Dual effect synergistically triggered Ce:(Y,Tb)3(Al,Mn)5O12 transparent ceramics enabling a high color-rendering index and excellent thermal stability for white LEDs

Ce:Y₃Al₅O₁₂ transparent ceramics (TCs) with appropriate emission light proportion and high thermal stability are significant to construct white light emitting diode devices with excellent chromaticity parameters. In this work, strategies of controlling crystal-field splitting around Ce³⁺ ion and doping orange-red emitting ion, were adopted to fabricate Ce:(Y,Tb)₃(Al,Mn)₅O₁₂ TCs via vacuum sintering technique. Notably, 85.4 % of the room-temperature luminescence intensity of the TC was retained at 150 °C, and the color rendering index was as high as 79.8. Furthermore, a 12 nm red shift and a 16.2 % increase of full width at half maximum were achieved owing to the synergistic effects of Tb³⁺ and Mn²⁺ ions. By combining TCs with a 460 nm blue chip, a warm white light with a low correlated color temperature of 4155 K was acquired. Meanwhile, the action mechanism of Tb³⁺ ion and the energy transfer between Ce³⁺ and Mn²⁺ ions were verified in prepared TCs.     

Proving termination of GHC programs

A transformational approach for proving termination of parallel logic programs such as GHC programs is proposed. A transformation from GHC programs to term rewriting systems is developed; it exploits the fact that unifications in GHC-resolution correspond to matchings. The termination of a GHC program for a class of queries is implied by the termination of the resulting rewrite system. This approach facilitates the applicability of a wide range of termination techniques developed for rewrite systems in proving termination of GHC programs. The method consists of three steps: (a) deriving moding information from a given GHC program, (b) transforming the GHC program into a term rewriting system using the moding information, and finally (c) proving termination of the resulting rewrite system. Using this method, the termination of many benchmark GHC programs such as quick-sort, merge-sort, merge, split, fair-split and append, etc., can be proved. This is a revised and extended version of Ref. 12). The work was partially supported by the NSF Indo-US grant INT-9416687 Kapur was partially supported by NSF Grant nos. CCR-8906678 and INT-9014074. M. R. K. Krishna Rao, Ph.D.: He currently works as a senior research fellow at Griffith University, Brisbane, Australia. His current interests are in the areas of logic programming, modular aspects and noncopying implementations of term rewriting, learning logic programs from examples and conuterexamples and dynamics of mental states in rational agent architectures. He received his Ph.D in computer science from Tata Institute of Fundamental Research (TIFR), Bombay in 1993 and worked at TIFR and Max Planck Institut für Informatik, Saarbrücken until January 1997. Deepak Kapur, Ph.D.: He currently works as a professor at the State University of New York at Albany. His research interests are in the areas of automated reasoning, term rewriting, constraint solving, algebraic and geometric reasoning and its applications in computer vision, symbolic computation, formal methods, specification and verification. He obtained his Ph.D. in Computer Science from MIT in 1980. He worked at General Electric Corporate Research and Development until 1987. Prof. Kapur is the editor-in-chief of the Journal of Automated Reasoning. He also serves on the editorial boards of Journal of Logic Programming, Journal on Constraints, and Journal of Applicable Algebra in Engineering, Communication and Computer Science. R. K. Shyamasundar, Ph.D.: He currently works as a professor at Tata Institute of Fundamental Research (TIFR), Bombay. His current intersts are in the areas of logic programming, reactive and real time programming, constraint solving, formal methods, specification and verification. He received his Ph.D in computer science from Indian Institute of Science, Bangalore in 1975 and has been a faculty member at Tata Institute of Fundamental Research since then. He has been a visiting/regular faculty member at Technological University of Eindhoven, University of Utrecht, IBM TJ Watson Research Centre, Pennsylvania State University, University of Illinois at Urbana-Champaign, INRIA and ENSMP, France. He has served on (and chaired) Program Committees of many International Conferences and has been on the Editorial Committees.     

Minimizing power dissipation in optical interconnects at low voltage using optimal modulator design

A strong motivation for insertion of optical interconnects in short-distance applications such as chip-to-chip or back-plane communication, apart from high bit rates, is their potential to achieve these bit rates at low power compared to the currently prevalent copper based interconnects. Thus, it is imperative to construct design methodologies which minimize the total optical link power dissipation. We present one such methodology, where we optimize the quantum-well modulators to minimize the power dissipation in modulator-based optical interconnects. In the first part of the paper, the focus is on obtaining the optimal modulator metrics [contrast ration (CR) and insertion loss], which yield the lowest total power (receiver and the modulator). The trends are studied as a function of the input laser power and bit rate. Having obtained the desirable modulator metrics and the corresponding power dissipation, in the second part, the focus is on the feasibility of these metrics in the light of voltage swing constraints. The biggest concern with the modulator based optical link is the low CR, especially at low voltage swing. While studying these concerns, we also provide insight into the physical design of the modulator including, its intrinsic region thickness, pre-bias voltage, and the size and the number of quantum-wells. Specifically, we outline the method to obtain the design parameters, which allows minimum power dissipation with the least laser power. This ultimately yields higher aggregate I/O bandwidth for chip to chip communication in power limited chips.     

