QoS constrained resource allocation to secondary users in cognitive radio networks

In this paper, we consider a multi-channel cognitive radio network (CRN) where multiple secondary users share a single channel and multiple channels are simultaneously used by a single secondary user (SU) to satisfy their rate requirements. In such an environment, we attempt to evaluate the optimal power and rate distribution choices that each secondary user has to make in order to maintain their quality of service (QoS). Our measures for QoS include signal to interference plus noise ratio (SINR)/bit error rate (BER) and minimum rate requirement. We propose two centralized optimization frameworks in order to solve for the optimal resource management strategies. In the first framework, we determine the minimum transmit power that SUs should employ in order to maintain a certain SINR and use that result to calculate the optimal rate allocation strategy across channels. In the second framework, both transmit power and rate per channel are simultaneously optimized with the help of a bi-objective problem formulation. Unlike prior efforts, we transform the BER constraint into a convex constraint in order to guarantee optimality of the resulting solutions. Simulation results demonstrate that in both frameworks, optimal transmit power follows “reverse water filling” process and rate allocation follows SINR. We also observe that, due to the ability to adapt both power and rate simultaneously to attain a certain BER, the joint optimization framework results in a lower total transmit power than the two-stage approach.     

Internal and external factors of competitiveness shaping the future of wooden multistory construction in Finland and Sweden

In transitioning to a renewable material-based bio economy, growing public and industry interest is apparent for using wooden multistory construction (WMC) as a sustainable urban housing solution in Europe, but its business implications are not well understood. In our study, we evaluate, which internal and external factors of competitiveness are shaping the future of WMC, especially in the context of Finland and Sweden. Based on a multi-level perspective of socio-technical transitions, we conducted a three-stage dissensus-based Delphi study. The identified internal and external factors affecting the future competitiveness of the WMC business emphasize the importance of skilled architects and builders and the role of standardized building systems. Based on our results, the key aspects influencing the future competitiveness of WMC in the region are related to the development of technical infrastructure and project-based business networks, while additional changes in regulatory framework are perceived as less important. We conclude that towards 2030, the strong cognitive rules founded in the concrete-based building culture in these countries is likely to inhibit the dynamics of the socio-technical regime level. A change is also needed in the WMC business culture towards more open cross-sectoral collaboration and new business networks between different-sized players.     

Encapsulation by spray drying of bioactive components, physicochemical and morphological properties from purple sweet potato

Purple-fleshed sweet potato flour could be used to enhance the colour, flavour and nutrients in food products. Thus, the investigation was to produce encapsulated flours from purple-fleshed sweet potato by spray drying using combinations of various levels of ascorbic acid (5 g kg⁻¹ and 10 g kg⁻¹) and maltodextrin (30 g kg⁻¹ and 100 g kg⁻¹) and to evaluate their effects on bioactive components, physicochemical and morphological properties. Encapsulated flours had higher total phenolic content, antioxidant capacity and water solubility index than non-encapsulated flour. There were no significant differences in anthocyanin content between encapsulated and non-encapsulated flours. However, water absorption index and flavonoids content of encapsulated flours depended on concentrations of ascorbic acid and maltodextrin. In addition, the high concentrations of ascorbic acid and maltodextrin encapsulated flours had higher glass transition temperature as compared to that of lower concentrations. In respect to morphology, the particles of encapsulated flours with high concentration of ascorbic acid and maltodextrin were more aggregated than those encapsulated with lower concentrations. Therefore, flours encapsulated with 10 g kg⁻¹ ascorbic acid and 30 g kg⁻¹ maltodextrin could be used to enhance the antioxidant activities of functional food ingredients.     

Safety assessment of Lactobacillus strains: presence of putative risk factors in faecal, blood and probiotic isolates

The widespread use of immunosuppressive therapy and antimicrobial agents as well as novel probiotics without a long history of safe use has increased requirements for safety assessment of probiotic lactobacilli. In this study 44 faecal, 52 blood and 15 probiotic isolates (including 3 dairy strains) of Lactobacillus were assayed for their adhesion properties to extracellular matrix proteins and mucus, hemolysis, ability to avoid the induction of respiratory burst in peripheral blood mononucleocytes (PMN) and resistance to human serum. Among tested strains adhesion to collagen, fibrinogen and mucus was isolate-specific and no statistically significant differences were obtained between faecal, blood and probiotic isolates. However, blood isolates showed a trend for higher adhesion to mucus than probiotic strains (P=0.07). Probiotic strains induced lower respiratory burst in PMN when compared to the blood isolates (P<0.05). Moreover, there was a positive correlation between adhesion to collagen and induction of respiratory burst for faecal isolates (P<0.05). In the determination of serum resistance, probiotic strains showed a trend for lower sensitivity to human serum-mediated killing when compared to the faecal isolates (P=0.07). None of the measurable virulence factors were found to be present at statistically higher level in clinical blood isolates when compared to faecal and/or probiotic isolates indicating that these factors do not cause risk when safety of probiotics is considered. However, the significance of adhesion to mucus, low induction of respiratory burst in PMN and resistance to human serum-mediated killing may need further evaluation in experimental animal models and in epidemiological data.     

