An integrated tool for loop calculations: aITALC

aITALC, a new tool for automating loop calculations in high energy physics, is described. The package creates Fortran code for two-fermion scattering processes automatically, starting from the generation and analysis of the Feynman graphs. We describe the modules of the tool, the intercommunication between them and illustrate its use with three examples.

Program summary

Title of the program:aITALC version 1.2.1 (9 August 2005)Catalogue identifier:ADWOProgram summary URL:http://cpc.cs.qub.ac.uk/summaries/ADWOProgram obtainable from:CPC Program Library, Queen's University of Belfast, N. IrelandComputer:PC i386Operating system:GNU/Linux, tested on different distributions SuSE 8.2 to 9.3, Red Hat 7.2, Debian 3.0, Ubuntu 5.04. Also on SolarisProgramming language used:GNU Make, Diana, Form, Fortran77Additional programs/libraries used:Diana 2.35 (Qgraf 2.0), Form 3.1, LoopTools 2.1 (FF)Memory required to execute with typical data:Up to about 10 MBNo. of processors used:1No. of lines in distributed program, including test data, etc.:40 926No. of bytes in distributed program, including test data, etc.:371 424Distribution format:tar gzip fileHigh-speed storage required:from 1.5 to 30 MB, depending on modules present and unfolding of examplesNature of the physical problem:Calculation of differential cross sections for e⁺e⁻ annihilation in one-loop approximation.Method of solution:Generation and perturbative analysis of Feynman diagrams with later evaluation of matrix elements and form factors.Restriction of the complexity of the problem:The limit of application is, for the moment, the 2→2 particle reactions in the electro-weak standard model.Typical running time:Few minutes, being highly depending on the complexity of the process and the Fortran compiler.     

Reasons for drop in shell-and-tube condenser performance when replacing R22 with zeotropic mixtures. Part 1. Analysis of experimental findings

An experimental and theoretical investigation was made to find out the reasons for the drop in shell-and-tube condenser performance when replacing R22 with a zeotropic mixture R407C. Measurements show that at lower condenser loads the reduction in performance can be as large as 70% compared to the full condenser load. Calculation results are compared with experimental results for two different condensers, one with micro-finned tubes and one with 3-D finned tubes. Calculations show that the degree of mixing of the newly formed condensate on a tube and the drained condensate is a factor influential enough to explain the performance drop. 3-D finned tubes seem to have better mixing in the condensate than integral finned tubes.     

Strain energy distribution in a crack-tip region in random fiber networks

A closed form relation for the strain energy density in the vicinity of a macroscopic mode I crack in a random fiber network is derived using an implicit gradient nonlocal continuum field theory. An expression for the characteristic length, used in the nonlocal formulations, in terms of microstructural properties is derived and it is found that the characteristic length is proportional to the average fiber segment length to the power of two. It is illustrated that the crack-tip singularity vanishes for a characteristic length greater than zero. An open fiber structure exhibits a distributed strain energy field in the crack tip vicinity. As the network becomes relatively denser, the characteristic length decreases and the networks mechanical behavior approaches the behavior of a classic elastic continuum. Only for an infinitely dense network is the r ⁻¹-singularity in strain energy field achieved. The theory explains why open network structures have difficulties in localizing failure to macroscopic cracks. It is found that there is a one-to-one relation between characteristic length and size of the smallest crack that can initiate macroscopic failure.     

Spatial analysis of annual air pollution exposure and mortality

The aim of this study was to relate ambient air pollution levels to mortality in Auckland, New Zealand. We used urban airshed modelling and GIS-based techniques to quantify long-term exposure to ambient air pollution levels and associated mortality. After adjusting for age, sex, ethnicity, socio-economic status, and urban/rural domicile there was a 1.3% (95%CI: 1-1.5%) increase in non-external cause mortality, and 1.8% (95%CI: 1.5-2.1%) increase in circulatory and respiratory causes per 1 microg/m(3) increase in annual average NO(2). Based on these exposure-response relationships and applying an annual average threshold of 13 microg/m(3), the average annual (for 1996-1999) number of people estimated to die from non-external causes and circulatory and respiratory causes attributable to air pollution in Auckland is 268 (95% range: 227-310) (3.9% of total all cause deaths) and 203 (95% range: 169-237) (5.9% of total circulatory and respiratory deaths) per year, respectively. The number of attributable deaths found in this study are consistent with a previous New Zealand risk assessment using a different methodology, and is approximately twice the number of people dying from motor vehicle accidents in the region, which is on average (1996-1999) 103 per year. The GIS-based exposure maps identify high exposure areas for policy developers and planners in a simple and realistic manner. Taken together with overseas studies the study provides additional evidence that long-term exposure to poor air quality, even at levels below current standards, is a hazard to the public health.     

