Gasification of polyethylene using steam plasma generated by microwave discharge

Gasification of polyethylene (PE) pellet was studied using atmospheric argon-steam plasma generated by microwave discharge and the feasibility of the process was examined. The experimental results showed that additional steam to argon plasma promoted the weight decrease of PE and enhanced the production of H₂, CO, CO₂ and CH₄. The results confirmed that the treatment of plastics with the steam plasma was effective to obtain synthesis gas.     

Kinetic study on the first stage during thermal degradation of polystyrene

The kinetic parameters of the first stage of polystyrene degradation have been investigated to elucidate the reaction mechanisms using the flow reactor system. The decrease in molecular weight of polystyrene was recorded at minute intervals over the temperature range 310°–390°C. Generally, the first and second stages were observed by thermogravimetric analysis (t.g.a.), however in the early stage of the degradation volatile yields of at least 5% occurred. Therefore, using t.g.a. analysis it is difficult to detect this earlier stage. It became evident that the first stage in the earlier part of the reaction could be detected by g.p.c. analysis. We have observed the hidden kinetic parameters of the nature of the first stage of the polystyrene degradation. The results indicate that the main chains were degraded randomly with the small quantitative volatile groups in the first stage and the rates of decrease in molecular weight in the first stage against reaction temperatures were evaluated as log k_s = 12.0 ? 41300/RT.     

Thermal decomposition of uranium peroxide hydrates

The thermal decomposition of uranium peroxide hydrates, UO₄·4H₂O and UO₄·2H₂O, has been investigated by thermal analyses, X-ray diffraction study and infrared spectroscopy. As a result, it is concluded that the thermal decomposition of uranium peroxide hydrates proceeds in the following sequence: where 3 ≤ x ≤ 3.5.     

Immobilization of multicopper oxidase from Pyrobaculum aerophilum onto an electrospun-aligned single-walled carbon nanotube surface via a carbon-nanotube-binding peptide for biocathode

Biofuel cells (BFCs) that produce electrical energy from organic resources through enzymatic reactions have been attracting significant attention. Owing to the high electrical conductivity of carbon nanotubes (CNTs), their modification on the electrode surface of a BFC is expected to increase the current, and their high specific surface area may be useful in increasing the power output. Previously, we constructed a biocathode by immobilizing multicopper oxidase from Pyrobaculum aerophilum (McoP) with a carbon nanotube binding peptide (CBP) sequence on the CNTs. This resulted in higher current densities than when using enzymes without CBP sequences. However, owing to the randomly stacked CNTs on the surface of the electrodes, their conductive properties were impaired and performance as biocathodes was poor. Herein, we constructed a biocathode in which single-walled CNTs (SWCNTs) were oriented one-dimensionally and McoP is immobilized on the surface of an SWNCT via CBP. The current density was successfully increased by two-fold by orienting the CNTs and orienting and immobilizing McoP on their surfaces. This technology provides insights into the development of biodevices with controlled orientation of both the SWCNTs and enzymes immobilized on their surfaces.     

基于固态LTD的大容量脉冲功率电源

固态直线变压器驱动源(LTD)是新型的脉冲功率电路方法之一.其工作原理基于大量功率半导体器件的同步控制,因此它在电路结构和工作特性方面与传统的脉冲功率电源有很大不同.在此通过实验,首先验证了LTD的基本工作原理,进而试制了一台采用650个功率MOSFET的LTD系统.实验结果分别给出了超过20 kV的最高输出电压和超过3.2 kA的最高输出电流,上升时间(10％～90％)小于20 ns.在此基础上还采用少量的模块验证了双极性LTD的可行性.实验结果同时也显示了开关的导通电阻对LTD输出参数的影响和由此带来的技术问题.     

Generalized multiplicative stochastic processes arising from one-dimensional maps with noise

Artificial Life and Robotics - We propose a class of generalized multiplicative stochastic processes obtained by introducing an endo-perspective into one-dimensional maps with additive noise. We...     

A two-step surface-based 3D deep learning pipeline for segmentation of intracranial aneurysms

Computational Visual Media - The exact shape of intracranial aneurysms is critical in medical diagnosis and surgical planning. While voxel-based deep learning frameworks have been proposed for this...     

Phase Relations and Volume Changes of Hafnia under High Pressure and High Temperature

Using multi-anvil high-pressure devices and synchrotron radiation, X-ray in situ observations of HfO₂ under high pressure and high temperature have been performed to investigate its phase relations and compression behavior. An orthorhombic phase (orthoI) is stable from 4 to 14.5 GPa below 1250°–1400°C and transforms to a tetragonal phase, which is one of the high-temperature forms of HfO₂, above these temperatures. Another orthorhombic phase (orthoII) with a cotunnite-type structure appears above 14.5 GPa. OrthoII is stable up to 1800°C at 21 GPa. OrthoII is quenchable to ambient conditions. The orthoI-to-orthoII transition is accompanied by ∼8 vol% decrease. The bulk moduli of orthoI and orthoII at room temperature are 220 and 312 GPa, respectively. This low compressibility of orthoII indicates that it is a potential candidate for very hard materials.     

Self‐healing properties of TiO2 particle–polymer composite coatings for protection of aluminum alloys against corrosion in seawater

TiO₂ particle–polymer composite coatings were applied to the surface of a 5083 aluminum alloy. After using a knife to create an artificial defect, polarization resistance was monitored in artificial seawater at a temperature of 30 °C. The polarization resistance of the specimen coated with the composite polymer containing 3 vol% TiO₂ particles increased significantly over time, suggesting that the composite coating had self‐healing properties. A carbon‐containing 2‐µm thick film was found on the coated aluminum substrate at the site of the artificial defect. The formation of the film was related to the dissolution of bisphenol A (BPA), which is a chemical precursor of the polymer coating that behaved as an inhibiting agent.     

Highwall Stability due to Punch Mining at Opencut Coal Mines

Conventional highwall mining extracts coal with an auger machine or a continuous miner from exposed seams at the base of opencut or strip operations. However, under poor strata and high stress conditions, highwall mining cannot be conducted due to pillar and roof failures. In such cases, punch highwall mining is more effective than the conventional highwall mining. This paper describes conventional highwall mining and punch highwall mining systems and discusses the stability of the highwall due to punch highwall mining at opencut coal mines.