Strengthening of Preloaded RC Beams Using Hybrid Carbon Sheets

Reinforced concrete (RC) beams subject to service loads of 40 or 60% of steel yielding were strengthened using hybrid continuous carbon fiber sheets. The hybrid systems were made of high-strength and high-modulus carbon sheets, and compared with systems using only high-strength carbon. It was found that the use of high-modulus carbon sheets in hybrid systems could increase the yielding load, the flexural stiffness, the postyielding ductility, and reduce the crack opening in concrete. The slope changes on load-deflection curves at steel yielding are not noticeable in hybrid systems. The tensile strains developed in hybrid sheets after the fracture of high-modulus carbon are higher in magnitude and distributed in a larger area, leading to an ultimate carbon fracture with concrete crushing. These unique features are attributed to the high stiffness and low ultimate tensile strain of the high-modulus carbon fibers which stiffen the structures, avoid or delay the fiber-reinforced polymer debonding, and facilitate the deformability during their subsequent breakdown.     

10 Gbit/s optical BPSK homodyne detection experiment with solitaryDFB laser diodes

Solitary DFB laser diodes with 174 kHz beat linewidth are applied to a 10 Gbit/s optical BPSK homodyne detection system for the first time: a sensitivity of -38.9 dBm was achieved. A three-electrode laser forms the local oscillator and is modulated with a partial push-pull scheme to improve its frequency response     

Heavy oil sorption and recovery by using carbon fiber felts

On fibrous carbon materials, including activated carbon fibers, sorption capacity for heavy oils, less viscous A-grade and more viscous C-grade, was determined. Sorption capacity depended strongly on their bulk density; the correlation was the same as that found previously on exfoliated graphite and carbonized fir fibers. On carbon fiber felts, excellent recycling performance was observed, though sorption capacity was not so high as on exfoliated graphite and carbonized fir fibers. By filtration under suction, about 90% of sorbed A-grade heavy oil could be recovered and no decrease in sorption capacity was detected even after eight cycles. By washing with solvents, n-hexane for A- and C-grade oils and A-grade oil for C-grade oil, almost 100% recovery with no marked reduction in sorption capacity was found for each cycle. For the felts of PAN-based carbon fibers, rather severe operations for oil recovery, centrifugation and squeezing with twisting, could be applied without pronounced decreases in sorption capacity and recovery ratio.     

Optimization of facial skin temperature-based anomaly detection model considering diurnal variation

Artificial Life and Robotics - The amount of blood under the surface of skin is controlled by the autonomic nervous system and directly influences the facial skin temperature. Classification models...     

Optimally designing caches to reduce P2P traffic

Traffic caused by P2P services dominates a large part of traffic on the Internet and imposes significant loads on the Internet, so reducing P2P traffic within networks is an important issue for ISPs. In particular, a huge amount of traffic is transferred within backbone networks; therefore reducing P2P traffic is important for transit ISPs to improve the efficiency of network resource usage and reduce network capital cost. To reduce P2P traffic, it is effective for ISPs to implement cache devices at some router ports and reduce the hop length of P2P flows by delivering the required content from caches. However, the design problem of cache locations and capacities has not been well investigated, although the effect of caches strongly depends on the cache locations and capacities. We propose an optimum design method of cache capacity and location for minimizing the total amount of P2P traffic based on dynamic programming, assuming that transit ISPs provide caches at transit links to access ISP networks. We apply the proposed design method to 31 actual ISP backbone networks and investigate the main factors determining cache efficiency. We also analyze the property of network structure in which deploying caches are effective in reducing P2P traffic for transit ISPs. We show that transit ISPs can reduce the P2P traffic within their networks by about 50-85% by optimally designing caches at the transit links to the lower networks.     

