An Analysis of Scheduling Policies In Multiechelon Production Systems

Results of a simulation study of the economics of frequency of rescheduling Material Requirements Planning (MRP) systems are presented for a single-product, two-stage system in which demand is uncertain. The results indicate that for systems with moderate demand uncertainty, frequent rescheduling to maintain customer service may be uneconomical when compared with the alternative of more stable schedules in conjunction with safety stock. This result arises primarily because the cost of “emergency” production setups which occur when rescheduling is frequent exceeds the cost of safety stock required to “protect” stable schedules.     

HEURISTIC APPROACHES FOR LOADING PROBLEMS IN FLEXIBLE MANUFACTURING SYSTEMS

Flexible manufacturing systems (FMSs) are able to process a wide variety of operations, but the specific mix of operations that can be performed at any point in time depends upon the combination of tools loaded onto the machines. The machines have tool magazines with finite capacities. We consider the problem of assigning operations and their associated tools to machines (or groups of machines) to maximize the throughput for a specified steady-state mix of orders. Since this objective is difficult to deal with directly, we use an intermediate objective of meeting workload targets for each machine group as closely as possible. A certain form of this intermediate objective has been shown to correlate highly with the original objective.

Since it is computationally intractable to find optimal solutions for problems with more than 20 operations, fast heuristic algorithms are developed. These algorithms are adapted from multi-dimensional bin-packing algorithms. Computational results are reported.     

DRYING OF GRANULAR PARTICLES IN A MULTISTAGE INCLINED FLUIDIZED BED WITH MECHANICAL VIBRATION

A mathematical model for the drying rate of granular particles in a multistage inclined fluidized bed(IFB) is presented from the standpoint of simultaneous heat and mass transfer, with taking the effect of mechanical vibration added vertically into consideration.

Steady-state distributions for the temperatures and concentrations of the particles and the heating gas, and for the moisture content of the particles are numerically calculated based on the present model. The calculated results show fairly good agreement with the experimental data, which were obtained from the drying experiments of brick particles in a three-stage IFB using comparatively low temperature air(40-60°C) as the heating gas.

It has been found within the range of the experimental conditions employed that, the mechanical vibration added vertically enhances the over-all drying rate of the particles and its effect can be considered equivalent to an increase in the air velocity.     

Path tracking control of a manipulator considering torquesaturation

When the minimum-time trajectory of a manipulator along a geometrically prescribed path is planned taking into consideration the manipulator's dynamics and actuator's torque limits, at least one of the joints should be at the torque limit. The execution of such a trajectory by a conventional feedback control scheme results in torque saturation. Consequently, the tracking error cannot be suppressed and the manipulator may deviate from the desired path. In this paper, the author's propose a feedback control method for path tracking which takes the torque saturation into account. Based on the desired path, a coordinate system called path coordinates is defined. The path coordinates are composed of the component along the path and the components normal to the path. The equation of motion is described in terms of the path coordinates. Control of the components normal to the path is given priority in order to keep the motion of the manipulator on the path. Simulations of a two-degree-of-freedom manipulator show the effectiveness of this method     

Effects of Particle Size of Bulk Drug and food on the Bioavailability of U-78875 in Dogs

The effects of particle size and food on the absolute bioavailability of U-78875 in dogs after oral administration of either a suspension or tablet dosage form were investigated. A reduction of particle size caused a significant increase in bioavailability along with an increase in dissolution rate. Additionally, both suspension and tablet dosage forms administered after food caused an increase in bioavailability. Thus, to accelerate drug dissolution, a reduction of U-78875 particle size from the unmilled state is important for the optimization of formulation compositions. To increase the bioavailability of U-78875, postprandial dosing should be considered.     

