Multiwalled Nanotubes: Their Formation by Irradiating Graphite with High Doses of Electrons

We report the production of carbon nanotubes by high dose of electron irradiation. The irradiation was performed with a 2 MeV Van de Graaff accelerator, while the irradiation conditions were the following: voltage 1.3 MeV, current 5 µA, dose rate 25 kGy/min, and total dosage 1000 kGy. The samples were analyzed in a high-resolution transmission electron microscope. The main features observed on the samples, were huge nanotubes of several nanometer long and few nanometer wide, which are capped at one end. It is good to point out, that at this level of irradiation, we were not able to find either onion-like or particle structures throughout the material, as it is usual in similar hexagonal structures. This behavior could be attributed to the level of irradiation used to create the nanotubes under investigation.     

Visceral Adipose Tissue Displays Unique Metabolomic Fingerprints in Obesity,Pre-Diabetes and Type 2 Diabetes

Visceral adipose tissue (VAT) metabolic profiling harbors the potential to disentangle molecular changes underlying obesity-related dysglycemia. In this study, the VAT exometabolome of subjects with obesity and different glycemic statuses are analyzed. The subjects (n = 19) are divided into groups according to body mass index and glycemic status: subjects with obesity and euglycemia (Ob+NGT, n = 5), subjects with obesity and pre-diabetes (Ob+Pre-T2D, n = 5), subjects with obesity and type 2 diabetes under metformin treatment (Ob+T2D, n = 5) and subjects without obesity and with euglycemia (Non-Ob, n = 4), used as controls. VATs are incubated in culture media and extracellular metabolite content is determined by proton nuclear magnetic resonance (¹H-NMR). Glucose consumption is not different between the groups. Pyruvate and pyroglutamate consumption are significantly lower in all groups of subjects with obesity compared to Non-Ob, and significantly lower in Ob+Pre-T2D as compared to Ob+NGT. In contrast, isoleucine consumption is significantly higher in all groups of subjects with obesity, particularly in Ob+Pre-T2D, compared to Non-Ob. Acetate production is also significantly lower in Ob+Pre-T2D compared to Non-Ob. In sum, the VAT metabolic fingerprint is associated with pre-diabetes and characterized by higher isoleucine consumption, accompanied by lower acetate production and pyruvate and pyroglutamate consumption. We propose that glucose metabolism follows different fates within the VAT, depending on the individuals’ health status.     

Genetic Contribution of Endometriosis to the Risk of Developing Hormone-Related Cancers

Endometriosis is a common gynecological disorder that has been associated with endometrial, breast and epithelial ovarian cancers in epidemiological studies. Since complex diseases are a result of multiple environmental and genetic factors, we hypothesized that the biological mechanism underlying their comorbidity might be explained, at least in part, by shared genetics. To assess their potential genetic relationship, we performed a two-sample mendelian randomization (2SMR) analysis on results from public genome-wide association studies (GWAS). This analysis confirmed previously reported genetic pleiotropy between endometriosis and endometrial cancer. We present robust evidence supporting a causal genetic association between endometriosis and ovarian cancer, particularly with the clear cell and endometrioid subtypes. Our study also identified genetic variants that could explain those associations, opening the door to further functional experiments. Overall, this work demonstrates the value of genomic analyses to support epidemiological data, and to identify targets of relevance in multiple disorders.     

Microwave-Assisted Fabrication of Superamphiphobic Surfaces on Aluminum Substrates

The field of superamphiphobic surface fabrication has evolved rapidly in the last decade; however, research on important issues such as sustainability and green chemistry procedures is still scarce. Herein, a simple method of microwave irradiation (MW) to minimize energy consumption during the preparation of superamphiphobic aluminum (Al) surfaces is reported. Al substrates are first etched in diluted HCl solutions to generate a microstructure and then irradiated in a commercial microwave unit for several time intervals, temperatures, and pressures. The surfaces are then coated with different compounds, and the wettability is tested with high and very-low surface tension liquids. Optical profilometry and scanning electron microscopy images show that the density of hierarchical micro-nanostructures increases with MW time, temperature, and pressure. At 170 °C and 7.9 bar, the surfaces present a high density of structures and re-entrant topographies. The obtained coatings display excellent repellence to liquids with surface tensions as low as 27.5 mN m⁻¹. X-ray photoelectron spectroscopy data show the importance of efficient surface functionalization for the production of superamphiphobicity in Al substrates. The results show that MW irradiation of Al substrates can be a green and efficient method for fabricating superamphiphobic surfaces.     

