Seven strategies for tolerating highly defective fabrication

This article we present an architecture that supports fine-grained sparing and resource matching. The base logic structure is a set of interconnected PLAs. The PLAs and their interconnections consist of large arrays of interchangeable nanowires, which serve as programmable product and sum terms and as programmable interconnect links. Each nanowire can have several defective programmable junctions. We can test nanowires for functionality and use only the subset that provides appropriate conductivity and electrical characteristics. We then perform a matching between nanowire junction programmability and application logic needs to use almost all the nanowires even though most of them have defective junctions. We employ seven high-level strategies to achieve this level of defect tolerance.     

Introducing realistic tire–pavement contact stresses into Pavement Analysis using Nonlinear Damage Approach (PANDA)

Realistic tire–pavement interface contact areas and stresses were incorporated into the Pavement Analysis using Nonlinear Damage Approach (PANDA) user interface (PUI). PANDA is a software library developed to simulate the complex thermo-viscoelastic–viscoplastic–viscodamage responses of the pavement to mechanical and environmental loads. The PUI is an interface generating a finite element representation of the pavement within PANDA. The application of realistic tire loading is necessary to calculate accurate pavement responses. The PUI incorporates a database of tire contact areas and stresses obtained from tire finite element simulations. The database includes tire interface characteristics with pavements for various applied loads, tire inflation pressures, vehicle speeds and scenarios of different rolling simulations. A parametric study was conducted to investigate the effect of simulations of tire contact stresses that match field measurements on viscoelastic and viscoplastic pavement responses. Pavement responses are greatly affected using realistic tire loading contact stresses and contact geometry as compared to simplified contact models. The impact on rutting and damage predictions cannot be ignored if reliable projections of pavement performance are to be made. This study confirms the importance of considering realistic three-dimensional contact stresses to design and analyse pavements.     

Enhanced electrocatalytic performance of Pt nanoparticles immobilized on novel electrospun PVA@Ni/NiO/Cu complex bio-nanofiber/chitosan based on Calotropis procera plant for methanol electro-oxidation

Bioinspired Ni/NiO nanocomposite was synthesized in the Calotropis procera wood and its size and structure were confirmed by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). The green and environmental friendly approach was performed for the preparation of copper nanocomplex (CC) under ultrasonic irradiation. Polyvinyl alcohol (PVA) nano-biofibers containing Ni/NiO nanocomposite and copper nanocomplex were obtained by electrospinning method. This novel bio nanocomposite was characterized by field-emission scanning electron microscope (FESEM), TEM, and atomic force microscopy (AFM) for further investigation. Novel Pt/PVA@Ni/NiO/Cu nanocomplex/chitosan (Pt/PVA@NOCC/CH) was synthesized and its catalytic performance was studied towards methanol electro-oxidation. Pt/PVA@NOCC/CH catalyst exhibits enhanced electrocatalytic performance towards methanol oxidation (MO), compared to Pt/PVA/CH and Pt/PVA@NOCC with respect to its better stability, larger electrochemically active surface area, enhanced mass activity, and improved resistance to poisoning. By and large, Pt/PVA@NOCC/CH is known as a promising electrocatalyst for fuel cells.     

MnO2 Nanoparticles as Efficient Oxidant for Ultrasound-Assisted Synthesis of 2-substituted Benzimidazoles under Mild Conditions

In this article, a novel method for synthesis of 2-substituted benzimidazoles using MnO₂ nanoparticles as a convenient oxidant agent in ethanol-water (1:1) as solvent under ultrasound irradiation was demonstrated. In this protocol the desired products were purely obtained in high yields. The main advantages of this research are: mild procedure, simplicity of method, easily work-up, high yields, and short reaction times. The MnO₂ nanoparticles were synthesized through a solid-state reaction route using simple strarting materials. Furthermore, their structure was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR).     

