液-液分散性质的研究概况

多相接触器,如反应器、萃取器,其性能无不与相分散的性质有关。分散相尺寸及其分布、相界面积,必然影响两相的流体力学性质、分散相滞存率(hold up)分布和停留时间分布。对于液-液系统而言,液滴的破碎及凝聚速率,对传质效果有重要影响。近年来,溶剂萃取塔的数学模型已有很大进     

Development and validation of a Monte Carlo simulation of photon transport in an Anger camera

The geometric component of the point spread function (PSF) of a gamma camera collimator can be determined analytically, and the penetration component can be calculated readily by numerical ray-tracing. A Monte Carlo simulation of photon transport which includes collimator scatter is developed. The simulation was implemented with an array processor which propagates up to 1024 photons in parallel, allowing accurate estimates of the total radial PSF in less than a day. The simulation was tested by imaging monoenergetic point sources of Tc-99m, Cr-51, and Sr-85 (140, 320, and 514 keV, respectively) on a General Electric Star Cam with low-energy, general-purpose, and medium-energy collimators. Comparisons of measured and simulated PSFs demonstrate the validity of the model and the significance of collimator scatter in the degradation of image quality.     

The effects of long-term VDT usage on the nature and incidence of asthenopic symptoms

An opportunity arose in 1985 to become involved in a transition of working practice from hard copy to VDT. Over a two-year period, 161 VDT users and 65 control subjects in the same office environment were regularly and routinely examined for symptoms of asthenopia. The analysis of data shows that there are no significant differences in type, number and frequency of the work-related symptoms between VDT users and non-VDT users. It appears that reporting of symptoms within the group may be random, although certain symptoms do appear more frequently than others. Additionally, it appears that there is a significant difference between male and female users in the frequency of symptom reporting.     

Ergonomics in sickle operation

Sickle operation in harvesting has been analysed with reference to design features of nine different types of sickles, and field and laboratory based investigations on biomechanical stresses and physiological valuation on six farmers. It has been indicated that the blade geometry contributes significantly to human performance and there is ample scope for further design optimisation. The suggested modifications are: (i) sickle weight - 200 g; (ii) total length of sickle - 33 cm; (iii) handle length - 11 cm; (iv) handle diameter - 3 c cm; (v) radius of blade curvature - 15 cm; (vi) blade concavity - 5 cm; (vii) serrated sickle: tooth pitch - 0.20 cm and tooth angle - 60 degrees; (viii) ratio of the length of cutting surface to chord length - 1.20.     

Simple chemical syntheses of TAG monohydroperoxides

For the purpose of synthesizing standards to be used in the quantification of TAG hydroperoxides, three TAG (1,2-dioleoyl-3-palmitoylglycerol, 1-oleoyl-2-linoleoyl-3-palmitoylglycerol, and triolein) monohydroperoxides were chemically synthesized as authentic specimens. TAG were prepared by using a simple condensation in pyridine of glycerol and the corresponding acid chlorides. These TAG were then converted into monohydroperoxides by a photosensitized peroxidation. The synthesized monohydroperoxides were analyzed by normal-phase and RP-HPLC. The results of normal-phase HPLC analysis showed that monohydroperoxides from a corresponding TAG were a mixture of regioisomers. In RP-HPLC, however, the regioisomers of monohydroperoxides were not separated and gave a single peak, which may improve the sensitivity for the detection of TAG monohydroperoxides. In this study TAG monohydroperoxide standards were synthesized; these will be useful for the study of yet unknown biological and pathological roles of TAG hydroperoxides.     

振动筛板槽中某些液液分散性质的研究

本文主要对液液分散动力学中的某些重要函数,进行了实验研究.在理论分析及实验数据的基础上,对振动筛板槽中的液滴破碎概率与振动频率、振幅、液滴直径、体系的物理性质以及筛板孔径的关系,进行了关联.探讨了液滴可能发生破碎的临界条件,并根据实验结果,建立了液滴在发生破碎后子滴数的关系式.此外,采用激光平行光技术并与微机结合,在线测量Sauter液滴直径.实验结果与理论计算值相近,并研究了振动频率与振幅对液滴直径的影响.     

一种新型高粘性物料萃取设备

本文讨论了多种形式塔盘结构对粘度高达187～2426cP物料萃取效果的影响。对塔内径为142mm及500mm的萃取塔,分别对转盘、栅板塔盘、齿形塔盘、多孔转盘以及网格塔盘进行静态传质实验。结果说明,网格塔盘传质效果最好。此外,还对塔内径为152mm、高为2m的转盘塔和网格塔进行两相逆流传质实验并进行比较,证明新型网格塔传质效率可提高一倍以上。并获得网格塔传质单元高度与转速、流率、粘度及滞存率等各因素的关联式。     

振动筛板槽中液滴分散动力学的研究——(Ⅱ)实验结果及Monte-Carlo模拟技术的应用

本文根据前文(I)报的理论分析,采用Monte-Carlo方法对实验数据进行模拟.液滴直径的测量采用照相法及透光法.所测得的液滴直径分布数据及平均液滴直径的数据,在微机上进行拟合归纳,得到了振动筛板槽中液滴直径分布模型及液滴平均直径的关联式.模型计算结果与实测值拟合较好.应用Monte-Carlo模拟技术对液滴破碎和凝聚这一随机过程进行了模拟及参数估计,得到了液滴破碎速率及凝聚速率参数.     

振动筛板槽中液滴分散动力学的研究(Ⅰ)实验研究及理论分析

本文通过实验观察发现,液滴的破碎只有在液滴与振动筛板孔口发生碰撞时才发生.基于这个实验现象,建立了振动筛板槽内液滴破碎的新模型.把筛板孔口附近的剪应力作为破碎力,破碎速率可表示为:G(d)=C_12Af/H(?)~n_4(d/d_h)~n_5[1-(d_(cr)/d)~(2n_1+1)]~0.5n(d)液滴的凝聚可以按气体分子碰撞过程来处理.凝聚速率可以用下式表示:ω(d_1,d_2)=C_Ⅱ(d_1+d_2)~(7/3)∈~（1/3)[β_d∈~(2/3)d_1+d_2/σ(d_1+d_2）~（1/3）]~n_6n(d_1)n(d_2)