Modified surface-active monomers for adhesive bonding to dentin

PMGDM, a PMDM-type adhesive monomer, was synthesized from pyromellitic dianhydride and glycerol dimethacrylate. Only the para isomer of PMDM, a solid, is used in dental adhesives. The adhesive monomer PMGDM is a liquid and consists of a mixture of para- and meta isomers. This study shows that PMGDM has several advantages over PMDM. For example, the adhesive can be applied at a greater thickness, and additives and/or additional initiators for improved curing can be incorporated. Use of the liquid monomer PMGDM also provided a convenient means of varying the thickness of the adhesive layer between dentin and composite. The adhesive bonds were tested in both shear and tensile modes. PMDM was used as the control. The reliability of the bonds, as judged from the Weibull modulus and Weibull characteristic strength, was improved by (1) use of more concentrated solutions of PMGDM adhesive, (2) use of an adhesive thickness of about 25 microns, and (3) modification of PMGDM with a diluent monomer which is expected to enhance the degree of cure and/or the dentin-wetting properties of the adhesive resin.     

Bioethics for clinicians: 16. Dealing with demands for inappropriate treatment

Demands by Patients or their Families for treatment thought to be inappropriate by health care providers constitute an important set of moral problems in clinical practice. A variety of approaches to such cases have been described in the literature, including medical futility, standard of care and negotiation. Medical futility fails because it confounds morally distinct cases: demand for an ineffective treatment and demand for an effective treatment that supports a controversial end (e.g., permanent unconsciousness). Medical futility is not necessary in the first case and is harmful in the second. Ineffective treatment falls outside the standard of care, and thus health care workers have no obligation to provide it. Demands for treatment that supports controversial ends are difficult cases best addressed through open communication, negotiation and the use of conflict-resolution techniques. Institutions should ensure that fair and unambiguous procedures for dealing with such cases are laid out in policy statements.     

Antennal olfactory responsiveness of three sympatricIps species [Ips avulsus (Eichhoff),Ips calligraphus (Germar),Ips grandicollis (Eichhoff)], to intra- and interspecific behavioral chemicals

Electroantennograms (EAGs) from male and femaleIps avulsus, I. calligraphus, andI. grandicollis to their pheromones and selected host odorants or kairomones verified the presence of antennal olfactory receptors in both sexes of each species capable of detecting ipsdienol, ipsenol,cis- andtrans-verbenol,endo-brevicomin -pinene, frontalin, and verbenone. Each species possesses receptors with lower thresholds and in greater abundance for the compounds they produce and to which they are behaviorally most responsive. Detection of bothIps andDendroctonus pheromones by the three cohabiting species provides a sensory basis for olfactory interactions among the species. Differences in both threshold and saturation levels for EAGs for the various behavioral chemicals could denote differences in specific behavioral roles for each compound.Texas Agricultural Experiment Station Paper Number TA-22463. This research was supported in part by McIntire-Stennis Project 1525, USDA-CR grants 85-CRCR-1-1856 and 86-CRCR-2019 and NATO Collaborative Research Grant 86-0710. The findings, opinions, and recommendations expressed herein are those of the authors and not necessarily those of the U.S. Department of Agriculture. All programs and information of the Texas Agricultural Experiment Station are available without regard to race, ethnic origin, religion, sex, or age.Mention of a trademark, proprietary product, or vendor does not constitute a guarantee or warranty of the product by the U.S. Department of Agriculture and does not imply its approval to the exclusion of other products or vendors that may also be suitable.     