Preconditioned iterative solver on the coarsest level of a multi-grid method for high frequency time harmonic electromagnetic field analyses

A multi-grid method is one of the most powerful linear solvers for finite element electromagnetic field analysis. However, as the discretized model has recently been enlarged, a solution process for a linear system arising on the coarsest level tends to be problematic in a complete multi-grid solution process. Whereas a linear system on the coarsest level is generally solved by a direct solver, we solve it here by means of an iterative solver to reduce the memory requirements. Since a conventional preconditioning technique is not effective for such a linear system, we introduce preconditioning techniques based on Arnold, Falk, and Winther’s and on Hiptmair’s smoothers. Numerical tests show that the newly installed preconditioning technique greatly improves the convergence rate.     

Plan for first phase of safety demonstration tests of the High Temperature Engineering Test Reactor (HTTR)

Safety demonstration tests using the High Temperature Engineering Test Reactor (HTTR) will be conducted for the purpose of demonstrating inherent safety features of High Temperature Gas-cooled Reactors (HTGRs) as well as providing the core and plant transient data for validation of HTGR safety analysis codes. The first phase safety demonstration test items include the reactivity insertion test and the coolant flow reduction test. In the reactivity insertion test, which is the control rod withdrawal test, one pair out of 16 pairs of control rods is withdrawn, simulating a reactivity insertion event. The coolant flow reduction test consists of the partial loss of coolant flow test and the gas circulators trip test. In the partial loss of coolant flow test, primary coolant flow rate is slightly reduced by control system. In the gas circulators trip test one and two out of three gas circulators are run down, simulating coolant flow reduction events. The gas circulators trip tests, in which position of control rods are kept unchanged, are simulation tests of anticipated transients without scram (ATWS).     

Water permeation properties of SiO2-RSiO3/2 (R = methyl,vinyl, phenyl) thin films prepared by the sol-gel method on nylon-6 substrate

Nylon-6 substrates were coated with SiO₂-RSiO_3/2 (R = methyl, vinyl, phenyl) thin films by the sol-gel method, and their water permeability was evaluated Tetraethoxysilane (TEOS) and trifunctional alkoxides such as methyltriethoxysilane (MTES), vinyltriethoxysilane (VTES), and phenyltriethoxysilane (PhTES) were used as starting materials. Water permeability coefficients of the nylon-6 substrates coated with these SiO₂-RSiO_3/2 thin films were increased with an increase in the content of these trialkoxysilanes in the films. The water permeability coefficients of these coated nylon-6 substrates were smaller in the order of the systems TEOS-PhTES < TEOS-VTES < TEOS-MTES in the relatively low content of the trialkoxysilanes. © 1996 John Wiley & Sons, Inc.     

Speciation of selenium in selenium-enriched seeds,buckwheat (<Emphasis Type="Italic">Fagopyrum esculentum</Emphasis> Moench) and quinoa (<Emphasis Type="Italic">Chenopodium quinoa</Emphasis> Willdenow)

Buckwheat (Fagopyrum esculentum Moench) and quinoa (Chenopodium quinoa Willdenow) are widely used as food ingredients. The nutritional characteristics of these plants, i.e., high contents of proteins and amino acids suggest that selenium (Se) is preserved as selenoamino acid derivatives, in particular, selenomethionine (SeMet) in proteins, similar to selenized yeast. Therefore, buckwheat and quinoa are expected to be a good nutritional source of Se. Selenized buckwheat and quinoa were cultivated on Se-fortified soil using sparingly soluble Se salts, such as barium selenate and barium selenite. Se concentration in the edible parts of these plants was determined, and Se extraction efficiency with enzyme or alkali was evaluated. In addition, the chemical species of Se in the low molecular weight fraction of these plants were determined by HPLC-ICP-MS. Total Se concentrations in the edible parts of selenized buckwheat and quinoa were 170.4 ± 2.9 μg/g and 102.7 ± 2.4 μg/g wet weight, respectively. Thus, these selenized seeds were found to be Se accumulators. The results indicate that Se in selenized buckwheat exists mainly as SeMet, while Se in selenized quinoa exists not only as SeMet but also as selenate (Se(VI)) and non-protein forms.