排序方式: 共有46条查询结果,搜索用时 15 毫秒
1.
在切削过程中,球头立铣刀的刀槽承载的应力及其应变对刀具的稳定性与磨损程度有很大的影响。根据球头立铣刀磨削仿真加工系统开发的球头立铣刀三维模型,利用有限元分析ANSYS软件对仿真加工的球头立铣刀进行力学特性分析,可以得到如下结论:当铣削条件不变,磨削加工所用砂轮半径越大,球头立铣刀的最大变形量和最大等效应力都同时增大,二者增长趋势几乎相同,变形量变化幅度要大一些;当磨削砂轮安装偏摆角增加时,球头立铣刀的最大变形量和最大等效应力同时减小,二者的减小幅度出现明显不同,球头立铣刀变形量的减小幅度略大一些。 相似文献
3.
4.
5.
球头立铣刀是加工复杂高精度曲面的重要刀具.在磨削加工球头立铣刀的制造过程中,随着磨削时间的增加,砂轮会出现磨损,球头立铣刀的刃形曲线会随之发生变化.文章以SolidWorks为开发平台,基于球头立铣刀前刀面的磨削加工运动关系,利用Visual Basic语言进行二次开发,开发出球头立铣刀前刀面的磨削仿真加工系统和刀具参数分析系统,分析了砂轮磨损对球头立铣刀刃带宽度和刃形曲线的影响.分析结果可为实际加工过程提供理论指导,有助于制定正确的磨削制造工艺,并为后续制定正确误差补偿策略提供重要指导. 相似文献
6.
7.
Nanocrystalline nickel coatings were prepared by both direct current(DC) and pulse current(PC) jet-electrodeposition. The influences of current density and jet velocity on the surface morphology, microstructure and preferred orientation of the coatings obtained were investigated by SEM, TEM and XRD. It is found that the current density strongly affects the microstructure of the nickel coating. An increase of the DC current density results in a slight increase of the grain size and preferred orientation progressive evolution (i.e. from (111) to (200)), whereas an increase of the PC current density leads to a certain decrease of the grain size and preferred orientation change (i.e. from (111) to a strong (220)). Moreover, jet velocity shows no significant effect on the grain size and preferred orientation for the nanocrystalline coatings obtained in both DC and PC within the range of jet velocity studied. 相似文献
8.
工程素质培养是高等工程教育中的一个重要问题,培养合格的工程技术人才是高等工程教育的核心任务。工程训练中心在承担自身职能的过程中,通过重视工程素质培养,加强工程基本训练,打造"双师型"师资队伍,引导学生参与学科竞赛,构筑工程教育质量保障体系。实践证明,这一模式能够大大提高学生工程素质。 相似文献
9.
10.