This paper presents a new circuit topology of millimetre-wave quadrature voltage-controlled oscillator (QVCO) using an improved Colpitts oscillator without tail bias. By employing an extra capacitance between the drain and source terminations of the transistors and optimising circuit values, a low-power and low-phase-noise (PN) oscillator is designed. For generating the output signals with 90° phase difference, a self-injection coupling network between two identical cores is used. The proposed QVCO dissipates no extra dc power for coupling, since there is no dc-path to ground for the coupled transistors and no extra noise is added to circuit. The best figure-of-merit is ?188.5, the power consumption is 14.98–15.45 mW, in a standard 180-nm CMOS technology, for 58.2 GHz center frequency from 59.3 to 59.6 GHz. The PN is ?104.86 dBc/Hz at 1-MHz offset. 相似文献
Antigens incorporated in subunit vaccines are typically poorly immunogenic, so a strong immunostimulant (adjuvant) and/or delivery system is required to boost immunogenicity. In this work, the various functional polymer nanostructures, that is, rods, worms, spheres, and tadpoles are used to develop potent peptide antigen delivery systems. The antigen PADRE-J8 (PJ8), derived from Group A Streptococcus (GAS) M-protein, is either physically mixed or chemically conjugated to polymeric nanoparticles of different shapes. The physical mixture of polymeric nanoparticles and antigen is more effective in inducing antibody production than their chemical conjugates. Moreover, rod-shaped polymeric nanoparticles in physical mixture with PJ8 elicited higher and more opsonic antibody titers than powerful complete Freund's adjuvant (CFA)-adjuvanted antigen. Herein, for the first time it is demonstrated that a) the block copolymer, in nanoparticle form, can act as an immune adjuvant, b) nanoparticle shape plays a crucial role in their immunogenicity, and c) antigen conjugation is not required, nor is antigen encapsulation or absorption. 相似文献
Melamine and melamine resins are widely used as fire retardants for polymer materials used in pharmaceutical, plastic, textile, rubber, and construction industry. Melamine-based flame retardants act by blowing off intumescent layers, char formation, and emission of quenching ammonia gas and diluent molecular nitrogen. Special advantages are: low cost, low smoke density and toxicity, low corrosive activity, safe handling, and environmental friendliness. Methylated poly(melamine-co-formaldehyde) (mPMF) was used as thick (≥40?μm) fire-retardant coating for plasma pretreated polymers. A combined low-pressure plasma pretreatment consisting of oxygen plasma exposure followed by deposition of thin poly(allylamine) (ppAAm) and poly(allyl alcohol) (ppAAl) plasma polymers as adhesion promoters have improved the adhesion of thick mPMF coatings strongly. Chemical structure and composition of deposited polymer films were characterized by infrared-attenuated total reflectance and X-ray photoelectron spectroscopy (XPS). After peeling, the peeled layer surfaces were also investigated for identification of the locus of failure and their topography using optical microscopy and XPS. Often the adhesion promotion was so efficient that the peeling of coating was not possible. Thermal properties of plasma polymers and dip-coating films were analyzed by thermogravimetric analysis. Significant improvement of fire-retardant properties of coated polymers was confirmed by flame tests. 相似文献
Objectives: To investigate the effect of different self-etch adhesive systems application techniques: active or passive in a single or double layer on adhesive–dentin microshear bond strength.
Methods: Occlusal surfaces of 48 extracted human molars were ground to expose flat superficial dentin surfaces. Specimens were randomly divided into two main groups according to the tested self-etch adhesive system either: One-step self-etch (AdperTM easy-one) or two-step self-etch (AdperTM SE Plus). Each adhesive system was applied on the prepared dentin surfaces followed one of these techniques: (1) Passive application of a single layer, (2) Active application of single layer, (3) Passive application of double adhesive layer (with light curing in between), and (4) Active application of double adhesive layers. Resin composite was packed inside micro-tubes fixed on the bonded dentin surfaces and light cured for 40 s. All specimens were stored in artificial saliva either for 24 h or 3 months before testing. Microshear bond strength test was employed using a universal testing machine at a crosshead speed of 0.5 mm/min.
Results: AdperTM SE Plus showed higher significant microshear bond strength in compared with AdperTM easy-one. For both adhesive systems active application showed higher significant microshear bond strength to dentin than passive application. Double application of adhesive systems showed lower microshear bond strength than single application.
