Characterization of anisotropic gas permeability and thermomechanical properties of highly textured porous alumina

Porous alumina with a highly textured microstructure was fabricated by pulse electric current sintering (PECS) using alumina platelets. Highly oriented porous alumina with a porosity of 3%–50% was obtained by a pressure-controlled method of PECS. The properties of the highly textured porous alumina were measured in two directions. The nitrogen gas permeance and thermal conductivity at room temperature were higher in the direction along the platelet length due to the higher continuity of pores and the connectivity of alumina platelets, respectively. The anisotropy of the thermal conductivity at room temperature was investigated and explained by the effect of grain size of platelets as well as morphology and orientation of pores. The bending strength was higher with the loading direction along the platelet thickness. The thermal shock strength was clearly different in the two directions. The difference in the thermal shock strength was investigated by the measurement of properties and thermal stress analysis.     

Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

Non-atherosclerotic acute myocardial infarction

AIM: The aim of the study is to analyse the benefits and risks of PEE in patients, cared for by a team with many years experience. PATIENTS AND METHODS: From 16. 2. 1988 until 31. 12. 1993 246 PEEs (229 gastrostomies, 6 duodenostomies, 7 jejunostomies, 4 attempts) were performed on 234 patients (56% male, 44% female, mean age 68.3 years). 117 patients had tumorous and 117 neurological diseases. We used the pull technique with the Fresenius Freka PEG-system. Analysis was performed using a standardised documentation sheet which was filled out until the end of tube feeding. In total, we registered 39,678 days of tube feeding, 4513 of which were in hospitalized patients. RESULTS: The mean intubation time was 192.6 days (maximum 1496). In 8 cases, the tube could be explanted before the patient was discharged; 68 patients were discharged to a nursing home and 71 patients were allowed to go home. The tube-independent hospital lethality was 36.64%. A PEE-specific lethality had not been registered. Complications arose in a total of 37 patients (15.04%), 4 of which were severe (1.63%) Fifty-nine patients (25.43%) reported short-term feelings of ill health (vomiting, diarrhoea, pain). CONCLUSION: PEE is an effective and low-risk method of long-term nutrition. The advantages are simple insertion, safe handling by patients and relatives/nursing staff and the low cost.     

Three-dimensional motion of the upper cervical spine in rheumatoid arthritis

Rheumatoid arthritis frequently contributes to instability of the upper cervical spine. Rotational instability of the upper cervical spine was evaluated in rheumatoid arthritis patients using biplanar x-ray photogrammetry. Three-dimensional cervical motion and the instantaneous axis of rotation of the atlas relative to the axis were evaluated in normal and rheumatoid arthritis patients during axial rotation in the horizontal plane. Anterior atlantoaxial subluxation did not increase during axial head rotation in either the atlantoaxial subluxation or the vertical subluxation groups, while the instantaneous axes of rotation were distributed posteriorly in the dens in the RA-normal group, but were widely scattered in the atlantoaxial subluxation group.     

Successful surgical repair for a patient with atrial septal defect and severe pulmonary hypertension--its surgical indication and prostaglandin E1 use for postoperative pulmonary hypertensive crisis

A 45-year-old woman with atrial septal defect and pulmonary hypertension was admitted for surgical repair. Cardiac catheterization data revealed pulmonary to systemic flow ratio (Qp/Qs) of 1.81, pulmonary artery pressure (PAP) of 82/30 mmHg and pulmonary vascular resistance (PVR) of 10.8 unit. Open lung biopsy was added to evaluate pulmonary vascular obstructive disease (PVOD) which was shown Heath-Edwards grade 3 PVOD. Following closure of the defect, PAP (systolic) exceeded momentarily systemic level after cardiopulmonary bypass. Prostaglandin E1 drip was remarkably effective to bring down PAP during early postoperative period. Although PAP has not been shown significant decrease on catheterization of one year after surgery, great symptomatic improvement has been achieved.     

Fabrication of GaAs quantum wire structure using metal organic molecular beam epitaxy

GaAs quantum wires (100*20 nm/sup 2/) buried in AlAs layers have been successfully fabricated using metal organic molecular beam epitaxy (MOMBE) for the first time. The underlying growth mechanism is that, under appropriate As/sub 4/ pressure in MOMBE, GaAs preferentially grows only on the sidewalls of the patterned     

Temperature and pressure effects on supercritical CO2 extraction of tomato seed oil

Tomato seed oil was extracted with supercritical carbon dioxide in a semibatch-flow extractor within the temperature range 313–343 K and the pressure range 10.8–24.5MPa. The extraction rates increased with pressure, but decreased with temperature increase because of the variation in solvent density and resultant differences in oil solubility. The fatty acid composition of the extracted oil was similar to that of soybean oil.     

Preparation of SiB4±x and SiB6 plates by chemical vapour deposition of SiCl4 + B2H6 system

SiB_4±x and SiB₆ plates were prepared by chemical vapour deposition (CVD) using SiCl₄, B₂H₆ and H₂ gases under the conditions of deposition temperatures (T _dep) from 1323–1773 K, total gas pressures (P _tot) from 4–40 kPa and B/Si source gas ratio (m _B/Si=2B₂H₆/SiCl₄) from 0.2–2.8. The effects of CVD conditions on the morphology, structure and composition of the deposits were examined. High-purity and high-density SiB_4±x and SiB₆ plates about 1 mm thick were obtained at the deposition rates of 71 and 47 nm s⁻¹, respectively. The lattice parameter, composition and density of CVD SiB_4±x plates were dependent on their non-stoichiometry. The lattice parameter,a, was 0.6325 nm, butc ranged from 1.262–1.271 nm.The B/Si atomic ratio ranged from 3.1–5.0, and the density ranged from 2.39–2.45×10³ kg m⁻³. The CVD SiB₆ plates showed constant values of lattice parameters (a=1.444 nm,b=1.828 nm,c=0.9915 nm), composition (B/Si=6.0) and density (2.42×10³ kg m⁻³), independent of CVD conditions.