Adsorption of four perfluorinated acids on non ion exchange polymer sorbents

Perfluorinated compounds (PFCs) have attracted global concern due to their ubiquitous distribution and properties of persistence, bio accumulation and toxicity. The process of adsorption has been identified as an effective technique to remove PFCs in water. Different non ion-exchange polymeric adsorbents were tested with regard to their sorption kinetics and isotherms at low PFCs concentrations. Selected PFCs were perfluorobutanoic acid (PFBA), perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA) and perfluorodecanoic acid (PFDA) and the tested polymers were three types of Dowex optopores (V-493, V503, and L493), Amberlite XAD-4, and Filtrasorb 400 (Granular Activated Carbon-GAC). We observed the selective adsorption of PFCs on synthetic polymers. For PFDA, Amberlite XAD-4 gave the Freundlich adsorption constant of 2,965 (microg PFCs/g sorbent)(microg PFCs/L)(-n), which was higher than that of GAC (121.89 (microg PFCs/g sorbent) (microg PFCS/L)(-n)). In the case of PFBA, GAC showed better performance (13.36) (microg PFCs/g sorbent) microg PFCS/L)(-n) than synthetic polymers (0.62-5.23) (microg PFCs/g sorbent) (microg PFCS/L)(-n). Adsorption kinetics of all adsorbents were well described (R2 = 0.85-1) by pseudo-second order kinetic model. Sorption capacity was influenced by initial PFCs concentration for all adsorbents. GAC reached the equilibrium concentration within 4 hours, Amberlite XAD 4 reached it within 10 hours and other polymers took more than 70 hours.     

Differences in wearer response to garments for outdoor activity

The performance of garments for outdoor activity was compared. Three fabrics, each in garments for the upper body, matched garment/wearer dimensions, were worn by 10 athletically 'well-trained' males under controlled conditions (hot 32 +/- 2 degrees C, 20 +/- 2% relative humidity (RH); cold 8 +/- 2 degrees C, 40 +/- 2% RH) with physical (instrumental) and sensory responses obtained during the trials. Differences in human responses to the fabrics/garments included heart rate, core temperature during run (hot, cold), rest (hot) and walk (cold), heat content of the body, humidity under garments during rest and run and time to onset of sweating. No such differences were identified for change in body mass, core temperature during walk (hot) and rest (cold), skin temperature, temperature of skin covered by the garment, humidity under the garments during walk or for any perceptions (thermal sensations, thermal comfort of torso, exertion, wetness). The garment in single jersey wool fabric performed best in both hot and cold conditions. Effects of garments on wearers are often related to properties of the fabrics from which the garments are made. This study shows that only some differences in fabric properties result in measurable thermophysiological and perceptual responses of the garment wearers and underlines the difficulty in predicting performance of garments/persons from laboratory tests on fabrics.     

Classifying algorithms for SIFT-MS technology and medical diagnosis

Selected Ion Flow Tube-Mass Spectrometry (SIFT-MS) is an analytical technique for real-time quantification of trace gases in air or breath samples. SIFT-MS system thus offers unique potential for early, rapid detection of disease states. Identification of volatile organic compound (VOC) masses that contribute strongly towards a successful classification clearly highlights potential new biomarkers. A method utilising kernel density estimates is thus presented for classifying unknown samples. It is validated in a simple known case and a clinical setting before-after dialysis. The simple case with nitrogen in Tedlar bags returned a 100% success rate, as expected. The clinical proof-of-concept with seven tests on one patient had an ROC curve area of 0.89. These results validate the method presented and illustrate the emerging clinical potential of this technology.     

