Tunable colors and conductivity by electroless growth of Cu/Cu2O particles on sol-gel modified cellulose

Nano Research - Development of colored surfaces by formation of nano-structured aggregates is a widely used strategy in nature to color lightweight structures (e.g. butterflies) without the use of...     

Lignin from Annual Plants as Raw Material Source for Flavors and Basic Chemicals

The enzymatic conversion of lignins, possibly in combination with electrochemical oxidation, makes aromatics such as syringol, guaiacol, vanillin and catechol available in the qualities required by the fragrance industry. The lignins were obtained by soda digestion from wheat straw and Miscanthus, characterized and then converted with laccases. The overall yield amounted up to 9 wt % with a product spectrum confined to four substances. Catechol was the major product, with a fraction of ≈75 %. It can easily be isolated by extraction with acetone.     

Tetrahydroindoles as Multipurpose Screening Compounds and Novel Sirtuin Inhibitors

Indoles are privileged structures in medicinal and bioorganic chemistry that are particularly well suited to serve as platforms for diversity. Among many other therapeutic areas, the indole scaffold has been used to design aromatic compounds useful to interfere with enzymes engaged in the regulation of substrate acylation status, such as sirtuins. However, the planarity of the indole ring is not necessarily optimal for all target enzymes, especially when functionalization with aromatic side chains is required. Replacement of flat scaffolds by nonplanar molecular cores dominated by sp³ hybridization is a common strategy to avoid the disadvantages associated with poor solubility and high promiscuity, while covering less-well-explored areas of chemical space. Thus, we synthesized fragment-like tetrahydroindoles suitable for fragment-based drug discovery as well as a well-characterized small library intended as multipurpose screening compounds. For proof of principle, these compounds were screened against sirtuins 1–3, enzymes known to be addressable by indoles. We found that 2,6,6-trimethyl-4-oxo-4,5,6,7-tetrahydro-1H-indole-3-carboxamides are potent and selective SIRT2 inhibitors. Compound 16 t displayed an IC₅₀ value of 0.98 μm and could serve as exquisite starting point for hit-to-lead profiling.     

Technology-transfer analysis of the materials research program “Matfo”

The commercial success of the German Federal Ministry's materials research program “Mafto” (1985–1994) was recently evaluated to determine the effectiveness of the direct-funding model in supporting innovative industrial research. Based on the results of a questionnaire, where a 97% return rate was achieved, it was found that the results obtained in 27% of the projects have already been commercialized to some degree, for 26% of the projects a commercialization of the results is planned but has not yet taken place, and for 54% of the projects no commercialization is planned. This study included only projects where at least four years had elapsed since project completion. The reasons why scientifically and technically successfully projects were not commercialized were also surveyed.     

Recrystallization/precipitation behaviour in microalloyed steels

Microalloyed high-strength low-alloy (HSLA) steels contain additions of Nb, V, Ti, or in combination, in amounts of 0.01 to 0.1 weight percent to improve mechanical properties, which are strongly dependent on the thermomechanical interaction taking place in the course of rolling mill processes. The recrystallizatian of hat-twisted austenite has been investigated in a cylindrical specimen (f 6×50 mm) machined from hat rolled plates of 0,052 wt % Niobium microalloyed steel. Continuous and interrupted torsion test were carried out in the temperature range 1123 K to 1173 K after a solution treatment of 1.5 minutes at 1423 K and torque-twist data were analysed. The various methods were discussed for obtaining results from torsion tests. The effect of precipitation kinetics was appreciated by way of connection t_p/t_p(red), where t_p is the experimental measured time for the peak stress and t_p(red) is the newly defined reduced time. The softening ratio X and time t_0.05R for start of static recrystallization were established.

The correlation between precipitation and recrystallization is presented as a graphs for chosen requirements (temperature of austenitization, carbon and niobium content and strain rate). If temperature goes below 850°C, the restoration processes are hardly suppressed, both are limited by diffusion and Nb(CN) precipitation, which are extended dynamically in the range of strains rates 10⁻² to 1 s⁻¹.

In the present paper, an attempt is made to derive the PRTT diagram and to define all mathematical equations for describing recrystallization times t_0.05R, t_0.5R, t_0.95R and t_0.05P for the start of precipitation. In real metal forming processes such as the hot rolling of plates or strips the knowledge of these parameters and results is extremely important for the the correct microstructure and sheet quality to be obtained.     