Conclusion: Active application of self-etch adhesives could improve the dentin microshear bond strength. Double application with curing in between the layers did not improve the bond strength to the tested adhesive. 相似文献
The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd+ Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution of PdNi nanoparticles, and lower dissociation and desorption barriers. Comparison of the catalysts synthesized by MIL-101(Cr) and MIL-101-NH2(Cr) as the supports of metals showed that Pd/MIL-101-NH2(Cr) outperforms Pd/MIL-101-(Cr) because of the higher electron density of Pd resulting from the electron donor ability of the NH2 functional group. However, the same activities were observed for Pd70Ni30/MIL-101(Cr) and Pd70Ni30/MIL-101-NH2(Cr), which is due to a less uniform distribution of Pd nanoparticles in Pd70Ni30/MIL-101-NH2(Cr) originated from amorphization of MIL-101-NH2(Cr) structure during the reduction process. In contrast, Pd70Ni30/MIL-101(Cr) revealed the stable structure and activity during reduction and CO oxidation for a long time. 相似文献
One of the most important reactions in organic synthesis is Ullmann-type C–N coupling reaction which has been used for preparation of numerous biologically active compounds. In this work, CuI immobilized on tricationic ionic liquid anchored on functionalized magnetic hydrotalcite (Fe3O4/HT-TIL-CuI) has been successfully prepared and fully characterized by different techniques, including fourier-transform infrared spectroscopy, vibrating sample magnetometer, thermo gravimetric analysis, transmission electron microscopy, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, elemental mapping, zeta potential, X-ray diffraction, temperature programmed desorption of ammonia (NH3-TPD), temperature-programmed reduction and inductively coupled plasma. The results showed that the as-prepared nanocatalyst possesses plate-like morphology with approximate size of 50 nm and superparamagnetic behavior. Also, total acidity and total hydrogen consumption of the nanocatalyst were measured to be 8.5 and 1.41 mmol g?1, respectively. This nanocatalyst exhibited favorable performance for C–N coupling reaction among a variety of aryl halides and N(H)-heterocycles (benzimidazoles, pyrazoles and triazoles) in the presence of 2.5 mol% of nanocatalyst without any additives under air atmosphere revealing high yields in all cases. Besides, it is noted that in the present system the desired product can be easily and quickly isolated and nanocatalyst also recovered magnetically from the reaction mixture employing a permanent magnet for at least six consecutive trials without a discernible decrease in catalytic activity which makes the proposed methodology appropriate for industrial. The findings demonstrated the advantages of the present method as no need for neutral atmosphere, appropriate times, recyclability of the catalyst, broad substrate scope, minimization of chemical waste, simple purification of products, easy workup process, and high yields.
A simple and sensitive electrochemical sensor based on nickel oxide nanoparticles/riboflavin-modified glassy carbon (NiONPs/RF/GC) electrode was constructed and utilized to determine H2O2. By immersing the NiONPs/GC-modified electrode into riboflavin (RF) solution for a short period of time (5–300 s), a thin film of the proposed molecule was immobilized onto the electrode surface. The modified electrode showed stable and a well-defined redox couples at a wide pH range (2–10), with surface-confined characteristics. Experimental results revealed that RF was adsorbed on the surface of NiONPs, and in comparison with usual methods for the immobilization of RF, such as electropolymerization, the electrochemical reversibility and stability of this modified electrode has been improved. The surface coverage and heterogeneous electron transfer rate constants (ks) of RF immobilized on a NiOx–GC electrode were approximately 4.83 × 10?11 mol cm?2, 54 s?1, respectively. The sensor exhibits a powerful electrocatalytic activity for the reduction of H2O2. The detection limit, sensitivity and catalytic rate constant (kcat) of the modified electrode toward H2O2 were 85 nM, 24 nA μM?1 and 7.3 (±0.2) × 103 M?1 s?1, respectively, at linear concentration rang up to 3.0 mM. The reproducibility of the sensor was investigated in 10 μM H2O2 by amperometry, the value obtained being 2.5 % (n = 10). Furthermore, the fabricated H2O2 chemical sensor exhibited an excellent stability, remarkable catalytic activity and reproducibility. 相似文献
Silicon - This paper proposes a new silicon on nothing lateral double-diffused metal-oxide-semiconductor with two air gaps in the gate insulator (SON-APG LDMOS). Utilizing air for the buried layer... 相似文献