The Optimal Concentration of Nanoclay Hydrotalcite for Recovery of Reactive and Direct Textile Colorants

Concerns about the health of the planet have grown dramatically, and the dyeing sector of the textile industry is one of the most polluting of all industries. Nanoclays can clean dyeing wastewater using their adsorption capacities. In this study, as a new finding, it was possible to analyze and quantify the amount of metal ions substituted by anionic dyes when adsorbed, and to determine the optimal amount of nanoclay to be used to adsorb all the dye. The tests demonstrated the specific amount of nanoclay that must be used and how to optimize the subsequent processes of separation and processing of the nanoclay. Hydrotalcite was used as the adsorbent material. Direct dyes were used in this research. X-ray diffraction (XRD) patterns allowed the shape recovery of the hydrotalcite to be checked and confirmed the adsorption of the dyes. An FTIR analysis was used to check the presence of characteristic groups of the dyes in the resulting hybrids. The thermogravimetric (TGA) tests corroborated the dye adsorption and the thermal fastness improvement. Total solar reflectance (TSR) showed increased radiation protection for UV-VIS-NIR. Through the work carried out, it has been possible to establish the maximum adsorption point of hydrotalcite.     

Effects of the Treatment with Flavonoids on Metabolic Syndrome Components in Humans: A Systematic Review Focusing on Mechanisms of Action

Diets high in bioactive compounds, such as polyphenols, have been used to mitigate metabolic syndrome (MetS). Polyphenols are a large group of naturally occurring bioactive compounds, classified into two main classes: non-flavonoids and flavonoids. Flavonoids are distributed in foods, such as fruits, vegetables, tea, red wine, and cocoa. Studies have already demonstrated the benefits of flavonoids on the cardiovascular and nervous systems, as well as cancer cells. The present review summarizes the results of clinical studies that evaluated the effects of flavonoids on the components of the MetS and associated complications when offered as supplements over the long term. The results show that flavonoids can significantly modulate several metabolic parameters, such as lipid profile, blood pressure, and blood glucose. Only theaflavin and catechin were unable to affect metabolic parameters. Moreover, only body weight and body mass index were unaltered. Thus, the evidence presented in this systematic review offers bases in support of a flavonoid supplementation, held for at least 3 weeks, as a strategy to improve several metabolic parameters and, consequently, reduce the risk of diseases associated with MetS. This fact becomes stronger due to the rare side effects reported with flavonoids.     

How much nitrogen is fixed by biological symbiosis in tropical dry forests? 2. Herbs

Although biological nitrogen fixation (BNF) is considered the main input of N in mature and regenerating native tropical vegetation, it has seldom been quantified. Biomass and N accumulation and fixation were determined for spontaneously occurring herbaceous species in caatinga areas in four regeneration stages (2, 17, 39 and >50?years after abandonment from agricultural use). BNF was estimated using the ¹⁵N natural-abundance method. The 2-year regeneration area had the highest total herb (6,355?kg?ha^?1) and legume (262?kg?ha^?1) biomass production, N stocks (82?kg?ha^?1) and fixed N (5.0?kg?ha^?1). N₂-fixing legumes (nine species in the sampled area) contributed over 97?% of legume biomass in all areas. Macroptilium gracile added the largest amount of N (3.9?kg?ha^?1 in the 2-year regeneration area) because of its large biomass production (205?kg?ha^?1), although it was not the species with the highest proportion of fixed N (76?%). All of the N₂-fixing species obtained large proportions of their N from symbiosis, most of them more than 50?%.However, the amounts of fixed N per unit area were relatively low (0.22?C5.00?kg?ha^?1) because the biomass of N₂-fixing species was always less than 5?% of the total herb biomass.     

Possibility of the application of the computational intelligence in the production of superhard materials. Report 2

A new system to control a 630-ton and a 2500-ton presses has been developed. By using this system it has been made possible to define new parameters related to pressure and temperature and the influence of certain factors on them. Furthermore, the new system has been shown to indicate that other parameters, such as height of the gasket formed (h _c ), electrical resistance of the reaction cell, and the frequency of activation of the pump or multiplier, can serve as important indicators of the improvement of superhard material production technologies, implementing the Computational Intelligence (CI).     

A smartphone-based system for detecting hand tremors in unconstrained environments

The detection of tremors can be crucial for the early diagnosis and proper treatment of some disorders such as Parkinson’s disease. A smartphone-based application has been developed for detecting hand tremors. This application runs in background and distinguishes hand tremors from common daily activities. This application can facilitate the continuous monitoring of patients or the early detection of this symptom. The evaluation analyzes 1770 accelerometer samples with cross-validation for assessing the ability of the system for processing unknown data, obtaining a sensitivity of 95.8 % and a specificity of 99.5 %. It also analyzes continuous data for some volunteers for several days, which corroborated its high performance.