A multicriteria approach to identify investment opportunities for the exploitation of the clean development mechanism

The aim of the present paper is to investigate the prospects for the exploitation of the Kyoto Protocol's Clean Development Mechanism (CDM) in Greece. The paper is addressing 3 questions: in which country, what kind of investment, with which economic and environmental return? The proposed approach is based on a multicriteria analysis for identifying priority countries and interesting investment opportunities in each priority country. These opportunities are then evaluated through a conventional financial analysis in order to assess their economic and environmental attractiveness. To this purpose, the IRR of a typical project in each investment category is calculated by taking into account country-specific parameters, such as baseline emission factors, load factors, costs, energy prices etc. The results reveal substantial differences in the economic and environmental return of different types of projects in different host-countries and show that for the full exploitation of the CDM a multifaceted approach to decision-making is necessary.     

Employment benefits of electricity generation: A comparative assessment of lignite and natural gas power plants in Greece

This paper aims at developing an integrated approach for estimating the employment benefits associated with power-generation technologies. The proposed approach exploits the input–output methodology for estimating the direct, indirect and induced employment effects associated with the energy project in question, as well as two different valuation techniques, namely the “opportunity cost of labour” approach and the “public expenditures” approach, for expressing these effects in monetary terms. This framework has been implemented to estimate the employment benefits resulting from the development of a lignite-fired and a natural gas-fired power plant in Greece, taking into account all the stages of the corresponding fuel cycles that are undertaken domestically. The results of the analysis clearly show that lignite-fired electricity generation results in significant employment benefits amounting to 2.9–3.5 €/MWh in the basic scenario. On the other hand, the employment benefits associated with the examined natural gas unit were estimated at 0.4–0.6 €/MWh in the basic scenario. It is also worth mentioning that the significant environmental externalities of the lignite-fired electricity in Greece that have been presented in a number of studies can only be partially compensated by the estimated employment benefits.     

Characterization of filamentous fungi isolated from Moroccan olive and olive cake: toxinogenic potential of Aspergillus strains

During the 2003 and 2004 olive oil production campaigns in Morocco, 136 samples from spoiled olive and olive cake were analyzed and 285 strains were isolated in pure culture. Strains included 167 mesophilic strains belonging to ten genera: Penicillium, Aspergillus, Geotrichum, Mucor, Rhizopus, Trichoderma, Alternaria, Acremonium, Humicola, Ulocladium as well as 118 thermophilic strains isolated in 2003 and 2004, mainly belonging to six species: Aspergillus fumigatus, Paecilomyces variotii, Mucor pusillus, Thermomyces lanuginosus, Humicola grisea, and Thermoascus aurantiacus. Penicillium and Aspergillus, respectively, 32.3 and 26.9% of total isolates represented the majority of mesophilic fungi isolated. When considering total strains (including thermotolerant strains) Aspergillus were the predominant strains isolated; follow-up studies on mycotoxins therefore focused primarily on aflatoxins (AFs) and ochratoxin A (OTA) from the latter strains. All isolated Aspergillus flavus strains (9) and Aspergillus niger strains (36) were studied in order to evaluate their capacity to produce AFs and OTA, respectively, when grown on starch-based culture media. Seven of the nine tested A. flavus strains isolated from olive and olive cake produced AF B1 at concentrations between 48 and 95 microg/kg of dry rice weight. As for the A. niger strains, 27 of the 36 strains produced OTA.     

Solar energy and the abatement of atmospheric emissions

In spite of the fact that solar energy is a “clean” energy form, gaseous pollutants are emitted during the manufacturing of the systems necessary for its utilisation. An attempt is made in this paper to estimate the level of atmospheric pollutants emitted during the successive stages which make up the manufacture process for solar water heating (SWH) systems, and to evaluate these results in comparison with the respective pollutant emission levels attributed to the generation of electricity in Greece's conventional power plants. As energy consumption is recognised as the main source of atmospheric pollution, a Life Cycle Analysis (LCA) method was applied, focusing on the most energy-consuming stages of the SWH system production process. The conclusions of the analysis indicate that the emissions of gaseous pollutants associated with the utilisation of solar energy are considerably lower than those caused by the production of electricity in conventional systems, thereby substantiating that solar energy utilisation can make a notable contribution to the abatement of atmospheric pollution.     

Gamma irradiation of air-dried olive leaves: Effective decontamination and impact on the antioxidative properties and on phenolic compounds

Olive leaves are commercialized for their antioxidative value due to their valuable phenolic compounds. The present study aimed to evaluate the effect of gamma irradiation on microbial load, on antioxidative properties and on phenolic compounds of air-dried olive leaves. Irradiation was applied up to 25 kGy (5 kGy intervals) to powdered and intact samples. Total aerobic bacteria, yeast and mold, and lactic acid bacteria were counted after gamma irradiation. Decontamination was obtained at 20 kGy. The radioresistance of microbial population was high with D₁₀ values between 9.74 and 25.12 kGy. Besides, gamma irradiation up to 25 kGy was found to maintain the antioxidant capacity, molecular mass distribution of polyphenolics, total phenolics, ortho-diphenols, flavonoids, oleuropein, verbascoside and rutin contents.     

