3D Micro-PIXE at atmospheric pressure: A new tool for the investigation of art and archaeological objects

The paper describes a novel experiment characterized by the development of a confocal geometry in an external Micro-PIXE set-up. The position of X-ray optics in front of the X-ray detector and its proper alignment with respect to the proton micro-beam focus provided the possibility of carrying out 3D Micro-PIXE analysis. As a first application, depth intensity profiles of the major elements that compose the patina layer of a quaternary bronze alloy were measured. A simulation approach of the 3D Micro-PIXE data deduced elemental concentration profiles in rather good agreement with corresponding results obtained by electron probe micro-analysis from a cross-sectioned patina sample. With its non-destructive and depth-resolving properties, as well as its feasibility in atmospheric pressure, 3D Micro-PIXE seems especially suited for investigations in the field of cultural heritage.     

Synthesis and Pharmacological In Vitro Investigations of Novel Shikonin Derivatives with a Special Focus on Cyclopropane Bearing Derivatives

Melanoma is the deadliest form of skin cancer and accounts for about three quarters of all skin cancer deaths. Especially at an advanced stage, its treatment is challenging, and survival rates are very low. In previous studies, we showed that the constituents of the roots of Onosma paniculata as well as a synthetic derivative of the most active constituent showed promising results in metastatic melanoma cell lines. In the current study, we address the question whether we can generate further derivatives with optimized activity by synthesis. Therefore, we prepared 31, mainly novel shikonin derivatives and screened them in different melanoma cell lines (WM9, WM164, and MUG-Mel2 cells) using the XTT viability assay. We identified (R)-1-(1,4-dihydro-5,8-dihydroxy-1,4-dioxonaphthalen-2-yl)-4-methylpent-3-enyl 2-cyclopropyl-2-oxoacetate as a novel derivative with even higher activity. Furthermore, pharmacological investigations including the ApoToxGlo^TM Triplex assay, LDH assay, and cell cycle measurements revealed that this compound induced apoptosis and reduced cells in the G1 phase accompanied by an increase of cells in the G2/M phase. Moreover, it showed hardly any effects on the cell membrane integrity. However, it also exhibited cytotoxicity against non-tumorigenic cells. Nevertheless, in summary, we could show that shikonin derivatives might be promising drug leads in the treatment of melanoma.     

Tailoring of Surfaces with Ultrathin Layers for Controlled Binding of Biopolymers and Adhesion and Guidance of Cells

Various strategies are described for the bio-functionalization of solid substrates by design of interfacial architectures. The first approach is based on the self-assembly process of long-chain thiol molecules from solution to a (noble) metal surface. If some of these building blocks carry a binding site (ligand) for proteins (receptors, antibodies, etc.) the metal surface can be tailored for maximum specific binding while simultaneously minimizing nonspecific adsorption. The second concept is based on polymers that are covalently attached to (oxide) surfaces. The preparation of these (end-) grafted functional polymers involves either the binding of preformed macromolecules to corresponding sites at the surface of the support or the recently introduced “grafting-from” method, by which an initiator molecule is first covalently bound to the surface and then activated — either by heat or light — in the presence of suitable monomer units such that a polymer chain grows from the solid/solution interface. Finally, the functionalization of patterned surfaces by peptide chains that mimic the binding domains of cell adhesion proteins is summarized. It is demonstrated that not only the selective adhesion of neuronal cells can then be controlled, but also their development with the outgrowth of dendrites and axons.     

Comparison of Formulae for the Determination of Fluorescent and Non–fluorescent Whiteness

The prediction capabilities of simple whiteness formulae based on photometer reflectance readings (A, G, B) as compared to linear formulae with adjustable parameters based on chromaticity values (x, y, Y) have been investigated. For each formula, the instrumentally determined whiteness was compared with visually estimated whiteness using the plates of the Ciba–Geigy Plastic White (CGPW) Scale as a standard. This was carried out for a set of 48 fluorescent cotton cloth samples previously studied, as well as for a new set of 86 non–fluorescent cotton cloth samples. As expected, the AGB formulae were inferior to those based on chromaticity values; however, the Taube formula performed quite well for fluorescent samples. On the set of non–fluorescent samples, a formula having green hue preference was required; the Berger formula was found to be the most successful among the simple AGB formulae.     

In search of trustworthy information: a qualitative study of the search behavior of people with dyslexia in Norway

Universal Access in the Information Society - Access to trustworthy information is a premise for participation in a democratic society. However, locating useful and valid information may not be a...     

