Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

Synthesis and characterization of conducting copolymers from aniline and o‐anisidine in HCl solutions

Conducting poly(aniline‐co‐o‐anisidine) (PAS) films with different ratios of aniline units in the polymer chain were prepared by oxidative polymerization of different molar ratios of aniline and o‐anisidine in 1 M HCl using cyclic voltammetry. Due to the much higher reactivity of o‐anisidine, the structure and properties of PASs were found to be dominated by the o‐anisidine units. The polymerization of poly‐o‐anisidine and PASs followed zero‐order kinetics with respect to formation of the polymer (film thickness) and the autocatalytic polymerization of aniline was completely inhibited. In contrast to polyaniline, a decrease in the polymerization temperature was found to increase the amount of copolymer formed and its redox charge. The presence of aniline units in PASs led to a pronounced increase in the molecular weight and conductivity, and a decrease in the solubility in organic solvents. Repetitive charging/discharging cycles showed that PASs resist degradation more than polyaniline. Copyright © 2003 Society of Chemical Industry     

High brachial artery bifurcation: a report of 2 cases

High division of the brachial artery was observed in two cadavers, during routine dissection of upper extremities. In the first case, the brachial artery of the right upper extremity was divided into its two terminal branches immediately after passing between the lateral and medial roots of the median nerve and just below the origin of the profunda brachii artery. The lateral branch was the radial artery, located in the space normally occupied by the brachial artery and the medial one was the ulnar artery. In the second case, the brachial artery was divided into its two terminal branches just below the origin of the profunda brachii artery. Accurate knowledge of the relationships and course of these major arterial conduits and particularly of their variational patterns, is of considerable practical importance in the conduct of reperative surgery in the arm, forearm and hand.     

Flexible, dry-released process for aluminum electrostatic actuators

We present an all-aluminum MEMS process (Al-MEMS) for the fabrication of large-gap electrostatic actuators with process steps that are compatible with the future use of underlying, pre-fabricated CMOS control circuitry. The process is purely additive above the substrate as opposed to processes that depend on etching pits into the silicon, and thereby permits a high degree of design freedom. Multilayer aluminum metallization is used with organic sacrificial layers to build up the actuator structures. Oxygen-based dry etching is used to remove the sacrificial layers. While this approach has been previously used by other investigators to fabricate optical modulators and displays, the specific process presented herein has been optimized for driving mechanical actuators with relatively large travels. The process is also intended to provide flexibility for design and future enhancements. For example, the gap height between the actuator and the underlying electrode(s) can be set using an adjustable polyimide sacrificial layer and aluminum “post” deposition step. Several Al-MEMS electrostatic structures designed for use as mechanical actuators are presented as well as some measured actuation characteristics     

Slow eroding biodegradable multiblock poloxamer copolymers

Biodegradable multiblock poloxamers (BMPs) with gel duration of 8 h to several weeks were prepared by varying their molecular weights from 4000 to 40 000 g mol^?1. The molecular weight of the BMP was controlled by changing the poloxamer to coupling agent ratio. Assuming a micelle packing model of the BMP gel, as in the case of a poloxamer gel, the micelle properties and critical gel concentration of BMPs were investigated on the basis of the scaling concept. The findings suggest that the control of molecular weight by hydrolyzable groups can be a facile approach to optimize the gel properties for biomedical applications. Copyright © 2005 Society of Chemical Industry     

Design of software systems based on axiomatic design

The ability to utilize fully automated flexible manufacturing systems (FMS) or develop reliable computer-integrated manufacturing (CIM) systems will depend on our ability to develop reliable and reusable software for large complex systems on a timely basis. To date, software design has not gone very far beyond the ad hoc trial-and-error stage. Consequently, the development of software is slow, expensive, unreliable, and unmanageable. The purpose of this paper is to provide a scientific basis for designing software. The approach used here is that of axiomatic design, which is based on two design axioms: the Independence Axiom and the Information Axiom. The axiomatic approach is based on the recognition of the following common elements in design: the existence of independent domains (i.e. the consumer domain, the functional domain, the physical domain, and the process domain); the need to map between various domains during the design process; the decomposition of the characteristic vectors (i.e. functional requirements, design parameters, and process variables) in their respective domains; the zig-zagging required between the domains for decomposition; and the need to satisfy the design axioms during the design process. The axiomatic approach discussed in this paper provides decision making tools for software design in addition to systematic means of knowledge and data representation, synthesis and analysis of software, and the construction of the module-junction structure diagram.     