Extrathymic differentiation of resident T cells in the joints of mice with collagen-induced arthritis

Murine collagen-induced arthritis (CIA) is known as a T cell-mediated autoimmune disease, although autoantibodies are also suspected to be associated with the onset of the disease. To determine the origin of such T cells in the joints of mice with CIA, their phenotypic properties as well as those of T cells in other immune organs were examined in DBA/1 mice. Since a significant number of mononuclear cells (MNC) was also yielded by the joints of normal DBA/1 mice, the properties of these T cells were examined in parallel. When CIA was induced by an intradermal injection of type II collagen at the base of the tail, the numbers of MNC yielded by the regional lymph nodes and the foot joints were doubled. Interestingly, regardless of the onset of CIA, the joints were always comprised of unique T cell populations, including IL-2(R)alpha- beta+ T cells, gammadelta T cells, CD8alpha+ beta- cells, and CD44+ L-selectin- cells. All these properties coincide with those of extrathymic T cells in liver and intestine. In the case of gammadelta T cells in joints, Vgamma and Vdelta usages were unique and different from those in the other organs. More importantly, Vgamma and Vdelta usages in gammadelta T cells in the joints of normal mice and in those of mice with CIA were essentially the same. Taken together with the expression of recombination-activating gene-1 and -2 mRNAs by MNC in mice with CIA, these findings raise the possibility that the joints have their own resident T cells that are extrathymically generated in situ.     

Synthesis of thermosetting poly(phenylene ether) containing allyl groups

New thermosetting poly(2-allyl-6-methylphenol-co-2,6-dimethylphenol)s (3) have been developed by oxidative coupling copolymerization of 2-allyl-6-methylphenol (1) with 2,6-dimethylphenol (2), followed by thermal curing. Copolymerization was conducted in nitrobenzene in the presence of copper(I) chloride and pyridine as the catalyst under a stream of oxygen, producing high molecular weight copolymers (M_n∼50,000) with broad molecular weight distributions (M_w/M_n∼35). The structure of resulting copolymers 3 was characterized by IR, ¹H, and ¹³C NMR spectroscopy. Cross-linking reactions of copolymers were carried out by thermal treatment in the absence or presence of a peroxide (3 wt%, 2,5-dimethyl-2,5-di(tert-butylperoxy)-3-butane). The 10% weight loss and glass transition temperatures of the cured copolymers were 436 °C in nitrogen and 235 °C, respectively after curing at 70 °C for 1 h and 300 °C for 1 h. The average refractive index of the cured copolymer (3b) film was 1.5407, from which the dielectric constant (ε) at 1 MHz was estimated as 2.6. The ε and dissipation factor of copolymer-films at 1 MHz were directly measured from their capacitances as 2.5-2.6 and 0.0015-0.0019, respectively.     

Carbonization and graphitization of poly-p-phenylene sulphide (PPS) film

Oriented poly-p-phenylene sulphide (PPS) films (thickness 12 and 75 m) and PPS powder were carbonized/graphitized after stabilizing by oxidation, in order to examine the effect of sulphur on graphitizability of the resulting carbons. The films and the powder resulted in carbons with a high and a low graphitizability respectively. An in-plane oriented structure of the PPS film was the most predominant factor to lead to a high graphitizability, and sulphur in the precursor did not lower the graphitizability when it was subjected to solid-phase carbonization. These phenomena are discussed on the basis of analytical data.     

Modified Bagolini striated glass test: clinical applications of starlight test in binocular visual field screening

AIM: To introduce the "starlight" test which was devised to check binocular vision in normal conditions of seeing in a rapid, easy, and cost effective manner and to estimate the possibility of its clinical use in screening the binocular visual field of patients. METHOD: The Bagolini striated glass test consists of optically plano lenses with imperceptible parallel scratches that barely blur the environment but produce two perpendicular luminous stripes (right eye stripe of 45 degrees and left eye stripe of 135 degrees) when subjects with normal binocular vision view one light source. Unlike the original Bagolini test, the starlight test uses three light sources in horizontal or vertical lines according to the testing purposes and the subject is asked to fixate upon the centre light. Through Bagolini glasses, the subject observes the resulting grid-like pattern and the state of binocular visual field of the subject can be roughly estimated. RESULTS: Normal subjects and patients with strabismus, visual field loss from intracranial diseases, glaucoma, retinitis pigmentosa, and functional visual loss were examined using the starlight test and findings from each case were discussed. CONCLUSIONS: The starlight test, which was made by hand at a low cost, is a simple test that can be used clinically. It provides information about the state of binocular vision of patients in normal conditions of seeing. It is also useful because it enables the examiner to share similar experiences with the examinee. The results suggest it can be effective in visual field screening.