Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.     

Problem pharmaceutical patents

These days, the number of pharmaceutical patent applications which do not specify the principal active ingredient in the form of a chemical name or structure is increasing. These patents are difficult to retrieve in retrospective on-line searches using chemical structures or keywords. Furthermore, even if you could find them, the situation with regard to patentability is obscure and this causes considerable problems for the experts in charge of the patent search. If you are a searcher for a large pharmaceutical company, you might already be apprehensive of infringing such patents. We, the JFA,^* gathered these patents together and studied the differences between their patentability in Japan, the US and the EPO.     

Synthesis and properties of N,N'-unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s

N,N'- Unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s (in which alkyl = methyl, ethyl, propyl, butyl, isobutyl, pentyl, hexyl and octyl) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with the appropriate alkyl-amines. The properties of these derivatives as pigments were tested and their thermal stability measured.     

Synthesis and properties of N-alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide)

N′-Alkyl-N′-aryl-3,4:9,10-perylenebis(dicarboximide) (alkyl = isobutyl, pentyl, hexyl, octyl, etc.; aryl = phenyl, p-tolyl, p-methoxyphenyl, etc.) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with arylamines (aniline, p-toluidine, p-anisidine, o-phenylenediamine, etc.). The properties of these derivatives as pigments were tested, and also the thermal stability of 3,4:9,10-perylenebis(dicarboximide) derivatives was measured.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

Quantum Statistics of Three-Dimensional Vortex Filament in Superfluid 4He

The quantum statistics of three-dimensional vortex filament in superfluid ⁴ He is investigated by the use of path integral techniques. The free energy evaluated in the saddle point approximation decreases abruptly at a certain critical value of the applied superflow velocity. This critical behavior is in quantitative agreement with the experimental result of vortex nucleation by a moving ion. The dissipation effects are also discussed within the damped harmonic oscillator approximation.     

Channel Thickness Dependence of the Magnetic Properties in (Ga,Mn)As FET Structures

We have fabricated a series of field-effect transistor structures with a thin (Ga,Mn)As channel with thickness t of 3.5, 4.0, 4.5, and 5.0 nm, and investigated the effect of electric-field E on their magnetic properties. The Curie temperature T _C showed a clear dependence on the magnitude of E, and its controllable range became larger with decreasing t and reached 15 K for the device with t=3.5 nm, which corresponded to 32% of T _C of the layer.     

Ferromagnetic Semiconductor Heterostructures for Spintronics

Ferromagnetism in transition-metal-doped III-V and II-VI compound semiconductors and their heterostructures allow exploration of unprecedented possibilities, in which spin degrees of freedom and more common charge degrees of freedom are combined. These include quantum heterostructures that incorporate ferromagnetism, electric field as well as light control of ferromagnetism, and magnetization reversal by electrical means. Possibilities of achieving high ferromagnetic-transition temperature are also discussed