Tribotronics—Towards active tribology

A constant trend towards more compact mechanical systems with higher power densities and increased thermo-mechanical loads emphasises the importance of the development of new design approaches and novel tribological systems. Ignoring this may cause a significant slow down in technological and industrial development. Tribotronics or active tribology based on adaptive performance is thought of as being critical in the implementation of smart machine concepts. Recognition of the importance of tribotronics, or active control of system loss outputs, such as those through friction and wear will have significant beneficial economic consequences as a result of the associated accelerated rate of technological progress. These smart tribotronic systems can be embedded in a great variety of machines and mechanisms. If this integration is made at the design stage, products that are more flexible, efficient and reliable can be produced. The concept of tribotronics is presented and discussed in this paper. Some illustrative examples that show the feasibility of an “active” approach are given. In addition, various possibilities already reported in literature are discussed.     

Determination of the molecular weight distribution of cellulose on calibrated gel columns

CMC samples obtained by gel filtration on a preparative scale were used to calibrate an agarose column. The relation between molecular weight and the peak elution volume for monodisperse samples were calculated as well as the relation between band broadening and the peak elution volume. In the calculations of the molecular weight distribution curves of the studied CMC samples, consideration was given to the variable band broadening by proper transformations of the experimental data, thus making it possible to obtain numerical solutions free from oscillations. The method admits a rapid determination of the molecular weight distribution of cellulose and related materials.     

Antioxidative effects of polyamines

The antioxidative effects of spermine, spermidine and putrescine were determined by measurement of primary and secondary oxidation products of polyunsaturated fatty acids, using gas and liquid chromatography as well as spectrophotometric recordings. It was demonstrated that polyamines inhibit the oxidation of polyunsaturated fatty acids,α-tocopherol and carotenoid pigments. Both linear and nonlinear dose/response relationships have been observed. The efficiency of a given polyamine was correlated with the number of amine groups in the molecule. Spermine was, thus, more efficient than spermidine, which in turn had a higher efficiency than putrescine. The relative antioxidative effect was as follows: spermine (100.0), spermidine (61.0), putrescine (23.0), ethoxyquin (27.6), ascorbyl palmitate (18.3), octyl gallate (7.9), tert butylhydroquinone (6.3), butylated hydroxyanisole (3.6) andα-tocopherol (3.4).     

Note: The intermodulation lockin analyzer

Nonlinear systems can be probed by driving them with two or more pure tones while measuring the intermodulation products of the drive tones in the response. We describe a digital lockin analyzer which is designed explicitly for this purpose. The analyzer is implemented on a field-programmable gate array, providing speed in analysis, real-time feedback, and stability in operation. The use of the analyzer is demonstrated for intermodulation atomic force microscopy. A generalization of the intermodulation spectral technique to arbitrary drive waveforms is discussed.     

Grid resource brokering algorithms enabling advance reservations and resource selection based on performance predictions

We present algorithms, methods, and software for a Grid resource manager, that performs resource brokering and job scheduling in production Grids. This decentralized broker selects computational resources based on actual job requirements, job characteristics, and information provided by the resources, with the aim to minimize the total time to delivery for the individual application. The total time to delivery includes the time for program execution, batch queue waiting, and transfer of executable and input/output data to and from the resource. The main features of the resource broker include two alternative approaches to advance reservations, resource selection algorithms based on computer benchmark results and network performance predictions, and a basic adaptation facility. The broker is implemented as a built-in component of a job submission client for the NorduGrid/ARC middleware.     

Nonlinear buckling optimization of composite structures

The paper presents an approach to nonlinear buckling fiber angle optimization of laminated composite shell structures. The approach accounts for the geometrically nonlinear behaviour of the structure by utilizing response analysis up until the critical point. Sensitivity information is obtained efficiently by an estimated critical load factor at a precritical state. In the optimization formulation, which is formulated as a mathematical programming problem and solved using gradient-based techniques, a number of the lowest buckling factors are included such that the risk of “mode switching” during optimization is avoided. The presented optimization formulation is compared to the traditional linear buckling formulation and two numerical examples, including a large laminated composite wind turbine main spar, to clearly illustrate the pitfalls of the traditional formulation and the advantage and potential of the presented approach.     

Cost efficiency comparison of four video-based techniques for assessing upper arm postures

Many video-based techniques for assessing postures at work have been developed. Choosing the most appropriate technique should be based on an evaluation of different alternatives in terms of their ability to produce posture information at low input costs, i.e. their cost efficiency. This study compared four video-based techniques for assessing upper arm postures, using cost and error data from an investigation on hairdressers. Labour costs associated with the posture assessments from the video recordings were the dominant factor in the cost efficiency comparison. Thus, a work sampling technique associated with relatively large errors appeared, in general, to be the most cost-efficient because it was labour-saving. Measurement bias and other costs than labour cost for posture assessment influenced the ranking and economic evaluation of techniques, as did the applied measurement strategy, i.e. the numbers of video recordings and repeated assessments of them. PRACTITIONER SUMMARY: The cost efficiency of four video-based techniques for assessing upper arm postures was compared. Work sampling techniques were in general more cost efficient than continuous observations since they were labour-saving. Whilst a labour cost dominated the comparison, 'hidden costs', bias and measurement strategy also influenced this dominance.     

Early Osteogenic Marker Expression in hMSCs Cultured onto Acid Etching-Derived Micro- and Nanotopography 3D-Printed Titanium Surfaces

Polyetheretherketone (PEEK) titanium composite (PTC) is a novel interbody fusion device that combines a PEEK core with titanium alloy (Ti6Al4V) endplates. The present study aimed to investigate the in vitro biological reactivity of human bone-marrow-derived mesenchymal stem cells (hBM-MSCs) to micro- and nanotopographies produced by an acid-etching process on the surface of 3D-printed PTC endplates. Optical profilometer and scanning electron microscopy were used to assess the surface roughness and identify the nano-features of etched or unetched PTC endplates, respectively. The viability, morphology and the expression of specific osteogenic markers were examined after 7 days of culture in the seeded cells. Haralick texture analysis was carried out on the unseeded endplates to correlate surface texture features to the biological data. The acid-etching process modified the surface roughness of the 3D-printed PTC endplates, creating micro- and nano-scale structures that significantly contributed to sustaining the viability of hBM-MSCs and triggering the expression of early osteogenic markers, such as alkaline phosphatase activity and bone-ECM protein production. Finally, the topography of 3D-printed PTC endplates influenced Haralick’s features, which in turn correlated with the expression of two osteogenic markers, osteopontin and osteocalcin. Overall, these data demonstrate that the acid-etching process of PTC endplates created a favourable environment for osteogenic differentiation of hBM-MSCs and may potentially have clinical benefit.