Magnetic force microscopy studies on the magnetic ordering in organic materials induced by high-energy proton irradiation

In this study, ferromagnetic microstructures in highly oriented pyrolytic graphite and superparamagnetic spots in polyimide foils were created by 2.25 MeV proton microbeam irradiation and characterized using atomic and magnetic force microscopy. For this purpose, graphite samples were irradiated with cross-like patterns of 15 μm × 15 μm size using ion fluences in the range of (0.003–2.5) × 10¹⁸ cm⁻². The irradiated crosses showed strong magnetic signals and a complex domain structure in the magnetic images depending on the geometrical dimensions of the crosses. Furthermore, polyimide foils were irradiated with microspots and fluences in the range of (0.016–3.1) × 10¹⁹ cm⁻². Magnetic force microscopy shows very strong phase shifts in these irradiated areas.     

Decision support for AIDS control programmes in Eastern Africa

The Acquired Immune Deficiency Syndrome (AIDS) constitutes the worst hazard to health care systems in Eastern Africa. Misallocation of scarce resources of AIDS Control Programmes will unavoidably lead to additional infections and casualties. The following paper discusses a system dynamics model which allows to assess the impact of different interventions on a pattern population in Eastern Africa. It becomes obvious that short- and long-term consequences of these programmes differ significantly. The optimal allocation of resources, therefore, is highly complex and calls for decision support systems to sustain AIDS control programmes.     

Effects of selenium and vitamin E on incidence of retained placenta

In a series of experiments over 3 yr, relatively low doses of selenium and vitamin E were injected intramuscularly 3 wk prepartum to pregnant Israeli-Holstein dairy cows in a high-producing herd (9000 kg milk/yr) with a history of retained placenta in 17% of the primiparous and 28% of the multiparous animals, as recorded for the 12 mo preceding the study. Selenium ranged from .035 to .109 ppm in the prepartum diet and from .160 to .200 ppm in the postpartum diet. Doses of selenium ranging from 2.3 to 23.0 mg reduced the incidence of retained placenta in 186 primiparous and in 428 multiparous to 7 and 15%, which was half of that of controls. Low doses of selenium (2.3 to 4.6 mg) tended to be more effective than higher ones. Selenium alone was at least as effective as a combination of selenium and vitamin E. Dosage, timing, mechanism, and interactions of selenium with other factors in reducing the incidence of retained placenta need clarification.     

Associated ulcerative colitis, sclerosing cholangitis, and insulin-dependent diabetes mellitus

We report two young men with clinical and laboratory evidence of macroscopic ulcerative colitis, sclerosing cholangitis, and insulin-dependent diabetes mellitus. The first patient presented at age 15 with vomiting, abdominal pain, weight loss, and abnormal liver function test results. Liver biopsy and endoscopic retrograde cholangiopancreatography (ERCP) demonstrated sclerosing cholangitis. Colonoscopy with biopsy revealed ulcerative colitis which responded to sulfasalazine. Diabetes occurred at age 18 and insulin therapy was begun. The second patient was 19 at presentation with diarrhea, hematochezia, and weight loss. Proctosigmoidoscopy revealed ulcerative colitis, and sulfasalazine led to clinical remission. Three months later he developed diabetes requiring insulin therapy. At age 28, he developed elevated alkaline phosphatase, and ERCP revealed sclerosing cholangitis. At age 37 he expired from adenocarcinoma that metastasized to the liver. Literature review revealed only one possible case report of this association with microscopic asymptomatic ulcerative colitis in that patient. Statistical analysis suggests that this association is real rather than a chance occurrence. An autoimmune process may be involved and a specific histocompatibility locus antigen (HLA) type may exert a regulatory influence.     

Lightweight coarse-grained coordination: a scalable system-level approach

In this paper, our solution to the problem of modelling functionally complex communication systems at the application level, based on lightweight coordination, is extended to seamlessly capture system-level testing as well. This extension could be realized simply by self-application: the bulk of the work for integrating system-level testing into our development environment, the ABC, concerned domain modelling, which can be done using the ABC. Therefore, the extension of the ABC to cover system-level testing was merely an application development on the basis of the ABC, illustrated here in the domain of Computer Telephony Integration. Here the adoption of a coarse-grained approach to test design, which is central to the scalability of the overall testing environment, is the enabling aspect for system-level test automation. Together with our lightweight coordination approach this induces an understandable modelling paradigm of system-wide test cases that is adequate for the needs and requirements of industrial test engineers. In particular, it enables test engineers to graphically design complex test cases that, in addition, can even be automatically checked for their intended purposes via model checking.