VBLAST) scheme, space–time block codes (STBC) and beamforming. In this paper, we derive the error performance and capacity of a single-user LSSTC system. The analysis is general enough to any layer ordering and modulation schemes used. In addition, the derived analysis is general for any LSSTC structure in which layers may have different number of antenna arrays and may be assigned power according to any power allocation. Furthermore, we analytically investigate the tradeoff between the main parameters of the LSSTC system, i.e., diversity, multiplexing and beamforming. Our results give recursive expressions for the probability of error for LSSTC which showed nearly perfect match to the simulation results. Results have also revealed the possibility of designing an adaptive system in which it was shown that combining beamforming, STBC, and VBLAST has better performance than VBLAST at high SNR range.     

On the Performance of FFT/DWT/DCT-based OFDM Systems with Chaotic Interleaving and Channel Estimation Algorithms

The efficiency of data transmission over fading channels in orthogonal frequency division multiplexing (OFDM) systems depends on the employed interleaving method. In this study, we propose an improved chaotic interleaving scheme which aims to improve the performance of OFDM system under fading channel. In the proposed scheme, the binary data is interleaved with chaotic Baker map prior to the modulation process. In the sequel, significant degree of encryption is being added during data transmission. The performance of the proposed approach is tested on the conventional fast Fourier transform OFDM, discrete wavelet transform OFDM, and discrete cosine transform OFDM with and without chaotic interleaving. Furthermore, an expectation–maximization (EM) algorithm is proposed for improving channel impulse response (CIR) estimation based on a maximum likelihood principle. The proposed scheme makes use of EM algorithm to update the channel estimates until convergence is reached. The simulation results show the efficiency of the proposed algorithms under Rayleigh fading environments where the symbol error rate essentially coincides with that of the perfect channel case after the fifth EM iteration.     

Spectrum harvesting for heterogeneous wireless networks integration

Massive capacity demand is a major impetus behind the advances, in various ways, of today and near future wireless communication networks. To face this challenge, more wireless spectrum is needed, efficient usage of this spectrum is necessary, and adequate architectures are required. In this paper, we present a conceptual solution based on a cognitive-radio-inspired cellular network, for integrating idle spectrum resources of different wireless networks into a single mobile heterogeneous wireless network. We describe the conceptual architecture of this integrating network, referred to as Integrating cognitive-radio-inspired cellular network (I-CRICNet), and present a cooperative spectrum-harvesting scheme that keeps the former supplied with spectrum resources. In the latter scheme, we make extensive use of cross-correlated sequences (CSSs), for events signaling purposes. This choice is motived by the particularly interesting characteristics of the CSSs, namely, duration shortness, robustness to bad radio conditions, detection rather than decoding, and low probability of collision. As an illustration, we propose a reporting and detection scheme, in the context of OFDMA systems, and provide performance results from simulations to validate our proposal.

     

Mobility management support and performance analysis for wireless MPLS networks

Multi‐Protocol Label Switching (MPLS) is deployed in the Internet backbone to support service differentiation and traffic engineering. In recent years, there has been interest in extending the MPLS capability to wireless access networks for mobility management support. In this paper, we present analysis of Micro Mobile MPLS, a new micro‐mobility management scheme which integrates the Mobile IP and MPLS protocols by using two‐level hierarchy architecture. Our proposal supports two protocol variants. First, the fast handoff process, which anticipates the LSP procedure set‐up with neighboring locations where a mobile node (MN) may move to, is provided to reduce service disruption. Second, a new mechanism based on the forwarding chain concept is proposed to track efficiently the host mobility within a domain. This concept can significantly reduce registration update costs and provide low handoff latency. Analytical models are developed and simulations are conducted to justify the benefits of our proposed mechanisms. Copyright © 2006 John Wiley & Sons, Ltd.     

High static gain single-phase PFC based on a hybrid boost converter

In this paper, a single-phase unity power factor rectifier, based on a hybrid boost converter, resulting from the integration of a conventional dc–dc boost converter and a switched-capacitor voltage doubler is proposed, analysed, designed and tested. The high-power rectifier is controlled by two feedback loops with the same control strategy employed in the conventional boost-based rectifier. The main feature of the proposed rectifier is its ability to output a dc voltage larger than the double of the peak value of the input line voltage, while subjecting the power switches to half of the dc-link voltage, which contributes to reducing the cost and increasing the efficiency. Experimental data were obtained from a laboratory prototype with an input voltage of 220 Vrms, line frequency of 60 Hz, output voltage of 800 Vdc, load power of 1000 W and switching frequency of 50 kHz. The efficiency of the prototype, measured in the laboratory, was 96.5% for full load and 97% for half load.     

Development of the transmission line matrix method in acoustics applications to higher modes in the vocal tract and other complex ducts

Most traditional theories of speech production are currently based on plane waves. However, it is well known that, for acoustic waveguides, higher acoustical modes start to propagate and can become predominant above cut-on frequencies. This paper thus presents the transmission line matrix method, a numerical method initially designed for electromagnetic waves, and its adaptation to acoustic waveguides. The method, and in particular the representation of boundary conditions, is validated by comparison with known analytical theories. It is then used to show the dramatic effect of higher order modes upon the radiation characteristics of uniform ducts, as well as the importance of source location. Finally, first applications to bent and bifurcating rectangular ducts are presented, and the transfer function of a vowel [a] is shown to display frequency patterns typical of those measured on human subjects and that cannot be explained by one-dimensional propagation only. © 1998 John Wiley & Sons, Ltd.