The carbon-isotopic composition of Proterozoic carbonates: Riphean successions from northwestern Siberia (Anabar Massif, Turukhansk Uplift)

Thick carbonate-dominated successions in northwestern Siberia document secular variations in the C-isotopic composition of seawater through Mesoproterozoic and early Neoproterozoic (Early to early Late Riphean) time. Mesoproterozoic dolomites of the Billyakh Group, Anabar Massif, have delta 13C values that fall between 0 and -1.9 permil versus PDB, with values in the upper part of the succession (Yusmastakh Formation) consistently higher than those of the lower (Ust'-Il'ya and Kotuikan formations). Consistent with available biostratigraphic and radiometric data, delta 13C values for Billyakh carbonates compare closely with those characterizing early Mesoproterozoic carbonates (about 1600-1200 Ma) worldwide. In contrast, late Mesoproterozoic to early Neoproterozoic limestones and dolomites in the Turukhansk Uplift exhibit moderate levels of secular variation. Only the lowermost carbonates in the Turukhansk succession (Linok Formation) have delta 13C values that approximate Billyakh values. Higher in the Turukhansk succession, delta 13C values vary from -2.7 to +4.6 permil (with outliers as low as -5.0 permil interpreted as diagentically altered). Again, consistent with paleontological and radiometric data, these values compare well with isotopic values from 1200 to 850 Ma successions elsewhere. Five sections measured in different parts of the Turukhansk basin show nearly identical patterns of variation, confirming that carbonate delta 13C correlates primarily with time and not facies. The Siberian sections illustrate the potential of integrated biostratigraphic and chemostratigraphic data in the intra- and interbasinal correlation of Mesoproterozoic and early Neoproterozoic rocks.     

Autonomic information flow improves prognostic impact of task force HRV monitoring

Heart rate variability (HRV) represents the cardiovascular control mediated by the autonomic nervous system and other mechanisms. In the established task force HRV monitoring different cardiovascular control mechanisms can approximately be identified at typical frequencies of heart rate oscillations by power spectral analysis. HRV measures assessing complex and fractal behavior partly improved clinical risk stratification. However, their relationship to (patho-)physiology is not sufficiently explored. Objective of the present work is the introduction of complexity measures of different physiologically relevant time scales. This is achieved by a new concept of the autonomic information flow (AIF) analysis which was designed according to task force HRV. First applications show that different time scales of AIF improve the risk stratification of patients with multiple organ dysfunction syndrome and cardiac arrest patients in comparison to standard HRV. Each group's significant time scales correspond to their respective pathomechanisms.     

Morphology and crack toughness behaviour of nanostructured block copolymer/homopolymer blends

The crack initiation and propagation behaviour of styrene-butadiene (SB) star block copolymer/polystyrene blends (ST3/PS) forming PS-rich and polybutadiene (PB)-rich nanosized domains by self-assembling have been investigated using the essential-work-of-fracture (EWF) approach. Three morphological transitions have been observed, which are crucial to understand the crack toughness behaviour: (i) 0-30 wt.% PS homopolymer: A co-continuous domain structure of PS-rich and PB-rich domains has been observed. For PS homopolymer fraction (?_PS) < 10 wt.% PS homopolymer (i.e. only pure ST3) the rubbery PB-rich phase forms the major phase and for ?_PS > 10 wt.% the glassy PS-rich phase. (ii) At 40-60 wt.% PS homopolymer, a layer-like morphology is formed where the PS-rich layer thickness is ?50 nm, a critical dimension, which is crucial for understanding the ductile-to-semiductile transition. (iii) For 80 wt.% PS homopolymer, PS-rich phase starts to form the matrix combined with a transition from shear stress dominated (shear yielding) to normal stress dominated behaviour (PS-like crazes). The co-continuous morphology at 20 wt.% and 30 wt.% PS is capable of improving toughness of block copolymers, demonstrated by the observed maximum in the non-essential work of fracture and thus explaining a new way of toughening of polymers while retaining high transparency. The correspondence between the ductile-to-semiductile transition and the change in the shape of plastic zone from circular to elliptical as revealed from strain field analysis could be clearly reaffirmed by the observed transition from shear to normal force induced deformation in the fractured surface analysis of these blends. The conceptual correspondence of βw_p and w_e with T_J and δ_0.2 respectively reveal that resistance against crack propagation (βw_p and T_J) is morphology sensitive while the resistance against crack initiation (w_e and δ_0.2) is matrix sensitive.