Accurate wavelength measurements of a putative standard for near-infrared diffuse reflection spectrometry

The diffuse reflection (DR) spectrum of a sample consisting of a mixture of rare earth oxides and talc was measured at 2 cm-1 resolution, using five different accessories installed on five different Fourier transform near-infrared (FT-NIR) spectrometers from four manufacturers. Peak positions for 37 peaks were determined using two peak-picking algorithms: center-of-mass and polynomial fitting. The wavenumber of the band center reported by either of these techniques was sensitive to the slope of the baseline, and so the baseline of the spectra was corrected using either a polynomial fit or conversion to the second derivative. Significantly different results were obtained with one combination of spectrometer and accessory than the others. Apparently, the beam path through the interferometer and DR accessory was different for this accessory than for any of the other measurements, causing a severe degradation of the resolution. Spectra measured on this instrument were removed as outliers. For measurements made on FT-NIR spectrometers, it is shown that it is important to check the resolution at which the spectrum has been measured using lines in the vibration-rotation spectrum of atmospheric water vapor and to specify the peak-picking and baseline-correction algorithms that are used to process the measured spectra. The variance between the results given by the four different methods of peak-picking and baseline correction was substantially larger than the variance between the remaining five measurements. Certain bands were found to be more suitable than others for use as wavelength standards. A band at 5943.13 cm-1 (1682.62 nm) was found to be the most stable band between the four methods and the six measurements. A band at 5177.04 cm-1 (1931.61 nm) has the highest precision between different measurements when polynomial baseline correction and polynomial peak-picking algorithms are used.     

Patch testing with budesonide in serial dilutions: the significance of dose, occlusion time and reading time

Dipeptide transporters in small intestine have a very wide substrate specificity, so that the transporter sometimes serves as a carrier for peptide-like compounds. We have synthesized dipeptide analogues conjugated at an epsilon-amino group of Lys in Val-Lys or Lys-Sar with fluorescent compounds such as fluorescein isothiocyanate and coumarin-3-carboxylic acid. Uptakes of these peptide analogues were examined by measuring intracellular accumulations into monolayers of the human intestinal epithelial cell line Caco-2 expressing the dipeptide transporter PEPT1. Kinetic analysis and effects of addition either of uncoupler (protonophore) or by Gly-Sar, one of the good substrates of PEPT1, revealed that fluorescent dipeptides were taken up by passive diffusion. In contrast, these analogues remarkably inhibited the Gly-Sar uptake by Caco-2 cells. Among the fluorescent analogues synthesized in this paper, Val-Lys(Flu) was the most potent competitive inhibitor against the Gly-Sar uptake with an inhibition constant of 5 microM. This value is the smallest among those ever reported: Val-Lys(Flu) has the highest affinity for PEPT1 among chemicals ever reported. The importance of the hydrophobic part of the substrate was pointed out.     

Technical note: Comparing calibration methods for determination of protein in goat milk by ultraviolet spectroscopy

A rapid spectroscopic method to determine total protein in bovine and buffalo milk using UV spectra of guanidine-hydrochloride mixed milk has previously been reported and validated. The method was based on mixed calibration samples and univariate calibrations of fourth derivative (4D) spectra. In this study the same method was compared and tested for determination of total protein in goat milk. Calculations based on multivariate calibration (partial least squares regression) on full spectra of goat milk were used. The method was tested on 2 UV instruments. The comparison resulted in a significantly more robust (i.e., better) transferability between UV instruments for the partial least squares regression method on full spectra compared with previous univariate calibration of 4D spectra. Local (1 instrument) calibrations gave similar, significantly not different (chi-squared test) cross-validated prediction error results for the 2 methods. It can be concluded that there is no need for fourth derivation. Partial least squares regression on full spectra was equal or superior to using the 4D spectra.     

Tunneling Through a Single Quench-condensed Cluster

Quench-condensed bismuth films of 3–5 nm thickness have beenused as a cluster source to prepare Single ElectronTransistors (SET) based on a single cluster with high chargingenergy. We used electron-beam defined shadow evaporation masksto pattern 10 nm wide constrictions in these films. Byincremental depositions through these masks controlled by insitu sample conductance measurements, we obtained a SETgeometry for clusters with charging energies up to 90 meV. Ourexperiment showed that the SET geometry can be achieved inevery sample preparation run, despite the apparent randomnature of cluster formation in granular films. The resultingcharging energy of the transistor varied from experiment toexperiment. Its value, however, was always higher than 10 meV.     

Critical conditions for onset of mould growth under varying climate conditions

A performance-based service life design format based on climatic exposure on one hand and “resistance” of materials against mould growth on the other hand, is presented in this paper. A limit state for onset of mould growth is defined as the occurrence of traces of mould observed by microscopy. A dose–response model is proposed by which onset of mould growth can be predicted for an arbitrary climate history of combined relative humidity ? and temperature T. The model is calibrated and verified against a comprehensive set of experimental data published by Viitanen et al. [Viitanen H, Ritschkoff A-C. Mould growth in pine and spruce sapwood in relation to air humidity and temperature. Uppsala: Swedish University of Agricultural Sciences, Department of Forest Products; 1991. Report No. 221, 49 p.; Viitanen H. Modelling the time factor in the development of mould fungi – effect of critical humidity and temperature conditions in pine and spruce sapwood. Holzforschung 1997;51(1):6–14; Viitanen H. Modelling the time factor in the development of brown rot decay in pine and spruce sapwood – the effect of critical humidity and temperature conditions. Holzforschung 1997;51(2):99–106; Viitanen H, Bjurman J. Mould growth on wood under fluctuating humidity conditions. Material und Organismen 1995;29(1):27–46] describing mould development on spruce and pine sapwood as a function of climatic exposure. The model is applied to predict time to onset of mould growth under natural outdoor climate (under shelter) as well as mould development in building attics and in crawl space foundations. The predicted response shows reasonable agreement with experimental observations and proven experience, although biological processes of this type display great variability. The results show that a generally applicable, quantitative model can be used as a powerful tool for moisture safe design in practice. The model is designed to facilitate continuous improvement of prediction capability by further laboratory testing of various materials under specified climate conditions. In combination with currently available building physics software the model is suitable for moisture safe design of wood-based components in the building envelope.