Surface geometry of slide bearings after percussive burnishing

A review of literature about the effect of oil pockets on improvement of sliding elements tribological performance as well as about the changes of surface topography during “zero-wear” process is shown. The paper presents also the results of experimental investigations done in the Department of Manufacturing Processes and Production Organisation of Rzeszow University of Technology, connected with the creation of oil pockets on sliding surfaces. In order to simulate a deterministic surface a program for the visualisation of pits was written. The procedures for assessment of the oil pocket size of specific shape and oil pockets coverage are presented. The tendencies of changes of surface topography and oil pockets dimensions during “zero-wear” process are also described.     

Psychophysical basis for maximum pushing and pulling forces: A review and recommendations

The objective of this paper was to perform a comprehensive review of psychophysically determined maximum acceptable pushing and pulling forces. Factors affecting pushing and pulling forces are identified and discussed. Recent studies show a significant decrease (compared to previous studies) in maximum acceptable forces for males but not for females when pushing and pulling on a treadmill. A comparison of pushing and pulling forces measured using a high inertia cart with those measured on a treadmill shows that the pushing and pulling forces using high inertia cart are higher for males but are about the same for females. It is concluded that the recommendations of Snook and Ciriello (1991) for pushing and pulling forces are still valid and provide reasonable recommendations for ergonomics practitioners. Regression equations as a function of handle height, frequency of exertion and pushing/pulling distance are provided to estimate maximum initial and sustained forces for pushing and pulling acceptable to 75% male and female workers.     

Empathy and Modern Technology: A Neuroergonomics Perspective

The primary purpose of this paper is to discuss the role of empathy in the design of advanced systems in manufacturing and service industries in order to ensure suitable working conditions for employees from the social and technological point of view. The origins and components of empathy are briefly reviewed. The neural underpinnings of three components of empathy, including cognitive, emotional, and behavioral aspects, are considered in the context of human–human and human–machine interactions, as well as design of working environments. Finally, the potential advantages of applying empathy‐related knowledge to the design and development of human‐centered technology are discussed.     

A general topology-based framework for adaptive insertion of cohesive elements in finite element meshes

Large-scale simulation of separation phenomena in solids such as fracture, branching, and fragmentation requires a scalable data structure representation of the evolving model. Modeling of such phenomena can be successfully accomplished by means of cohesive models of fracture, which are versatile and effective tools for computational analysis. A common approach to insert cohesive elements in finite element meshes consists of adding discrete special interfaces (cohesive elements) between bulk elements. The insertion of cohesive elements along bulk element interfaces for fragmentation simulation imposes changes in the topology of the mesh. This paper presents a unified topology-based framework for supporting adaptive fragmentation simulations, being able to handle two- and three-dimensional models, with finite elements of any order. We represent the finite element model using a compact and “complete” topological data structure, which is capable of retrieving all adjacency relationships needed for the simulation. Moreover, we introduce a new topology-based algorithm that systematically classifies fractured facets (i.e., facets along which fracture has occurred). The algorithm follows a set of procedures that consistently perform all the topological changes needed to update the model. The proposed topology-based framework is general and ensures that the model representation remains always valid during fragmentation, even when very complex crack patterns are involved. The framework correctness and efficiency are illustrated by arbitrary insertion of cohesive elements in various finite element meshes of self-similar geometries, including both two- and three-dimensional models. These computational tests clearly show linear scaling in time, which is a key feature of the present data-structure representation. The effectiveness of the proposed approach is also demonstrated by dynamic fracture analysis through finite element simulations of actual engineering problems.

Fast and versatile texture-based wireframe rendering

This paper revisits the problem of wireframe rendering, which, at first, appears to be an easily solved problem. However, the conventional solution is inefficient and does not result in high-quality images. Recently, graphics hardware programming has been employed to achieve high-quality solid line rendering. In this paper, we present a simpler and faster technique for wireframe rendering based on texture mapping. Our technique does not require (but can benefit from) graphics hardware programming and thus can be easily integrated into existing rendering engines, while resulting in fast, accurate, high-quality, anti-aliased, and still versatile, wireframe drawing. For topologically structured meshes, our approach allows the rendering of wireframe decoupled from the underlying mesh, making possible the rendering of original wireframes on top of decimated meshes.     

A roadmap for a methodology to assess,improve and sustain intra‐ and inter‐enterprise system performance with respect to technology‐product life cycle in small and medium manufacturers

Increased manufacturing costs are forcing U.S. manufacturing firms to send their operations off shore. Such business practices are greatly impacting the vitality of small and medium manufacturers (SMMs) in the U.S. economy. This article intends to advance the notion of the need for a methodology for assessment, improvement, and sustainability of intra‐ and inter‐enterprise system performance along the technology–product development life cycle. The aims of this article are to: (1) provide an overview of the technology–product development process; (2) document the different states of manufacturing technology readiness levels; (3) present an overview of prior methodologies reported on the subject in the published literature; and (4) establish a road map for assessment, improvement, and sustainability of intra‐ and inter‐enterprise system performance along the path of the technology–product development life cycle. A notion is advanced about the readiness of SMMs with respect to assessment, improvement, and sustainability of intra‐ and inter‐enterprise system performance. A road map is outlined for the deployment of a methodology to address the issues across the supply chain. © 2007 Wiley Periodicals, Inc.     