Improvement of Concrete Properties and Reinforcing Steel Inhibition Using a Natural Product Admixture

The use of a natural white juice, taken from magrabe banana stem, as concrete admixture to improve mechanical and physicrvchemical properties of concrete has been studied. The compressive strength, bulk density the free lime liberated during hydration and the combined water content were determined. The results indicate that the admixture acts as a retarder in most cases and as accelerator in some ones. Also, the admixture effect on the corrosion resistance of the reinforcing steel against surrounding aggressive media has been investigated using galvanostatic polarization technique. The addition of 0.2% admixture leads to the more inhibition of the steel     

Phase equilibria of crude oils using the continuous thermodynamics approach

This paper deals with the application of continuous thermodynamics to light and heavy oil systems using the Peng- Robinson equation of state. The composition of the high molar mass components in a reservoir oil is described by a continuous distribution function of some characterizing quantity, e.g. molar mass or boiling temperature. Numerical Gaussian quadrature methods are used to generate pseudo-components and their mole fractions from distribution data. Several examples are presented for phase equilibria of solvent/crude oil systems. The results showed that semi-infinite distribution functions, such as the Γ function, cannot be applied to all cases, e.g. dew point calculations. The Gauss- Legendre quadrature method coupled with spline fitting worked best for heavy oil systems.     

Flexible and light weight copper indium diselenide solar cells on polyimide substrates

Thin film flexible CuInSe₂ (CIS) solar cells have been fabricated for the first time on light-weight polymeric substrates. Evaporated Cu---In alloy precursors were selenized in H₂Se atmosphere at around 400°C to grow the CIS absorber layers. Low temperature techniques which are compatible with the polymeric substrates were used to deposit the window layers of CdS and ZnO. The demonstrated active area conversion efficiency of 9.3% makes this light-weight device very attractive for many terrestrial and space power generation applications where high specific power and mechanical flexibility are needed.     

Electricity generation from rice husk in Indian rice mills: Potential and financial viability

Rice husk generated as a by-product of rice processing is an important energy resource. The availability of this resource in India has been assessed and the technologies for exploitation of its energy potential in rice processing industry discussed. Nomographs have been developed for estimation of the husk required to meet the energy demand of parboiling, drying and milling operations. The unit cost of electricity using rice husk gasifier-based power generation systems has been calculated and its financial feasibility assessed in comparison with utility-supplied and diesel-generated electricity. With the cost and efficiency data assumed here, the unit cost of electricity produced by rice husk gasifier-dual fuel engine-generator system varies between Rs 2/kWh and Rs 7/kWh. (Note: 35 Rs approximates to $US 1.)     

Fabrication and selective surface modification of 3-dimensionally textured biomedical polymers from etched silicon substrates

A new method is described for producing biomedically relevant polymers with precisely defined micron scale surface texture in the x, y, and z planes. Patterned Si templates were fabricated using photolithography to create a relief pattern in photoresist with lateral dimensions as small as 1 micron. Electroless Ni was selectively deposited in the trenches of the patterned substrate. The Ni served as a resilient mask for transferring the patterns onto the Si substrate to depths of up to 8.5 microns by anisotropic reactive ion etching with a fluorine-based plasma. The 3-dimensional (3-D) textured silicon substrates were used as robust, reusable molds for pattern transfer onto poly (dimethyl siloxane), low density poly (ethylene), poly (L-lactide), and poly (glycolide) by either casting or injection molding. The fidelity of the pattern transfer from the silicon substrates to the polymers was 90 to 95% in all three planes for all polymers for more than 60 transfers from a single wafer, as determined by scanning electron microscopy and atomic force microscopy. Further, the 3-D textured polymers were selectively modified to coat proteins either in the trenches or on the mesas by capillary modification or selective coating techniques. These selectively patterned 3-D polymer substrates may be useful for a variety of biomaterial applications.     

Clinical outcome of patients infected with hepatitis C virus infection on survival after primary liver transplantation under tacrolimus

In 1994, as a result of both programme evaluations which identified students' fears and apprehensions about their practical ability, and a review of the literature on skill acquisition, experiential skills teaching was resumed within the faculty. Having invested considerable finance into the reconstruction of a skills centre to teach skills, it is now imperative that its use be formally evaluated. Part of the evaluative process includes a review of the empirical literature on the acquisition of psychomotor skills in nursing. This paper summarizes this review.