Dietary fibre components,antioxidant activities and hydration properties of ripe persimmon (Diospyros kaki L. cv. Daebong) peel powders as affected by different washing treatments

Dietary fibre components, hydration properties and antioxidant activities such as 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) radical scavenging, reducing power, metal chelating and 2,2′‐azino‐bis,3‐ethyl‐benzo‐thiazoline‐6‐sulphonic acid (ABTS) radical scavenging activities of persimmon peel powders using different washing treatments (tap water at 20 °C and hot water) were investigated. Peel powder obtained from hot water‐washed peels (74.95 g per 100 g) had higher dietary fibre content than tap water‐washed (65.50 g per 100 g) and unwashed (60.99 g per 100 g) peels. The higher content of total phenolic and ascorbic acid were found in peel powder obtained from unwashed peels, whereas washed peels had more β‐carotene content. The EC₅₀ values of scavenging DPPH and ABTS radical for peel powders obtained from unwashed, tap water‐washed and hot water‐washed peels were 75.44, 142.18 and 110.17 μg mL^?1 respectively and 5.31, 5.34 and 5.39 μg mL^?1 respectively. Therefore, hot water washing is recommended to obtain better quality products from persimmon peel for use as a fibre supplement.     

Drought Stress Alters the Concentration of Wood Terpenoids in Scots Pine and Norway Spruce Seedlings

Drought is known to have an impact on the resistance of conifers to various pests, for example, by affecting resin flow in trees. Little is known, however, about the quantitative and qualitative changes in resin when trees are growing in low moisture conditions. We exposed Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) seedlings to medium and severe drought stress for two growing seasons and analyzed the monoterpenes and resin acids in the main stem wood after two years of treatment. In addition to secondary chemistry, we measured the level of nutrients in the needles and the growth response of seedlings. After the first year of treatment, drought stress did not affect the growth of seedlings, but in the second year, shoot growth was retarded, especially in Scots pine. In both conifer species, severe drought increased the concentrations of several individual monoterpenes and resin acids. Total monoterpenes and resin acids were 39 and 32% higher in severe drought-treated Scots pine seedlings than in the controls, and 35 and 45% higher in Norway spruce seedlings. In Scots pine needles, the concentrations of nitrogen and phosphorus increased, while magnesium and calcium decreased compared to controls. In Norway spruce needles, nutrient concentrations were not affected. The results suggest that drought stress substantially affects both the growth of conifers and the chemical quality of the wood. We discuss the potential trade-off in growth and defense of small conifer seedlings.     

Concurrent engineering: A compromising approach to develop a feasible and customer-pleasing product

To develop a customer-pleasing and economically and technically feasible product, it is necessary to utilize the best possible knowledge of the market, the customers, the core product technology, and the cost implications of design alternatives. It requires the concurrent involvement of team members from merchandizing, product development, and purchasing and production-engineering departments of the enterprise. The merchandizing department identifies customer needs however, considering only customers’ requirements, without technical information it is not possible to develop a feasible product. Conversely, the function-oriented designers in the product development department determine the subsystems’ weight, which are technically feasible but may ignore the qualitative issues desired by the customers. To identify the economic feasibility of the product, the purchasing and production-engineering departments calculate the estimated cost by evaluating the cost implications of the design alternatives. Therefore, to produce an economically and technically feasible product with customer pleasing quality, a trade-off among these three sets of weights is essential. Here, we propose an optimization model that assimilates three sets of weights of the subsystems to a final one. The resultant set of weights will represent the effects of concurrent cooperation among merchandizing, product development, purchasing and production-engineering departments of the enterprise.     

