Automatic recognition fingerspelling gestures in multiple languages for a communication interface for the disabled

This paper presents the design and evaluation of a multi-lingual fingerspelling recognition module that is designed for an information terminal. Through the use of multimodal input and output methods, the information terminal acts as a communication medium between deaf and blind people. The system converts fingerspelled words to speech and vice versa using fingerspelling recognition, fingerspelling synthesis, speech recognition and speech synthesis in Czech, Russian, and Turkish languages. We describe an adaptive skin color based fingersign recognition system with a close to real-time performance and present recognition results on 88 different letters signed by five different signers, using above four hours of training and test videos.     

The role of plasticizer on the exfoliation and dispersion and fracture behavior of clay particles in PVC matrix: a comprehensive morphological study

The clay nanoparticles are readily dispersed and exfoliated in the PVC matrix with the help of Dioctyl phthalate (DOP) plasticizer. X-ray, TEM and AFM analysis of the nanocomposites indicate that there is an optimum concentration of DOP for the process. If used in high concentrations, the ability to transfer forces to the clay particles through the polymer matrix decreases due to substantial decrease in viscosity. The individual platy montmorillonite particles dispersed in PVC matrix were directly observed by AFM and found to lie preferentially on their basal surfaces, especially when the compounded batch is compression molded. The edges of the particles were in some cases straight forming hexagonal angles and in other cases irregular.     

Mathematical modelling of sound transmission loss performances of different coloured surfaces coated with polyurethane-based paint

ABSTRACT

The aim of this study is to investigate the effect of morphologies and the structure of polyurethane-based coatings created by different colour pigments, on sound transmission loss properties. To achieve this goal, coatings were created in different concentrations of 5%, 7% and 9% with red, green, orange and yellow pigments. The coatings were applied on glass surfaces and the sound transmission loss was measured by an experimental arrangement containing a microphone and a decibel meter. The effect of surface tension energy, surface roughness, reflection percentages and concentration of pigments were found to be negligible on the sound transmission loss, whereas the LAB colour codes have a determining effect. In the scope of this study, a new method and mathematical model were created to help measure the sound transmission loss on a surface, in which sound signal was carried with a laser beam via a system created in the laboratory.     

Optical sensing of biomolecules using microring resonators

A biosensor application of vertically coupled glass microring resonators with Q/spl sim/12 000 is introduced. Using balanced photodetection, very high signal to noise ratios, and thus high sensitivity to refractive index changes (limit of detection of 1.8/spl times/10/sup -5/ refractive index units), are achieved. Ellipsometry and X-ray photoelectron spectroscopy results indicate successful modification of biosensor surfaces. Experimental data obtained separately for a bulk change of refractive index of the medium and for avidin-biotin binding on the ring surface are reported. Excellent repeatability and close-to-complete surface regeneration after binding are experimentally demonstrated.     

Controller design and performance evaluation for deadlock avoidance in automated flexible manufacturing cells

In this paper, the design of a deadlock avoidance controller is described. The uncontrolled system is modeled using colored Petri nets. The system controller is based on a restrictive (not maximally permissive) deadlock avoidance policy to resolve deadlocks and control the real-time resource allocation decisions in the system. Performance evaluation of systems controlled by not maximally permissive algorithms is essential in determining the applicability and effectiveness of the control algorithms. The performance of the controlled system is compared with performance of optimal control policies to quantify the effects of the restrictiveness of the deadlock avoidance policy on system performance.     

Utilization of Whey and Grape Must for Citric Acid Production by Two Yarrowia lipolytica Strains

In this study, utilization of whey and grape must were investigated for citric acid production using Yarrowia lipolytica NBRC 1658 and a domestic strain Y. lipolytica 57. In addition to its use as a sole nutrient source, whey was also fortified with glucose or fructose as well as other nutrients. The best results for citric acid production were obtained in the medium containing whey supplemented with fructose. Maximum citric acid concentrations in this medium were 49.23 and 32.65 g/L for the domestic and NBRC 1658 strains, respectively. In grape must, maximum citric acid concentrations obtained using domestic and NBRC 1658 strains were 32.09 and 10.39 g/L, respectively. Both of the natural nutrient sources were found to be promising for utilization in citric acid production process. A domestic Turkish yeast strain was confirmed to be superior for citric acid production for the first time. This can be targeted for enhancing citric acid production efficiencies from locally available substrates such as whey or grape must.     

Influence of the harvesting year and fertilizer on the fatty acid composition and some physicochemical properties of linseed (Linum usitatissimum L.)

Sar? 85 (Linum usitatissimum L.) linseed variety was used in this study. Linseed was cultivated at 2008 (LS-08) and 2009 (LS-09) without fertilizer. In addition, at 2009 diammonium phosphate [(NH₄)₂HPO₄] and ammonium nitrate (NH₄NO₃) were applied (LSF-09). The linseeds were analyzed for protein, ash and oil contents and fatty acid compositions. There were differences among harvesting years for oil, protein and ash contents of the seeds. The greater oil and protein contents were obtained during LS-08 compared with LS-09. There were no significant difference in protein and ash content between LS-09 and LSF-09 while a significant difference was observed in oil content. Seed protein, oil and ash contents were significantly affected by the harvesting year, but only oil content was affected by the fertilizer treatment. There are significant differences in palmitic, stearic, oleic, ??-linolenic and arachidic acid between LS-08 and LS-09. While palmitic, stearic, oleic acid decreased, ??-linolenic and arachidic acid increased during 2009 harvesting year. LSF-09 has the highest amount of ??-linolenic acid. The fertilizing treatment seems to have an increasing effect on the amount of ??-linolenic acid, while it has a decreasing effect on the oleic acid content.     

Characterization of closed-loop measurement accuracy in precision CNC milling

This study investigates the closed-loop measurement error in computer numerical controlled (CNC) milling as they relate to the different inspection techniques. The on-line inspection of machining accuracy using a spindle probe has an inherent shortcoming because the same machine-produced parts are used for inspection. In order to use the spindle probe measurement as a means of correcting deviations in machining, the magnitude of measurement errors needs to be quantified. The empirical verification was made by conducting three sets of cutting experiments, followed by a design of experiment with three levels and three factors on a state-of-the-art CNC machining center. Three different material types and parameter settings were selected to simulate a diverse cutting condition. During the cutting, the cutting force and spindle vibration sensor signals were collected and a tool wear was recorded using a computer vision system. The bore tolerance was gauged by a spindle probe as well as a coordinate-measuring machine. The difference between the two measurements was defined as a closed-loop measurement error and the subsequent analysis was performed to determine the significant factors affecting the errors. The analysis results showed the potential of improving production efficiency and improved part quality.     

Using Tag-Match Comparators for Detecting Soft Errors

Soft errors caused by high energy particle strikes are becoming an increasingly important problem in microprocessor design. With increasing transistor density and die sizes, soft errors are expected to be a larger problem in the near future. Recovering from these unexpected faults may be possible by reexecuting some part of the program only if the error can be detected. Therefore it is important to come up with new techniques to detect soft errors and increase the number of errors that are detected. Modern microprocessors employ out-of-order execution and dynamic scheduling logic. Comparator circuits, which are used to keep track of data dependencies, are usually idle. In this paper, we propose various schemes to exploit on-chip comparators to detect transient faults. Our results show that around 50% of the errors on the wakeup logic can be detected with minimal hardware overhead by using the proposed techniques.