Synthesis and thermomechanical characterization of polyurethane elastomers extended with α,ω‐alkane diols

A series of polyurethane (PU) elastomers was prepared by the reaction of poly(?‐caprolactone) and 4,4′‐diphenylmethane diisocyanate, which was extended with a series of chain extenders (CEs) having 2–10 methylene units in their structure. The completion of the reaction was confirmed by Fourier transform infrared spectroscopy. The chemical structures of the synthesized PU samples were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, and the thermal properties were determined by thermogravimetric analysis, DSC, and dynamic mechanical thermal analysis techniques. The mechanical properties were also studied and are discussed. The thermogravimetric analysis and DSC analysis showed that CE length had a considerable effect on the thermal properties of the prepared samples. The dynamic mechanical thermal analysis and damping peaks were also affected by the number of methylene units in the CE length. The elastomer extended with 1,2‐ethane diol exhibited optimum thermal properties, whereas the elastomer based on 1,10‐decane diol displayed the worst thermal properties. Tensile strength and elongation at break decreased with increasing CE length, whereas hardness showed the opposite trend. The glass‐transition temperature moved toward lower temperatures with increasing CE length. The decrease in the glass‐transition temperature and tensile properties were interpreted in terms of decreasing hard segments and increasing chain flexibility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Alkaline fuel cells: contemporary advancement and limitations

ZeTek Power recently introduced mass manufacturable and cost effective alkaline fuel cells on the market. Today's research is focused on further improvement both in terms of performance increase and cost reduction. This research is classically performed using small (4 cm²) experimental electrodes in the half-cell configuration. This allows the primary electrochemical losses in an anode or cathode to be determined independently. Additional performance losses occur when one integrates large electrodes into a module of 24 cells and in a stack comprised of many modules. By comparing the performance of half-cell experiments to that of modules, these losses can be distinguished and addressed. The information thus obtained, both for the small electrodes and in up-scaling is vital if one is to identify the key areas in which improvement is possible and where to focus future research. Furthermore, the identification of the losses in a module and system allows us to predict the final performance from half-cell measurements of a new laboratory scale experimental electrode.     

Semi- and fully interpenetrating polymer networks based on polyurethane–polyacrylate systems. VI. Polyurethane–poly(methyl acrylate-co-ethyl acrylate) semi-1-interpenetrating polymer networks

Dynamic mechanical and longitudinal sonic velocity measurements have been made on a series of semi-1-IPNs in which the network component is a polyurethane and the linear constituent a copolymer of methyl acrylate and ethyl acrylate. Dynamic mechanical analysis reveals phase separation. The shifting of the polyurethane glass transition in both the tan δ? and the E″–temperature plots indicates that some mixing occurs. The longitudinal sonic velocity results indicate that the polyurethane is present as a continuous phase in all the materials investigated.     

Direct analysis of annealing of nodular crystals in isotactic polypropylene by atomic force microscopy, and its correlation with calorimetric data

The process of isothermal annealing of nodular monoclinic crystals of isotactic polypropylene (iPP) was analyzed by atomic force microscopy (AFM) and temperature-modulated differential scanning calorimetry (TMDSC). Initially nodular and mesomorphic domains were obtained by controlled melt-crystallization at high cooling rate. Subsequent heating triggers transition from mesomorphic to monoclinic structure, and melting of unstable nodules. Annealing allows re-crystallization, which is recognized by enlargement of domains from initially about 20 nm to about 35 and 55 nm after annealing at 393 and 433 K, respectively. Furthermore, the re-crystallization process is connected with a slight change of the aspect ratio of crystals. The isothermal re-crystallization of the liquid is superimposed by aggregation of crystals, to yield blocky, and string-like objects. The direct analysis of structure on isothermal annealing by AFM is for the first time compared with the isothermal decrease of the apparent specific heat capacity, or change of enthalpy, monitored by TMDSC. The apparent specific heat capacity decreases during annealing with an identical non-linear time dependence as the directly observed growth of the crystal size. Analysis of the annealing processes at different temperatures yields proportionality between the increase of the crystal size and the reduction of the apparent specific heat capacity.     