Long-term effect of lisinopril and atenolol on kidney function in hypertensive NIDDM subjects with diabetic nephropathy

The aim of our study was to evaluate whether inhibition of ACE (lisinopril 10-20 mg/day) can reduce the rate of decline in kidney function more than reducing blood pressure with conventional antihypertensive treatment (atenolol 50-100 mg/day), usually in combination with a diuretic. We performed a prospective, randomized, parallel study for 42 months, double blind for the first 12 months and single blind thereafter. Forty-three (21 lisinopril and 22 atenolol) hypertensive NIDDM patients with diabetic nephropathy were enrolled. Data from 36 patients (17 lisinopril and 19 atenolol, 60 +/- 7 years of age, 27 men) who completed at least 12 months of the study period are presented. At baseline, the two groups were comparable: glomerular filtration rate (51Cr-EDTA plasma clearance) was 75 +/- 6 and 74 +/- 8 ml x min(-1) x 1.73 m(-2), mean 24-h ambulatory blood pressure (A&D TM2420) was 110 +/- 3 and 114 +/- 2 mmHg, and 24-h urinary albumin excretion rate was 961 (range 331-5,727) and 1,578 (476-5,806) mg/24 h in the lisinopril and atenolol groups, respectively. The mean follow-up time was similar, 37 and 35 months in the lisinopril and atenolol groups, respectively. Mean ambulatory blood pressure was equally reduced in the two groups, 12 +/- 2 and 10 +/- 2 mmHg in the lisinopril and atenolol groups, respectively. Glomerular filtration rate declined in a biphasic manner with a faster initial (0 to 6 months) change of 1.25 +/- 0.49 and 0.81 +/- 0.29 ml x min(-1) x month(-1) followed by a slower sustained decline (6 to 42 months) of 0.59 +/- 0.10 and 0.54 +/- 0.13 ml x min(-1) x month(-1) in the lisinopril and atenolol groups, respectively. No significant differences were observed in either initial or sustained decline in glomerular filtration rate between the two groups. Urinary albumin excretion was reduced (% reduction of baseline) more in the lisinopril than in the atenolol group, at 55 (95% CI 29-72) and 15% (-13 to 34), respectively (P = 0.01). In conclusion, the relentless decline in kidney function characteristically found in hypertensive NIDDM patients with diabetic nephropathy can be reduced equally effectively by two antihypertensive treatments, the beta-blocker atenolol and the ACE inhibitor lisinopril.     

ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb

OBJECTIVE: The purpose of this study was to evaluate ERCP and CT findings of ectopic drainage of the common bile duct into the duodenal bulb. CONCLUSION: Although rare, the diagnosis of ectopic drainage of the common bile duct into the duodenal bulb is important to prevent inadvertent damage during biliary tract or gastric surgery and to clarify the cause of chronic peptic ulcers.     

Inhibition of Listeria monocytogenes on cold-smoked salmon by nisin and carbon dioxide atmosphere

The heat-stable enterotoxin of Escherichia coli binds to an intestinal receptor, guanylyl cyclase-C, and produces cGMP to induce diarrhea. Guanylin is an endogenous ligand of this receptor. In the present in vivo study, the intestinal water and ion secretion induced by mucosal application of 2 nmol/ml guanylin or 5 or 10 units/ml heat-stable enterotoxin into closed loops was compared in the rat. The characteristics of secretion induced by cAMP following intravenous perfusion of 1.2 nmol/100 g per h vasoactive intestinal peptide were compared to those induced by cGMP. Unidirectional Na+ and Cl- fluxes were estimated by addition of 22Na into the loop and i.v. injection of 36Cl. Guanylin induced less water and ion secretion than that produced by heat-stable enterotoxin in the colon, confirming the results of in vitro studies, and also in duodenum and ileum. The cAMP- or cGMP-mediated response had a similar pattern, i.e., an inhibition of Na+ absorption and an increase in anion secretion.     

Competency or incompetency--the dilemma

RATIONALE AND OBJECTIVES: Simplifying data collection and analysis should promote utilization management in review of examinations of the small bowel in the general practice. METHODS: A case control format with the generation of an odds ratio to answer sets of binary questions derived from annual examination data is shown. The positive examination results applied were compared with the literature as a cross-checking mechanism. The examination identified as most likely to be positive was recommended prospectively in a protocol for the following year. Two of 5 years are illustrated to emphasize the development of the methodology. RESULTS: Application of this model in testing its validity, since 1990 at Madigan Army Medical Center, allows for the generation of a new protocol each year to prospectively improve clinical definition. CONCLUSIONS: A 5-year analysis of small bowel examination protocols, subdivisions, and odds ratios, will be forthcoming. The 2 years illustrated show how strongly our practice was influenced in using enteroclysis or in using the small bowel follow through as the examination of choice in the various clinical categories of small bowel disease: (1) practice was influenced by protocol and (2) outcome was steered toward positive examinations.