The structure of parts produced by stereolithography injection mould tools and the effect on part shrinkage

Stereolithography (SL) tooling for plastic injection moulding provides a low cost and quick alternative to hard tooling methods when producing a small quantity of parts. However, work by the authors has shown that a different rate of polymer shrinkage was experienced in semi-crystalline parts when produced from SL moulds as compared to those from conventional metal tooling methods. Different shrinkage means the parts are not truly the same as those that would be produced by metal tooling and highlights a disadvantage to SL tooling.This work associates the increased shrinkage experienced to a greater percentage crystallinity developed in the parts due to their thermal history during processing. In these experiments the cooling rate, which is imparted due to the heat transfer characteristics of the mould has been identified as the controlling factor of a parts % crystalline content and the cause of shrinkage anomalies.The morphology analysis results show that there is 30% more crystallinity developed in the nylon (PA66) parts produced in SL moulds than those produced from aluminium moulds. The results also reveal different characteristics during thermal analysis that may also be due to the thermal history imparted by the mould.The work utilises the thermal analysis technique differential scanning calorimetry (DSC) to quantify the different levels of crystallinity in the parts. The thermal characteristics of the mould are demonstrated by real-time data acquisition.     

Layer thickness and draft angle selection for stereolithography injection mould tooling

The introduction of rapid prototyping has allowed engineers and designers to generate physical models of required parts very early on in the design and development phase. Further to this, the use of stereolithography (SL) cavities as a rapid tooling method has allowed plastic prototype parts to be produced in their most common production manner -- by injection moulding. The process is best suited to small production runs where the high costs of conventionally machined tooling is prohibitive. One of the major drawbacks of the SL injectionmoulding process is the susceptibility of the tools to premature failure. SL tools may break under the force exerted by part ejection when the friction between a moulding and a core is greater than the tensile strength of the core, resulting in tensile failure. Very few justified recommendations exist about the choice of mould design variables that can lower the part ejection force experienced and reduce the risk of SL tool failure. This research investigates the ejection forces resulting from SL injection moulding tools which are identical in all respects except for their build layer thickness and incorporated draft angles in an attempt to identify appropriate evidence for recommendations with respect to these design variables and SL injection moulding. The results show that adjustment of draft angle results in a change of part ejection force as a reasonably linear relationship. An adjustment of the build layer thickness results in a change in part ejection force as a more non-linear relationship. The adjustment of build layer thickness had a greater effect on ejection force than the adjustment of draft angle. The results also show that the surface roughness of all tools remains unchanged after moulding a number of parts in polypropylene. A mathematical model was used in an attempt to predict ejection forces according to the moulding material used. This model reflected the experimental results in terms of relative values but not in absolute values, which may be due to inappropriate specific values used in their calculation. Finite element analysis (FEA) was used in an attempt to identify the factors involved in the ejection process. Results indicate that the effect of draft angle on ejection force is due to elastic deformation of the surface roughness. A fact borne out by the lack of damage to the surface after ejection.     

Selectively fluorinated analogs reveal differential olfactory reception and inactivation of green leaf volatiles in insects

The role of the alkyl terminus of green leaf volatile (GLV) molecules in olfactory reception and inactivation was examined in three diverse insect species: the beet armyworm,Spodoptera exigua (Lepidoptera); the Colorado potato beetle,Leptinotarsa decemlineata (Coleoptera); and the desert locust,Schistocerca gregaria (Orthoptera), using selectively fluorinated analogs of GLVs and electroantennograms (EAGs). When only the magnitude of the depolarization of the EAG is considered (a measure of reception), the order of effectiveness was 1-hexanol (6:OH)=(Z)-3-6:OH > 5,5,6,6,6-pentafluoro-(Z)-3-6:OH =5,5-difluoro-(Z)-3-6:OH 5,5,6,6,6-pentafluoro-6: OH. Percent recovery of the EAG (a measure of inactivation) was greater for the pentafluoro-(Z)-3-6: OH analog than for the difluoro-(Z)-3-6: OH analog. Our results show that the alkyl end of GLV molecules plays an important role not only in reception, but also inactivation processes in insect olfaction. Furthermore, specificities of these two processes may differ.Research conducted by J.C.D. while on an ARS Fellowship at IPO-DLO.     

