Electrical and optical properties of semi-insulating polycrystalline silicon thin films: the role of microstructure and doping

We have investigated the relationship between microstructure and electrical conductivity in semi-insulating polycrystalline silicon (SIPOS) with oxygen concentrations in the 2–35 at.% range and the effect of doping with boron, phosphorus, arsenic and erbium by ion implantation. SIPOS thin films are mixtures of silicon and silicon oxide phases. The chemical and morphological evolution of these phases upon annealing is emphasized. Electrical conductivity measurements are interpreted in terms of a physical model containing few free parameters related to the material microstructure. A direct extension of this model explains also the conductivity increase in SIPOS doped with elements of the third or the fifth group. In the last part of the paper, data of electroluminescence at 1.54 μm in Er-implanted SIPOS due to intra-4f transitions of the Er³⁺ ion are shown and discussed.     

Stick-slip vibrations of a two degree-of-freedom geophysical fault model

This paper considers the behaviour of a two degree-of-freedom autonomous system with static and dynamic friction consisting of two blocks linked by springs on a moving belt. This system is the simplest model which has been used to simulate the dynamics of seismic faults. The friction force is assumed to be a decreasing function of the relative sliding velocity. The motion of the blocks is composed of a uniform stick motion, during which the divergence of the system is zero, and an accelerated slip motion, during which the divergence is positive. The mathematical model by definition concentrates the dissipation on the point where the slip motion ceases. It is assumed that slip occurs only in one direction. A three-dimensional Poincaré map and a scalar single variable map are discussed which characterize the dynamics of the system in a simple way. The one-dimensional map can be used to diagnose the chaotic behaviour of the full system, and quantities, similar to Lyapunov exponents, can be easily calculated which provide information regarding the system-sensitive dependence on initial conditions. The system dynamics illustrate the idea of studying the earthquake generation mechanism as a chaotic phenomenon.     

Silver electrodeposition from air and water-stable ionic liquid: An environmentally friendly alternative to cyanide baths

The influence of temperature on the kinetics and the morphology of silver deposits obtained from an air and water-stable ionic liquid (the 1-butyl-3-methyl imidazolium tetrafluoroborate) was studied by means of cyclic voltammetry and chronoamperometry. The nucleation and growth mechanisms have been investigated and the effect of temperature evaluated up to 200 °C. Dense, pure and very thin (about 0.3 μm) silver coatings, with decorative properties, have been obtained on commercial copper electrodes at different temperatures. The characterization of the deposits morphology has been performed by visual investigation and SEM microscopy. Data about thickness were acquired by Calotest® measurements. The deposits result constituted by pure silver as determined by combination of EDX microanalysis and Auger Electron Spectroscopy (AES). The deposition method promises to be a new, environmentally friendly, method for silver electrodeposition which is the reason for the absence of cyanide and volatile toxic solvents in the electroplating bath.     

Oxygen-haemoglobin dissociation curve in hypoxic rats of first or second generation

1. Albino Wistar rats were raised in a normobaric hypoxic environment (10% O2 in N2). Two generations of hypoxic rats were observed for changes in their haemoglobin-oxygen (Hb-O2) dissociation curves (ODC), 2,3-diphosphoglycerate (2,3-DPG), haemoglobin (Hb), and Hill co-efficients at P50 (n50). The first generation were called (H1) and the second generation (H2). The control group (N) had a normoxic environment. 2. Thirty-five rats (13 N rats, 12 H1 rats and 10 H2 rats) were used. The 2,3-DPG was significantly higher in both hypoxic groups when compared with N rats (2.02 +/- 0.51 mmol/L) but 2,3-DPG of H2 rats was significantly lower than that of H1 rats (H1 = 3.48 +/- 0.58 mmol/L and H2 = 2.76 +/- 0.54 mmol/L). The haemoglobin values were N = 2.00 +/- 0.26, H1 = 2.65 +/- 0.32 and H2 = 2.36 +/- 0.30 mmol/L, respectively. 3. We observed considerable differences in Hb-O2 affinity between the three groups of rats. In standard conditions (pH = 7.400; pCO2 = 40 mmHg at 37 degrees C) the H1 rats showed a significantly decreased Hb-O2 affinity (P50,st = 37.0 +/- 1.3 mmHg) when compared with both H2 and N rats; the H2 rats showed a significantly increased Hb-O2 affinity (P50,st = 31.1 +/- 1.5 mmHg) when compared with controls N (P50,st = 34.7 +/- 2.1 mmHg). There were no significant differences in n50 values: N = 2.88 +/- 0.44; H1 = 2.88 +/- 0.77; and H2 = 2.94 +/- 0.67.(ABSTRACT TRUNCATED AT 400 WORDS)     