Catalytic Oxidation of Dichloromethane and Perchloroethylene: Laboratory and Industrial Scale Studies

Development of a reliable laboratory scale test for the design of industrial catalysts is crucial. In this article, different laboratory-scale tests were compared with an industrial scale CVOCs treatment. With dichloromethane (DCM) the laboratory scale test results corresponded well to the industrial scale oxidation results. However, the perchloroethylene (PCE) conversions measured in industry were always higher than what was achieved in the laboratory scale indicating that the industrial scale catalytic incinerator operating in transient conditions is highly beneficial in PCE oxidation. It was clearly shown that in order to design high-quality laboratory scale experiments, information on complete composition and total concentration of the emission is needed but also different types of catalytic tests need to be used depending on the industrial reactor. In addition, the catalysts’ performance in an industrial VOC abatement unit was examined as the oxidation efficiencies of DCM, PCE and other hydrocarbons (OHC) were compared after 3, 10 and 23 months of operation. After 23 months and 13,065 operating hours, no significant decrease in the activity of the catalysts was observed showing that the used noble metal catalysts are highly resistant towards these demanding conditions.     

Efficacy and environmental acceptability of two ballast water treatment chemicals and an alkylamine based-biocide

Ship's ballast waters transport large numbers of organisms which may become invasive in coastal regions. One option to address this problem is the use of biocides as ballast water treatment (BWT). Efficacy and environmental acceptability of three commercial active substances (the BWT biocides Peraclean^® Ocean and Seakleen^®, and alkylamine-based biocide Mexel^® 432/336) were tested against three bacteria species, two vegetative microalgae and one zooplanktonic larva, in 10 and 30 Practical Salinity Unit (PSU) waters. In both salinities, PeraClean^® Ocean was the most effective biocide against bacteria causing > 90% mortality at 20 mg/l, compared with 50 mg/l for Mexel^® 432/336 and > 500 mg/l for Seakleen^®. Regarding zooplankton, Seakleen^® was the most effective chemical causing 90% mortality in 24 h at concentrations < 6 mg/l (LC90_24 h) in both salinities, compared with 23 and 26 mg/l for Mexel^® 432/336 and 370 and 480 mg/l for PeraClean^® Ocean in 10 and 30 PSU, respectively. Similar pattern of efficacy was obtained for microalgae in 30 PSU: effective concentrations inducing 50% growth inhibition in 4 days were ≤ 1.6 mg/l for Seakleen^®, ≤ 10.1 mg/l for Mexel^® 432/336 and ≤ 30.9 mg/l for PeraClean^® Ocean. Our work highlighted that treated waters displayed residual toxicity after 24 h still inducing mortality depending on the organism and biocide. However Mexel^® 432/336 is the only biocide which had no impact on oyster larvae development at effective concentration. Altogether our data showed that Mexel^® 432/336 was the only biocide displaying a broad spectrum efficacy in concentrations < 50 mg/l and not toxic for oyster larvae development at this concentration. However residual toxicity of treated waters for any organism should be taken into account in BWT systems utilising biocides.     

A microbiological screening method for the indication of irradiation of frozen poultry meat

A microbiological screening method for the detection of irradiation of frozen poultry meat was developed on the basis of the combined use of total cell count by the direct epifluorescent filter technique (DEFT) and viable cell count by the aerobic plate count method (APC). Samples of ground, deboned poultry leg were irradiated or not with dose levels of 3, 5 and 7 kGy using an electron beam accelerator. All samples were frozen before the irradiation treatment. The average values of the differences between DEFT and APC counts in control samples and those irradiated with doses of 3, 5 and 7 kGy were 1.14 log units for control samples, and 3.16, 3.68 and 3.79 log units for the irradiated samples. A difference of at least 2 log units can therefore be considered as a limit value indicating probable irradiation treatment necessitating further investigations.

---

Anwendung eines mikrobiologischen Unterscheidungsverfahrens zum Nachweis der Bestrahlung von gefrorenem Hühnerfleisch

Zusammenfassung Es wurde ein mikrobiologisches Verfahren zum Nachweis der Bestrahlung von tiefgefrorenem Hühnerfleisch auf der Basis kombinierten Einsatzes direkter Epifluoreszenzfiltertechnik (DEFT) und Kolonieauszählung (APC) entwickelt. Die Proben - knochenfreie, zerkleinerte Hühnerschenkel - waren entweder unbestrahlt oder mit einem Elektronenbeschleuninger mit Dosen von 3, 5 bzw. 7 kGy bestrahlt worden. Alle Proben waren vor der Bestrahlung eingefroren worden. Die Mittelwerte der Differenzen zwischen den DEFT- und den APC-Ergebnissen betrugen bei den unbestrahlten Proben 1,14 logarithmische Einheiten und bei den mit 3, 5 bzw. 7 kGy bestrahlten Proben 3,16, 3,68 bzw. 3,79 logarithmische Einheiten. Die Differenz von wenigstens zwei logarithmischen Einheiten kann als Grenze für die Möglichkeit eines Nachweises eventueller Bestrahlung betrachtet werden und macht weitere Untersuchungen erforderlich.