A Schiff base complex of Zn(II) as a neutral carrier for highly selective PVC membrane sensors for the sulfate ion

Novel polymeric membrane (PME) and coated graphite (CGE) sulfate-selective electrodes based on a recently synthesized Schiff base complex of Zn(II) were prepared. The electrodes reveal a Nernstian behavior over wide SO4(2-) ion concentration ranges (5.0 x 10(-5)-1.0 x 10(-1) M for PME and 1.0 x 10(-7)-1.0 x 10(-1) M for CGE) and very low detection limits (2.8 x 10(-5) M for PME and 8.5 x 10(-8) M for CGE). The potentiometric response is independent of the pH of the solution in the pH range 3.0-7.0. The electrodes manifest advantages of low resistance, very fast response, and, most importantly, good selectivities relative to a wide variety of other anions. In fact, the selectivity behavior of the proposed SO4(2) ion-selective electrodes shows a great improvement compared to the previously reported electrodes for sulfate ion. The electrodes can be used for at least 3 months without any appreciable divergence in potentials. The electrodes were used as an indicator electrode in the potentiometric titration of sulfate and barium ions and in the determination of iron in ferrous sulfate tablets.     

Antimicrobial Property,Antioxidant Capacity,and Cytotoxicity of Essential Oil from Cumin Produced in Iran

ABSTRACT: Cumin (Cuminum cyminum) is one of the commonly used spices in food preparations. It is also used in traditional medicine as a stimulant, a carminative, and an astringent. In this study, we characterized the antimicrobial, antioxidant, and cytotoxic activities of cumin. E. coli, S. aureus, and S. faecalis were sensitive to various oil dilutions. The total phenol content of the essential oil was estimated to be 33.43 μg GAE/mg of the oil. The oil showed higher antioxidant activity compared with that of BHT and BHA. The cumin essential oil exhibited a dose-dependent scavenging of DPPH radicals and 5.4 μg of the oil was sufficient to scavenge 50% of DPPH radicals/mL. At a concentration of 0.1 μL/mL, oil destructed Hela cells by 79%. The antioxidant activity of cumin essential oil might contribute to its cytotoxic activity. Acute and subchronic toxicity was studied in a 30-d oral toxicity study by administration to Wistar rats of the essential oil. A 17.38% decrease in WBCs count, and 25.77%, 14.24%, and 108.81% increase in hemoglobin concentration, hematocrit, and platelet count, respectively, were noted. LDL/HDL ratio was reduced to half, which adds to the nutritional effects of cumin. Thus, cumin with a high phenolic content and good antioxidant activity can be supplemented for both nutritional purposes and preservation of foods.     

Change in optic disk topography after trabeculectomy

PURPOSE: To investigate the relationship between optic disk topography and intraocular pressure before and after trabeculectomy with confocal scanning laser ophthalmoscopy. METHODS: The eyes of 49 consecutive patients undergoing trabeculectomy at a university-based glaucoma practice underwent preoperative and postoperative imaging using a confocal scanning laser ophthalmoscope (Heidelberg Retina Tomograph). Three images of one eye of each patient were obtained with a 15-degree field of view. Preoperative images were obtained approximately 2 months before surgery (mean +/- SD, 2.4 +/- 1.6 months). Postoperative images were obtained at least 3 months after surgery (mean, 4.5 +/- 2.6 months). RESULTS: Mean preoperative intraocular pressure, postoperative intraocular pressure, and percent change in intraocular pressure respectively were 23.1 +/- 6.8 mm Hg, 12.7 +/- 7.1 mm Hg, and 43.8% +/- 29.9%. A significant association (P < .01) was found between percent decrease in intraocular pressure and decreases in cup area, cup volume, and cup/disk area ratio as well as between percent decrease in intraocular pressure and increases in rim area, rim volume, mean height contour, retinal cross-section area, and height in contour. Between 11.7% and 31.2% of the variability (R2) in these parameters was explained by the percent change in intraocular pressure. Topography changes were more strongly associated with percent change than with mean change in intraocular pressure. We found no association between percent decrease in intraocular pressure and reference plane height or maximum cup depth. CONCLUSIONS: Changes in optic nerve topography were associated with reduction in intraocular pressure after trabeculectomy.