J. H. Kulick, J. M. Jarem, R. G. Lindquist, S. T. Kowel, and M. W. Friends are with the Department of Electrical and Computer Engineering, University of Alabama in Huntsville, Huntsville, Alabama 35899

The development and modeling of a liquid-crystal phase grating for real-time diffractive three-dimensional displays are discussed. The system being developed, which is called the ICVision system, utilizes a number of ideas that will result in a rugged, low-power three-dimensional display offering both vertical and horizontal parallax and eventually full color. Fringing fields created between interdigitated electrodes formed on top of VLSI die will induce a diffraction pattern in a thin layer of liquid crystal that will cover the die. A detailed electrostatic and diffraction analysis of liquid-crystal phase-grating regions that will make up the final display is given here. The electrostatic analysis is developed by use of the method of moments. The diffraction analysis is developed by use of rigorous coupled-wave diffraction theory. The numerical results obtrained from the mathematical model are compared with experimental diffraction results from preliminary LCD cells that have been assembled as prototype ICVision devices.     

Liquid crystal-on-silicon implementation of the partial pixel three-dimensional display architecture

We report the implementation of a liquid crystal-on-silicon, three-dimensional (3-D) diffractive display based on the partial pixel architecture. The display generates multiple stereoscopic images that are perceived as a static 3-D scene with one-dimensional motion parallax in a manner that is functionally equivalent to a holographic stereogram. The images are created with diffraction gratings formed in a thin liquid crystal layer by fringing electric fields from transparent indium tin oxide interdigitated electrodes. The electrodes are controlled by an external drive signal that permits the 3-D scene to be turned on and off. The display has a contrast ratio of 5.8, which is limited principally by optical scatter caused by extraneous fringing fields. These scatter sources can be readily eliminated. The display reported herein is the first step toward a real-time partial pixel architecture display in which large numbers of dynamic gratings are independently controlled by underlying silicon drive circuitry.     

Conjugate schema and basis representation of crossover and mutation operators

In genetic search algorithms and optimization routines, the representation of the mutation and crossover operators are typically defaulted to the canonical basis. We show that this can be influential in the usefulness of the search algorithm. We then pose the question of how to find a basis for which the search algorithm is most useful. The conjugate schema is introduced as a general mathematical construct and is shown to separate a function into smaller dimensional functions whose sum is the original function. It is shown that conjugate schema, when used on a test suite of functions, improves the performance of the search algorithm on 10 out of 12 of these functions. Finally, a rigorous but abbreviated mathematical derivation is given in the appendices.     

Terabit optical local area networks for multiprocessing systems

The design of a scalable optical local area network formultiprocessing systems is described. Each workstation has aparallel-fiber-ribbon optical link to a centralized complementarymetal-oxide silicon (CMOS) switch core, implemented on a singlecompact printed circuit board (PCB). When the Motorola Optobusfiber technology is used, each workstation has a data bandwidth of 6.4Gbits/s to the core. A centralized switch core interconnecting 32workstations supports a 204-Gbit/s aggregate data bandwidth. Theswitch core is based on a conventional broadcast-and-selectarchitecture, implemented with parallel CMOS integrated circuits(IC's). The switch core scales well; by incorporation of theCMOS optoelectronic IC's with optical input-output, the electricalcore can be reduced to a single-chip optoelectronic IC with terabitcapacities. A prototype of an optoelectronic switch core has been fabricated and is described. The appeal of the architectureincludes its reliance on commercially available parallel-fibertechnology, its reliance on the well-developed markets of local areanetworks and networks of workstations, and its smooth scalability from the electrical to optical domains as technology matures.     

Development of an automated platform for high-throughput P1-phage transduction of Escherichia coli

Synthetic biology depends on the ability to rapidly produce strains with improved phenotypes but is limited by the ability to rapidly produce strain collections with directed mutations. Here, we present a system capable of overcoming this limitation through automated P1-phage transductions of Escherichia coli. By combining the Keio collection of single-gene deletion E. coli mutants with P1-phage, it is possible to generate an engineered host-strain collection consisting of every possible gene deletion mutant. This strategy was tested by transducing 355 genetic markers from the Keio collection into five different host strains, and it achieved a 98% success rate. This method offers an improved mechanism for rapidly engineering collections of microbes and provides one method for rapidly deploying a broader synthetic biology effort.