Low‐temperature synthesis of hierarchical structures of copper oxide and their superior biological activity

In this work, the authors report a facile low‐temperature wet‐chemical route to prepare morphology‐tailored hierarchical structures (HS) of copper oxide. The preparation of copper oxide collides was carried out using varying concentrations of copper acetate and a reducing agent at a constant temperature of 50°C. The prepared HS of CuO were characterised by powdered X‐rays diffraction that indicates phase pure having monoclinic structures. The morphology was further confirmed by field‐emission scanning electron microscope. It reveals a difference in shape and size of copper oxide HS by changing the concentration of reactants. In order to evaluate the effect of H₂ O₂ on CuO NPs, the prepared CuO are modified by treatment with H₂ O₂. In general trend, CuOH₂ O₂ collide showed enhanced protein kinase inhibition, antibacterial (maximum zone 16.34 mm against Staphylococcus aureus) and antifungal activities in comparison to unmodified CuO collides. These results reveal that CuO HS exhibit antimicrobial properties and can be used as a potential candidate in pharmaceutical industries.Inspec keywords: molecular biophysics, antibacterial activity, X‐ray diffraction, microorganisms, copper compounds, nanofabrication, nanoparticles, narrow band gap semiconductors, field emission scanning electron microscopy, enzymes, nanomedicine, particle size, semiconductor growthOther keywords: unmodified CuO collides, low‐temperature synthesis, morphology‐tailored hierarchical structures, copper acetate, reducing agent, monoclinic structures, copper oxide HS, CuO NPs, Staphylococcus aureus, biological activity, copper oxide, powdered X‐ray diffraction, field‐emission scanning electron microscopy, facile low‐temperature wet‐chemical method, protein kinase inhibition, antibacterial activity, antifungal activity, antimicrobial properties, pharmaceutical industries, temperature 50.0 degC, CuO     

In situ trapped high-density single metal atoms within graphene: Iron-containing hybrids as representatives for efficient oxygen reduction

Nano Research - Atomically dispersed catalysts have attracted attention in energy conversion applications because their efficiency and chemoselectivity for special catalysis are superior to those...     

Sulphur dioxide loadings over megacity Lahore (Pakistan) and adjoining region of Indo-Gangetic Basin

This article presents spatial and temporal variations of planetary boundary layer (PBL) sulphur dioxide (SO₂) over megacity Lahore and adjoining region, a typical representative area in the Indo-Gangetic Basin (IGB) largely influenced by transported volcanic SO₂ from Africa, Middle East, and southern Europe, by using data retrieved from satellite-based Ozone Monitoring Instrument (OMI) during October 2004–September 2015. We find a positive trend of 2.4% per year (slope 0.01 ± 0.005 with y-intercept 0.35 ± 0.03 Dobson Unit (DU), correlation coefficient r = 0.55 and 2-tailed p-value at 0.1) of OMI-SO₂ column with the average value of 0.4 ± 0.05 DU. Strong seasonality of OMI-SO₂ column is observed over the region linked with local meteorology, patterns of anthropogenic emissions, crop residue burning, and vegetation cover. There exists a seasonal high value in winter 0.56 ± 0.24 DU with a peak in December 0.67 ± 0.26 DU. The seasonal lowest value is observed to be 0.29 ± 0.11 DU in wet summer with minimum value in July 0.25 ± 0.06 DU. High growth rates of OMI-SO₂ column over the study region have been observed in January, June, October, and December ranging from 5.7% to 11.6% per year. Satellite data show elevated OMI-SO₂ columns in 2007, 2008, 2011, and 2012 largely contributed by trans-boundary volcanic SO₂. A detailed analysis of volcanic SO₂ transported from Africa and Middle East (Jabal Al-Tair, Dalaffilla, and Nabro volcanoes) over the study area is presented. Air mass trajectories suggest the presence of long-range transported volcanic SO₂ at high altitude levels over Lahore and IGB region during the volcanic episodes. The SO₂ enhancements in PBL during winter season are generally due to significant vertical downdraft of high-altitude volcanic SO₂. For the first time, we present significant influence of volcanic SO₂ from southern Europe (Mt. Etna volcano) reaching over the study area. Daily mean OMI-SO₂ levels up to 21.4, 10.0, 5.6, and 2.4 DU have been noticed due to the eruptions from Dalaffilla, Mt. Etna, Nabro, and Jabal Al-Tair volcanoes, respectively.     