Glucoamylases production of Aspergillus niger in solid state fermentation using a continuous counter-current reactor

This work presents the continuous production of fungal biomass and glucoamylase by solid state fermentation (SSF) in a counter-current reactor adapted for this purpose. Pre-germinated conidia of Aspergillus niger were used as an inoculum, and sugarcane bagasse, embedded with a nutritive solution, was the solid support. The solids residence time distribution (RTD) was carried out by feeding one impule of blue-coloured humidified bagasse and its RTD was fixed at 20 h. This study demonstrated that the values of the measured parameters (pH, moisture, biomass, glucoamylases production) were similar to those reported for batch SSF using the same solid support and micro-organism. A marked increase in biomass occurred from the progressive compartment (from compartment 1 to 9) into the reactor and the enzyme production was important (40 IU g⁻¹ dry exit solids). No mycelium damage or sporulation was observed by microscopy analysis. The above results confirmed that the continuous production of enzymes by SSF under no sterile conditions was successful. Inoculation with pre-germinated conidia shortened the processing time and allowed control of the age of the mycelium in each compartment. Aeration was accomplished by natural convection and moisture content had to be controlled. This process can be applied to the continuous production of fungal biomass and metabolites in SSF with industrial applications using environmental-friendly biotechnology.     

Next allocation phase of the EU emissions trading scheme: How tough will the future be?

The development of National Allocation Plans (NAPs) for the first phase 2005–2007 of the EU emissions trading scheme (EU-ETS) was accompanied by the stated concern of the industrial enterprises with installations that fall under the scope of the relevant Directive 2003/87, since the impacts of the allocation in their financial and technical modes of operation were judged to be severe. Thus, the intensity of the negotiations for the next allocation phase (i.e. 2008–2012), is expected to be heated. With a view to assisting enterprises, especially in the energy sector or for which energy use and its management is a crucial part of their activity, to incorporate in their business plans the impacts of the Directive in an informed manner, an attempt is made here to explore the constraints and the available options that will guide the coming EU-ETS potential allocations. In the analysis, the credits derived from the use of CDM are specifically taken into account. The results show that the next allocations would tend to be significantly more stringent than the current ones because of the combined effect of no inter-period transfer of allowances, the amount of CDM credits expected to be available compared to the amount of effort that would be required and the yield of emission reductions from existing or planned policies and measures. It becomes then crucial, if not imperative, for the enterprises involved as well as national governments to examine carefully means to address their obligations under the Directive.     

Evaluating the need for economic support policies in promoting greenhouse gas emission reduction measures in the building sector: The case of Greece

During the last decade the CO₂ emissions from the residential and tertiary sectors have been rising continuously. This is cause for concern but also an area to be targeted for emission reduction measures in national action plans. This paper proposes a methodological framework, using the Greek building sector (characterized by an aging building stock constructed mostly in the period before 1980) as a case study for the examination of the economic attractiveness of possible measures, which incorporates crucial parameters such as local climate, use of buildings, age of building stock, etc. that affect the energy conservation potential and consequently the economic performance of available measures. Utilizing this framework, the approach is able to classify measures into three categories, namely ‘win–win’ cases (i.e. where the implementation of emission reduction measures presents a net economic benefit for end-users), measures that require the implementation of appropriate economic support policies in order to make them economically attractive for end-users, and measures that have excessive cost. The results indicate that the emissions reduction potential of ‘win–win’ cases is significant. They also demonstrate how individual measures can provide significant reductions if carefully targeted economic support policies are applied. Finally, sensitivity analyses performed with respect to the discount rate applied indicate that it has a substantial impact on the economic performance of some measures and consequently on the magnitude of the ‘win–win’ potential associated to emissions reduction.     

European residential buildings and empirical assessment of the Hellenic building stock,energy consumption,emissions and potential energy savings

The existing building stock in European countries accounts for over 40% of final energy consumption in the European Union (EU) member states, of which residential use represents 63% of total energy consumption in the buildings sector. Consequently, an increase of building energy performance can constitute an important instrument in the efforts to alleviate the EU energy import dependency (currently at about 48%) and comply with the Kyoto Protocol to reduce carbon dioxide emissions. This is also in accordance to the European Directive (EPBD 2002/91/EC) on the energy performance of buildings, which is currently under consideration in all EU member states. This paper presents an overview of the EU residential building stock and focuses on the Hellenic buildings. It elaborates the methodology used to determine the priorities for energy conservation measures (ECMs) in Hellenic residential buildings to reduce the environmental impact from CO₂ emissions, through the implementation of a realistic and effective national action plan. A major obstacle that had to overcome was the need to make suitable assumptions for missing detailed primary data. Accordingly, a qualitative and quantitative assessment of scattered national data resulted to a realistic assessment of the existing residential building stock and energy consumption. This is the first time that this kind of aggregate data is presented on a national level. Different energy conservation scenarios and their impact on the reduction of CO₂ emissions were evaluated. Accordingly, the most effective ECMs are the insulation of external walls (33–60% energy savings), weather proofing of openings (16–21%), the installation of double-glazed windows (14–20%), the regular maintenance of central heating boilers (10–12%), and the installation of solar collectors for sanitary hot water production (50–80%).     

Discrimination of five Tunisian cultivars by Mid InfraRed spectroscopy combined with chemometric analyses of olive Olea europaea leaves

The high biodiversity of olive tree and the economic needs require tools for the correct classification and identification of the different cultivars. Simple and rapid methods are in increasing demand. In the present work, FT-MIR spectroscopy associated to chemometric treatment is proposed as a direct and rapid tool to discriminate cultivars according to their olive leaves, a persistent tissue the whole year. A set of 75 samples of olive leaves representative of five Tunisian cultivars (Chemlali, Sayali, Meski, Zarrazi and Chétoui) cultivated in the same geographical area was analysed. Discrimination between the five Tunisian cultivars was performed by the chemometric approach, principal component analysis (PCA), based on the FT-MIR spectral data provided by olive leaves. Furthermore, a correct classification (100%) of the five Tunisian cultivars was obtained by the Partial Least Square Discriminate Analysis (PLS-DA) method.