Microstructural and textural characterization of a hot-rolled IF steel

The present paper reports the experimental results on the microstructural and textural characterization of a hot-rolled IF steel. The IF steel was hot-rolled in multiple passes in the austenitic field (1,070 °C) followed by air-cooling. SEM, TEM, and LOM were used to image the microstructure of the material. The global texture was determined by X-ray diffraction (XRD) technique. The mesotexture of selected regions was investigated by electron backscatter diffraction (EBSD). Results show the presence of a diffuse (nearly random) and weak texture in the hot-band that consists of recrystallized polygonal grains and subgrains. The fraction of boundaries with misorientations comprised in the interval 2° ≤ ψ < 15° was found to be lower than 5%. It can be concluded that these low angle boundaries and the presence of subgrains can be associated to the existence of a few areas softened by recovery during or after hot rolling in austenitic field.     

Variations in fundamental frequency peak position in Japanese macaque (Macaca fuscata) coo calls.

Japanese macaques (Macaca fuscata) produce coo calls whose use in various contexts is correlated with differences in the relative temporal position of the peak value of a call's fundamental frequency (S. Green, 1975). Studies have produced conflicting results about both the location of the category boundary between smooth early high and smooth late high coo subtypes and macaques' perceptual sensitivity to variations in peak position. In this study, fundamental frequency peak positions were measured in 578 coos produced by 8 captive adult female Japanese macaques in order to test whether calls with peak positions close to either of 2 hypothesized boundaries occurred at low rates. Overall, such calls were found to occur at rates equal to or higher than predicted by chance. Peak position varied more consistently between animals than by behavioral context. The results may indicate that peak position in coos does not form 2 distinct categories. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An integrated automatic test data generation system

The Godzilla automatic test data generator is an integrated collection of tools that implements a relatively new test data generation method—constraint-based testing—that is based on mutation analysis. Constraint-based testing integrates mutation analysis with several other testing techniques, including statement coverage, branch coverage, domain perturbation, and symbolic evaluation. Because Godzilla uses a rule-based approach to generate test data, it is easily extendible to allow new testing techniques to be integrated into the current system. This article describes the system that has been built to implement constraint-based testing. Godzilla's design emphasizes orthogonality and modularity, allowing relatively easy extensions. Godzilla's internal structure and algorithms are described with emphasis on internal structures of the system and the engineering problems that were solved during the implementation.Parts of this research were supported by Contract F30602-85-C-0255 through Rome Air Development Center while the author was a graduate student at the Georgia Institute of Technology.     

Evaluation of Serum Volume Losses During Long-Term Storage

Aliquots of serum collected in a large case-control study of cervical cancer were stored at −70°C for up to 4 years during implementation of the study. When 500 μL serum aliquots were thawed in preparation for carotenoid and vitamin A assays, volumes were noticeably variable and fell below 500 μL in the majority of the samples. We were concerned about evaporation/sublimation during storage of the samples because loss of water would concentrate the analytes of interest. We evaluated the use of density and sodium ion concentration measurements to confirm its occurrence. We found that serum density was an unreliable indicator of extent of volume loss since the anticipated increases in density due to evaporation were of the same magnitude as inter-individual variation in serum density. In contrast, Na⁺ concentration is tightly regulated and would rise if water had been lost from the samples. In a representative sample of serum aliquots from the case-control study, 24 of 25 vials contained less than 500 μL of serum. The mean sodium ion concentration (138.1 ± 3.6 mmol/L) was within the normal range for human serum of 136–145 mmol/L, and no correlation was observed between serum volume and Na⁺ concentration. These results strongly suggest that the observed low volumes were not due to evaporative losses. Instead, the variably low volumes of serum aliquots were probably due to pipetting errors in the initial aliquotting resulting from the use of air-displacement pipettes.     

FracSym: Automated symbolic computation of Lie symmetries of fractional differential equations

In this paper, we present an algorithm for the systematic calculation of Lie point symmetries for fractional order differential equations (FDEs) using the method as described by Buckwar & Luchko (1998) and Gazizov, Kasatkin & Lukashchuk (2007, 2009, 2011). The method has been generalised here to allow for the determination of symmetries for FDEs with n$n$ independent variables and for systems of partial FDEs. The algorithm has been implemented in the new MAPLE package FracSym (Jefferson and Carminati 2013) which uses routines from the MAPLE symmetry packages DESOLVII (Vu, Jefferson and Carminati, 2012) and ASP (Jefferson and Carminati, 2013). We introduce FracSym by investigating the symmetries of a number of FDEs; specific forms of any arbitrary functions, which may extend the symmetry algebras, are also determined. For each of the FDEs discussed, selected invariant solutions are then presented.     