Recognition of Adulterated Oils by Direct Analysis of the Minor Components

Recognition of adulteration by other oils via direct analysis of the minor components (“sterol fraction”) is shown for olive oil. 10 % of various oils were admixed, the free alcohols silylated and the minor components analyzed by on-line coupled LC-GC-FID. For most oils, even smaller additions can be recognized. Admixed oils can no longer be determined, however, if their minor components have been removed by strong raffination. Bleaching of rapeseed oil with 7% of earth at 180 °C, in fact, completely removed free and esterified sterols.     

Gamma irradiation of PolyEthyleneTerephthalate and PolyEthyleneNaphthalate

The effect of gamma irradiation in air is investigated in two thermoplastic polyesters (PET and PEN), in order to evaluate the influence of aromatic density and the role of oxygen on radiation resistance. EPR measurements were carried out to detect radical stability against oxygen permeation and to provide radical characterization. Viscometric data reveal a different behaviour between films and thick samples. Positron annihilation spectra show a decrease of ortho-positronium intensity, which is more marked in film samples. ortho-positronium lifetime does not depend on the radiation dose.     

Optimal-tuning PID control of adaptive materials for structural efficiency

The objective of this paper was solving the optimization problem of lightweight stiffened structures modelled as a two-dimensional domain in an efficient computational way. The underlying premise was that mass should be distributed in an efficient way, so as to use a minimum amount of material to accomplish the mechanical function. This premise was expressed as a global, multi-objective optimization problem in which stiffness and mass were conflicting objectives. Alternative local evolution rules were implemented to update mass density or Young’s modulus at each step of the iterative procedure. The solution of the structural optimization problem was accomplished by a novel automatic procedure consisting of two consecutive stages of control and optimization. In the first stage of Proportional Integral Derivative (PID) control gains were manually selected whereas in the second stage the finding of optimal values of control gains, target, and cost indices was allowed. In this study a bone-like material was adopted and a thin slab was analysed as a sample problem.     

A Semantic Proof of Polytime Soundness of Light Affine Logic

We define realizability semantics for Light Affine Logic ( LAL\mathsf{LAL} ) which has the property that denotations of functions are polynomial time computable by construction of the model. This gives a new proof of polytime-soundness of LAL\mathsf{LAL} which is considerably simpler than the standard proof based on proof nets and is entirely semantical in nature. The model construction uses a new instance of a resource monoid; a general method for interpreting systems based on Linear Logic introduced earlier by the authors.     

Realizability models and implicit complexity

New, simple, proofs of soundness (every representable function lies in a given complexity class) for Elementary Affine Logic, LFPL and Soft Affine Logic are presented. The proofs are obtained by instantiating a semantic framework previously introduced by the authors and based on an innovative modification of realizability. The proof is a notable simplification on the original already semantic proof of soundness for the above mentioned logical systems and programming languages. A new result made possible by the semantic framework is the addition of polymorphism and a modality to LFPL, thus allowing for an internal definition of inductive datatypes. The methodology presented proceeds by assigning both abstract resource bounds in the form of elements from a resource monoid and resource-bounded computations to proofs (respectively, programs).