Chemical potentials of oxygen for three-phase assemblages of CaSiO3(s) + Ca3Si2O7(s) + {CaO + SiO2 + FexO} melt and Ca3Si2O7(s) + Ca2SiO4(s) + {CaO + SiO2 + FexO} melt

By employing an electrochemical technique involving stabilized zirconia as solid electrolyte and Mo + MoO₂ mixture as reference electrode, the equilibrium oxygen partial pressures for three-phase assemblages of CaSiO₃(s) + Ca₃Si₂O₇(s) + {CaO + SiO₂ + Fe_xO} melt and Ca₃Si₂O₇(s) + Ca₂SiO₄(s) + {CaO + SiO₂ + Fe_xO} melt were determined as: - log {P_O2 (CS + C₃S₂ + L)/bar} = - 3.22 13000/(T/K) ± 0.05 - log {P_O2 (C₃S₂ + C₂S + L)/bar} = - 0.92 16400/ (T/K) ± 0.04. respectively, where CS, C₃S₂ and C₂S indicate CaSiO₃(s), Ca₃Si₂O₇(s). and Ca₂SiO₄(s), respectively.     

Carbonization of coals into anisotropic cokes: 7. Copreheat-treatment under short contact-time conditions at high temperature

The copreheat-treatment of non-fusible and slightly fusible coals with A240 and hydrogenated A240 under high temperature-short contact-time conditions around 500 °C has been examined in an attempt to produce a formed coke with better anisotropic development. These conditions shortened the copreheat-treatment time and provided better anisotropic development in the resultant coke after carbonization. Effectiveness of short contact-time has been discussed in terms of the extent of depolymerization of coal molecules suitable for anisotropic development, this being related to coal liquefaction under similar conditions.     

Control of Wind-Induced Self-Excited Oscillations by Transfer of Internal Energy to Higher Modes of Vibration. II: Application to Taut Cables

In Part I of this paper, a theoretical basis is presented using a two-degrees-of-freedom model. In this second part of the study, the passive control and the two types of semiactive controls introduced in Part I are examined numerically for a taut cable experiencing wind-induced galloping motion. The passive and the semiactive control schemes for taut cables show a good similarity with the results obtained for the two-degrees-of-freedom model. The potential of using these control schemes in practical applications to flexible structures is demonstrated.     

ILU factorization well suited to the vector processor using a variant of the 5-point difference scheme

The implementation on the vector processor of Incomplete LU factorization in the Preconditioned Conjugate Gradient method and other Preconditioned CG-like methods for the numerical solutions of the partial differential equations is discussed. For sufficient vectorization, a variant of the standard 5-point difference scheme for 2-dimensional problems is introduced. The convergence property of ILU factorization for this variant is examined in comparison with that vectorized with the usual hyperplane ordering method for the standard 5-point difference scheme on the vector processor. The efficiency and effectiveness of this factorization for the variant of the difference scheme is demonstrated through several computational experiments.     

Modification of mesophase pitch by blending Part 2 Modification of mesophase pitch fibre precursor with thermoresisting polyphenyleneoxide (PPO)

Polyphenyleneoxide was blended in amounts of 5 or 10 wt% into petroleum-derived mesophase pitch to reinforce the pitch fibre before the oxidative stabilization to achieve better handling properties. Although polyphenyleneoxide was fusible but hardly soluble in the mesophase pitch even at a spinning temperature of 350° C, blended pitch could be smoothly spun into pitch fibre 10m diameter, as could the parent pitch. Fibrous polyphenyleneoxide of less than 1m diameter was homogeneously dispersed in the pitch fibre, being arranged along the fibre axis. Such fibrous polyp henyleneoxide reinforced the pitch fibre considerably. The fibrous substances at the centre of the fibre disappeared in the carbonized fibre at 1300° C after oxidation at 250° C, although some short ones were observed in the skin region of the fibre, suggesting that polyphenyleneoxide was co-carbonized to be assimilated with mesophase pitch at the centre of the fibre, where the effects of oxidation may be rather limited. The oxidation reactivity and its mechanical strength after carbonization were slightly lower in comparison with those of the parent mesophase pitch.     

EDM-Lathe for Micromachining

In this paper a new type of micro-EDM machine is proposed. The machine operates similarly to a turning lathe. An electrode fabrication system is installed which makes it possible to fabricate on-the-machine complex microelectrodes with sharp edges and corners. A prototype set of equipment was realized and test machining proved that a machine of this type can produce microcylindrical, overhung cavities, or cylindrical microholes with larger internal diameters than the entrance diameter. This result reveals the possibility of fabrication of various microparts such as microball bearings.     

Carbonization of coals to produce anisotropic cokes. 1. Modifying activities of some additives in the co-carbonization of low-rank coals

Using low-rank coals, the modifying activities of some petroleum, coal tar and aromatic hydrocarbon additives have been examined to find procedures for their utilization in the preparation of blast furnace coke. Petroleum pitch, especially after hydrogenation, exhibited excellent modifying activity even with non-fusible coals. In contrast, the activity of coal tar was very limited with such coals. The napththenic component, revealed by n.m.r. of the additives, appears to be important in the co-carbonization by inducing fusibility and anisotropic development in such coals. Co-carbonization to recover the dehydrogenated additives was attempted. However, there was no development of the anisotropy in the resultant coke by dissolution of the coal particles although the coal particles were firmly fixed in the matrix. Acid-refluxing treatment of non-fusible coals was found to enhance their modification susceptibility, indicating that some of the acid-soluble mineral matter is important in the thermal depolymerization or fusion process of the coal.     

Aspects of gasification and structure in cokes from coals

Cokes were prepared from nine coals of different rank and characterized by surface area measurement, reactivity to carbon dioxide at 1473K and Raman-laser spectroscopy. Rates of gasification of cokes on a unit surlface area basis (K¹ = g m^?2 min^?1) decreased with increasing rank of parent coal based on maximum oil reflectances. However rates of gasification could not be related to coke structure as measured by Raman-laser spectroscopy.     

Liquefaction of subbituminous coals under apparently non-hydrogenative conditions

Reactivities of several coals of different ranks have been examined in degrading extractions with aromatic solvents under apparently non-hydrogenative reaction conditions. Pyrene and A240 pitch liquefied the fusible coals in high yields and the slightly-fusible coals in moderate yields, indicating the importance of fusibility in such liquefaction processes. A240-LS pitch is a powerful solvent for slightly-fusible coals. Considerable amounts of pyridine- or THF-soluble fractions were produced especially with A240-LS pitch. A240 pitch is a better solvent than pyrene for some slightly-fusible coals. However, the extent of depolymerization of liquefied coal, pyridine- or THF-solubility, was definitely inferior. Yields of such fractions are higher for lower-rank coals. The mechanism of coal liquefaction under apparently non-hydrogenative conditions is discussed with emphasis on the stabilization of thermal fragments derived from the coal.