The effect of cooling rate on the impact performance and dynamic mechanical properties of rotationally molded metallocene catalyzed linear low density polyethylene

This article examines changes to the morphology of rotationally molded metallocene catalyzed linear low density polyethylene brought about by varying the cooling rate during processing. These changes in morphology lead to variations in the impact performance, which is reflected in the dynamic mechanical characteristics of the materials. Various analytical techniques are used in an attempt to explain the differences in impact behavior. Slow cooling is shown to result in high crystallinity, and in the formation of large spherulites, which in turn is detrimental to the impact performance of the material, particularly at low temperatures. The high crystallinity corresponds with a shift in the β transition of the material to a higher temperature, and is shown to result in a higher brittle–ductile transition. A case study was also carried out on samples from a finished part provided by an industrial molder, one section of which failed in a brittle manner when impact tested while the other failed in a ductile manner. Microscopy results showed that the brittle material had large spherulites at the inside surface, while the ductile material showed incipient degradation at this surface, which has previously been shown to be of benefit to impact strength in rotationally molded parts. Dynamic mechanical studies again showed a β transition at a higher temperature in the brittle samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1963–1971, 2006     

Minimal ordering constraints for some families of variable symmetries

Variable symmetries in a constraint satisfaction problem can be broken by adding lexicographic ordering constraints. Existing general methods of generating such sets of ordering constraints can require a huge number of constraints. This adds an unacceptable overhead to the solving process. Methods exist by which this large set of ordering constraints can be reduced to a much smaller set automatically, but their application is also prohibitively costly. In contrast, this paper takes a bottom-up approach. It examines some commonly-occurring families of groups and derives a minimal set of ordering constraints sufficient to break the symmetry each group describes. These minimal sets are then used as building blocks to generate minimal sets of ordering constraints for groups constructed via direct and imprimitive wreath products. Experimental results confirm the value of minimal sets of ordering constraints, which can now be generated much more cheaply than with previous methods.     

Non-surgical alternative in the treatment of skeletal Class III problems

The dental profession is not static, but dynamic. New research findings, along with medical and technological advances, necessitate constant re-examination of treatment philosophies and techniques. What were acceptable treatment techniques in the past may not necessarily be the most effective and best techniques for our patients today. Currently, many practitioners feel that the only treatment for the correction of a skeletal Class III abnormality is via orthognathic surgery in older patients. In some cases it may be the only treatment option. But in most cases today, there are more conservative, non-surgical treatment alternatives in correcting Class III problems in younger aged children. In treating facial-skeletal problems, it must be emphasized that the human face is a biological masterpiece of form and function. Its importance has been documented in arts and sciences since the beginning of modern civilization. It is important enough so that individuals who are blessed with attractive features are afforded greater opportunities in our society. Attractive faces are associated with intelligence, honesty and good work ethics. With the advent of orthognathic surgery, functional appliance, functional regulator, and myofunctional therapy, the dental profession has the capability of leveling out the playing field for many individuals in our society. It does so by being able to correct problems closely associated with the human psyche--the human face. The ability to change facial features brings tremendous prestige to our profession. Along with this prestige comes greater responsibility. Our ability to change facial features entails greater understanding of facial balance and harmony. Ricketts states that the face must conform to stringent proportions known as the "divine proportion" in order for it to be esthetically pleasing. Also, our ability to move facial-skeletal structures entails greater understanding of the biomechanics of the human face. Without this knowledge practitioners can cause iatrogenic problems, such as temporomandibular disorders. Conversely, correcting facial-skeletal abnormalities have been found to alleviate many medical problems, such as chronic headaches, neck-back-shoulder pain, respiratory disorders, auditory disorders, etc. As more and more information is gathered, it is becoming clear that the physical, emotional and psychological health of a human being is intimately related to craniomandibular anatomy. In fact, the jaw and dental structures (with the exception of the tooth enamel) is formed from the neural crest cells along with the endocrine system, while the central nervous system is formed from the neural tube. The entire nervous system, the endocrine system and the dental system are formed from common tissue origin. This can explain why many facial-skeletal corrections are often accompanied by alleviation of many medical and physiological problems. These are exciting times for our profession. However, if we wish to address the needs of our patients well into the next century, we must continue to seek greater and greater knowledge in the area of the craniomandibular anatomy relative to the rest of the human body. It has much to do with facial esthetics, physiologic and psychologic harmony, and TMJ health. This knowledge will enable our profession to have the power to change human lives in a very positive way. As doctors, there can be no greater personal and professional satisfaction than to realize that, through our professional intervention, we are able to offer our patients the possibility of achieving greater happiness and quality of life.