浅谈紫砂"松桩壶"的造型艺术和文化意蕴

紫砂是我国特有的手工陶土工艺品,凭借其千变万化、精致细腻的雕刻装饰所带来的视觉享受,加上沏茶不失原味、不易变味的实用性功能,深受人们喜爱,而大师们的作品更是具有了收藏价值,成为了"古董",一壶难求。随着工艺的成熟,匠人们开始在保证紫砂壶表面造型艺术的同时,去追求更深层次的文化精神内涵。本文就紫砂"松桩壶"为例,详谈它的造型艺术以及文化意蕴。     

移动设备交互环境下的注视点感知计算方法

为了提高移动设备上眼动跟踪的精度和效率、降低硬件成本,提出基于注视点回忆的眼动数据感知计算方法.首先利用人的短时记忆特性建立注视点回忆和自我报告机制,要求用户点击移动设备屏幕来提交注视点位置数据;然后基于支持向量回归方法建立注视点数据误差补偿模型,对用户回忆和提交的注视点数据进行校正,进一步提高数据精度.为了验证数据误差补偿模型的效果,设计并开展了用户实验,结果表明,使用数据误差补偿模型后,对于不同类型的测试任务和测试图片,注视点回忆数据精度提高15%～40%.     

腰英台油田压裂综合效果分析

针对油田规模较小,含油面积小,油藏闭合幅度小,具有"三小"的典型特征的腰英台油田,压裂是增油措施主要手段之一,从压裂成功率、有效率及成本构成情况进行评价,为了油田增油上产,对投入与产出进行经济效益分析,为了施工决策提供依据。     

寨里窑青瓷——中国陶瓷发展史上的一座里程碑

<正>瓷器是中国古代的一项伟大发明,在漫长的历史岁月中,勤劳智慧的中国先民们点土成金,创造了泥与火的艺术,写下了光辉灿烂的篇章,为人类文明作出了巨大的贡献。亨有盛誉的中华古瓷,已成为世界各大博物馆里的明珠,也将越来越广泛地成为中国和世界各地专家学者的研究对象,并受到广大收藏家和陶瓷爱好者的珍重。中国瓷器的发明和发展,是从低级到高级,从原始到成熟逐步发展的过程。数千年来,我国的瓷器品种和类别不断地增加,这其中数最古老而     

油田生产噪声影响现状及治理效果分析

目前,随着地方建设的发展,城区逐渐与油田生产区域融合,出现了大量油田生产噪声扰民的现象。针对油田生产噪声扰民的问题,对某油田中心城区内各类油田生产噪声进行监测。其中,井场类厂界噪声超标率14.0%,钻井、作业施工类场界噪声超标率20.0%。还对油田常用的噪声治理设施进行效果分析,针对目前油田噪声治理工作存在的问题提出了整改建议。     

Separation of hematite from banded hematite jasper (BHJ) by magnetic coating

The separation of iron oxide from banded hematite jasper(BHJ) assaying 47.8% Fe, 25.6% Si O2 and 2.30%Al2O3 using selective magnetic coating was studied. Characterization studies of the low grade ore indicate that besides hematite and goethite,jasper, a microcrystalline form of quartzite, is the major impurity associated with this ore. Beneficiation by conventional magnetic separation technique could yield a magnetic concentrate containing 60.8% Fe with 51% Fe recovery. In order to enhance the recovery of the iron oxide minerals, fine magnetite, colloidal magnetite and oleate colloidal magnetite were used as the coating material. When subjected to magnetic separation, the coated ore produces an iron concentrate containing 60.2% Fe with an enhanced recovery of56%. The AFM studies indicate that the coagulation of hematite particles with the oleate colloidal magnetite facilitates the higher recovery of iron particles from the low grade BHJ iron ore under appropriate conditions.     

对话

正Héctor Esrawe毕业于墨西哥伊比利亚美洲大学,2003年创建Esrawe工作室,开始了他独立设计师的职业生涯。Esrawe工作室主要涉及博物馆、酒店、餐馆、酒吧、办公室、住宅的设计以及产品包括家具的创新与定制。Héctor Esrawe认为,设计是一个将使用者和周围环境相联系并发生生动对话的过程。在选材方面,他对玻璃、木材、金属和石材等情有独钟,同时对新工艺和新材料的探索也有着极大的热忱。     

Strain rate dependency and fragmentation pattern of expanding warheads

For the characterization of the behaviors of a metal material in events like expanding warheads, it is necessary to know its strength and ductility at high strain rates, around 104e105/s. The flyer plate impact testing produces the uniform stress and strain rates but the testing is expensive. The Taylor test is relatively inexpensive but produces non-uniform stress and strain fields, and the results are not so easily inferred for material modeling. In the split-Hopkinson bar(SHB), which may be used in compression, tension and torsion testing, the strain rates never exceeds 103/s. In the present work, we use the expanding ring test where the strain rate is 104e105/s. A streak camera is used to examine the expanding ring velocity, and a water tank is used to collect the fragments. The experimental results are compared with the numerical simulations using the hydrocodes AUTODYN, IMPETUS Afea and a regularized smooth particle(RSPH) software. The number of fragments increases with the increase in the expansion velocity of the rings. The number of fragments is similar to the experimental results. The RSPH software shows much the same results as the AUTODYN where the Lagrangian solver is used for the ring. The IMPETUS Afea solver shows a somewhat different fragmentation characteristic due to the node splitting algorithm that induces pronounced tensile splitting.