Fatal gastrointestinal haemorrhage due to coexisting primary aorto-enteric and aorto-colic fistulae. Complicating untreated atheromatous abdominal aortic aneurysm

We report a case of aorto-enteric and aorto-colonic fistulae in a 73 year old man with no previous abdominal surgery which resulted in massive gastrointestinal haemorrhage and death and was undiagnosed despite several hospital admissions and endoscopic examinations. This case serves to highlight an extremely rare but fatal condition, which is potentially treatable, if an early diagnosis is made.     

Accuracy of subsampling mill for granular materials

A subsampling mill was constructed with 19 subsample spouts similar to the 1 or 2 subsample spouts on the conventional subsampling mills. Samples of peanuts, each of which contained 1 kernel made radioactive by neutron activation, were comminuted in the mill. For treatment M the discharge from each spout was kept separate. For treatment R, the discharge from all 19 spouts was blended together in a twin-shelled blender and subdivided with a riffle divider into 16 subsamples which averaged the same weight as the M subsamples. Radioactivity counts/gram of each subsample were measured. Eleven samples were comminuted for each treatment which produced a total of 209 M samples and 176 R samples. An analysis of variance on the pooled data from each treatment showed a mean square error of 1318.3 for the M treatment and 1278.6 for the R treatment. The null hypothesis that the mean square errors for the two treatments are equal was not rejected by the F test (P=0.421).     

Bright greenish-yellow fluorescence and aflatoxin in recently harvested yellow corn marketed in north carolina

Corn kernels that exhibited bright greenish-yellow fluorescence (BGYF) under long-wave ultraviolet light were hand-picked from samples of yellow corn produced in eastern North Carolina. The BGYF kernels from 113 4-kg samples contained an average of 8665 parts per billion (ppb) aflatoxin compared to an average of 46 ppb in the non-BGYF kernels. A regression analysis between the ppb aflatoxin concentration and the wt % BGYF kernels in 2,304 4.5-kg samples produced the regression equation: ppb in sample =197 (wt % BGYF). The correlation coefficient for the analysis was 0.90. Testing programs to reduce aflatoxin concentrations in purchased lots of corn based on either the BGYF method or the AOAC chemical assay method were compared. The average aflatoxin concentration in lots accepted by the AOAC method was 4 ppb, 10 ppb or 18 ppb when an acceptance level of < 20 ppb, < 50 ppb or < 100 ppb, respectively, was used. For the BGYF method, the average aflatoxin concentration in accepted lots was 10 ppb, 16 ppb or 22 ppb when an acceptance level of < 0.10% BGYF, < 0.25% BGYF or < 0.50% BGYF, respectively, was used. Approximately the same percentage of lots were accepted by both methods when either the low, medium or high acceptance level was used. Paper no. 6930 of the Journal Series of the North Carolina Agriculture Research Service (NCARS), Raleigh, NC.     

Probing the origins and control of shrinkage stress in dental resin-composites: I. Shrinkage stress characterization technique*

The accurate and reliable characterization of the polymerization shrinkage stress is becoming increasingly important, as the shrinkage stress still is a major drawback of current dimethacrylate-based dental materials and restricts its range of applications. The purpose of this research is to develop a novel shrinkage stress measurement device to elucidate the shrinkage stress evolution of dental restorative composites while allowing for controlled sample deformation during the polymerization. Furthermore, the device is designed to mimic the clinically relevant cusp-to-cusp displacement by systematically adjusting the instrument compliance, the bonded surface area/unbonded area by sample geometry, and the total bonded area by sample diameter. The stress measurement device based on the cantilever beam deflection theory has been successfully developed and characterized using a commercial dental composite. It was shown that this device is a highly effective, practical and reliable shrinkage stress measurement tool, which enables its facile applications to the investigation of shrinkage stress kinetics of both commercial and experimental composites, as well as for probing various aspects that dictate shrinkage stress development.