Novel nano polymeric system containing biosynthesized core shell silver/silica nanoparticles for functionalization of cellulosic based material

An innovative strategy for functional finishing of cellulosic based materials is based on the incorporation of a thin layer of surface modifying systems (SMS) in the form of stimuli-sensitive nanogels containing combining metal nanoparticles and silica. The silver–silica core–shell nanoparticles (NPs) were synthesized by simple one pot chemical method. Silica/silver nanoparticles have been synthesized using low concentration of dextran as reducing and stabilizing agent and using ascorbic acid as antioxidant agent. The core–shell NPs were characterized for their structural, morphological, compositional and optical behaviour using X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. Stimuli-responsive nanogel was prepared by copolymerization of poly(N-isopropylacrylamide) with pullulan, results in a nanogel that is responsive to both temperature and pH, the nano-particulate hydrogel of poly-NiPAAm-pullulan copolymer was synthesized using surfactant-free emulsion method. The prepared nano-particles were used during the preparation steps of the pullulan nanogel to obtain nanogel/combining metal/silica NPs to produce a composite materials. The nanoparticle size in dry (collapsed) state is estimated at 250 nm by SEM and TEM, and effect of temperature and pH on gel-nanoparticles was investigated by DLS and UV–vis spectrophotometry. The incorporation of the nanoparticles to cellulosic material was done by a simple pad dry-cure procedure from aqueous nanoparticle dispersion that contained a cross-linking agent. This application method provided sufficient integrity to coating by maintaining the responsiveness of surface modifying system. The stimuli responsiveness of modified cellulosic materials has been confirmed in terms of regulating its water uptake in dependence of pH and temperature.     

MCMC data association and sparse factorization updating for real time multitarget tracking with merged and multiple measurements

In several multitarget tracking applications, a target may return more than one measurement per target and interacting targets may return multiple merged measurements between targets. Existing algorithms for tracking and data association, initially applied to radar tracking, do not adequately address these types of measurements. Here, we introduce a probabilistic model for interacting targets that addresses both types of measurements simultaneously. We provide an algorithm for approximate inference in this model using a Markov chain Monte Carlo (MCMC)-based auxiliary variable particle filter. We Rao-Blackwellize the Markov chain to eliminate sampling over the continuous state space of the targets. A major contribution of this work is the use of sparse least squares updating and downdating techniques, which significantly reduce the computational cost per iteration of the Markov chain. Also, when combined with a simple heuristic, they enable the algorithm to correctly focus computation on interacting targets. We include experimental results on a challenging simulation sequence. We test the accuracy of the algorithm using two sensor modalities, video, and laser range data. We also show the algorithm exhibits real time performance on a conventional PC     

Analysis of fading statistics in cellular mobile communication systems

Spatial channel models are often proposed for modeling the angular aspects of mobile radio channel in picocell, microcell, and macrocellular environments. These models are validated through comparison with available measurement results. The comparisons are usually based on the fitness of their pdfs of angle of arrival to the histogram of occurrences of the signals over an angular span, given in the measurement data. This paper presents a comparison of the notable scattering models with various spatial channel measurements. The paper suggests criteria for the comparative analysis of the previously proposed spatial channel models and measurements on the basis of their fading statistics. Quantitative analysis of the considered models and the field measurements is also presented using multipath shape factors i.e. angle spread, the angular constriction and direction of maximum fading. Based on the obtained shape factors, fading statistics like level crossing rates, average fade duration, auto-covariance and coherence distance are evaluated. Effect of increasing Doppler spread on the level crossing rates and average fade duration is also elaborated in detail.