Neutrophil Count as Atrioventricular Block (AVB) Predictor following Pediatric Heart Surgery

Neutrophils play a significant role in immune and inflammatory reactions. The preoperative inflammatory activation may have a detrimental effect on postoperative outcomes. The aim of the study was to investigate the relation between preoperative hematological indices on postoperative complications’ risk in pediatric cardiac congenital surgery. The retrospective single center analysis included 93 pediatric patients (48 (65%) males and 45 (35%) females), mean age of 7 (3–30) months referred for cardiac surgery in cardiopulmonary bypass due to functional single ventricle disease (26 procedures), shunts lesions (40 procedures) and cyanotic disease (27 procedures). Among simple hematological indices, the receiver-operating-characteristic curve showed that a neutrophil count below 2.59 K/uL was found as an optimal cut-off point for predicting postoperative atrioventricular block following pediatric cardiac surgery (AUC = 0.845, p < 0.0001) yielding a sensitivity of 100% and a specificity of 65.62%. Preoperative values of neutrophil count below 2.59 K/uL in whole blood analysis can be regarded as a predictive factor (AUC = 0.845, p < 0.0001) for postoperative atrioventricular block in pediatric cardiac surgery.     

SARS-CoV-2 Altered Hemorheological and Hematological Parameters during One-Month Observation Period in Critically Ill COVID-19 Patients

Hematological and hemorheological parameters are known to be altered in COVID-19; however, the value of combined monitoring in order to deduce disease severity is only scarcely examined. A total of 44 acute SARS-CoV-2-infected patients (aCOV) and 44 age-matched healthy controls (Con) were included. Blood of aCOV was sampled at admission (T0), and at day 2 (T2), day 5 (T5), day 10 (T10), and day 30 (T30) while blood of Con was only sampled once. Inter- and intra-group differences were calculated for hematological and hemorheological parameters. Except for mean cellular volume and mean cellular hemoglobin, all blood cell parameters were significantly different between aCOV and Con. During the acute disease state (T0–T5), hematological and hemorheological parameters were highly altered in aCOV; in particular, anemic conditions and increased immune cell response/inflammation, oxidative/nitrosative stress, decreased deformability, as well as increased aggregation, were observed. During treatment and convalescence until T30, almost all abnormal values of aCOV improved towards Con values. During the acute state of the COVID-19 disease, the hematological, as well as the hemorheological system, show fast and potentially pathological changes that might contribute to the progression of the disease, but changes appear to be largely reversible after four weeks. Measuring RBC deformability and aggregation, as well as oxidative stress induction, may be helpful in monitoring critically ill COVID-19 patients.     

Spectroscopic Characterization and Biological Activity of Hesperetin Schiff Bases and Their Cu(II) Complexes

The three Schiff base ligands, derivatives of hesperetin, HHSB (N-[2,3-dihydro-5,7-dihydroxy-2-(3-hydroxy-4-methoxyphenyl)chromen-4-ylidene]isonicotinohydrazide), HIN (N-[2,3-dihydro-5,7-dihydroxy-2-(3-hydroxy-4-methoxyphenyl)chromen-4-ylidene]benzhydrazide) and HTSC (N-[2,3-dihydro-5,7-dihydroxy-2-(3-hydroxy-4-methoxyphenyl)chromen-4-ylidene]thiosemicarbazide) and their copper complexes, CuHHSB, CuHIN, and CuHTSC were designed, synthesized and analyzed in terms of their spectral characterization and the genotoxic activity. Their structures were established using several methods: elemental analysis, FT-IR, UV-Vis, EPR, and ESI-MS. Spectral data showed that in the acetate complexes the tested Schiff bases act as neutral tridentate ligand coordinating to the copper ion through two oxygen (or oxygen and sulphur) donor atoms and a nitrogen donor atom. EPR measurements indicate that in solution the complexes keep their structures with the ligands remaining bound to copper(II) in a tridentate fashion with (O^–, N, O_ket) or (O^–, N, S) donor set. The genotoxic activity of the compounds was tested against model tumour (HeLa and Caco-2) and normal (LLC-PK1) cell lines. In HeLa cells the genotoxicity for all tested compounds was noticed, for HHSB and CuHHSB was the highest, for HTSC and CuHTSC–the lowest. Generally, Cu complexes displayed lower genotoxicity to HeLa cells than ligands. In the case of Caco-2 cell line HHSB and HTSC induced the strongest breaks to DNA. On the other side, CuHHSB and CuHTSC induced the highest DNA damage against LLC-PK1.