Green synthesised zinc oxide nanostructures through Periploca aphylla extract shows tremendous antibacterial potential against multidrug resistant pathogens

To grapple with multidrug resistant bacterial infections, implementations of antibacterial nanomedicines have gained prime attention of the researchers across the globe. Nowadays, zinc oxide (ZnO) at nano‐scale has emerged as a promising antibacterial therapeutic agent. Keeping this in view, ZnO nanostructures (ZnO‐NS) have been synthesised through reduction by P. aphylla aqueous extract without the utilisation of any acid or base. Structural examinations via scanning electron microscopy (SEM) and X‐ray diffraction have revealed pure phase morphology with highly homogenised average particle size of 18 nm. SEM findings were further supplemented by transmission electron microscopy examinations. The characteristic Zn–O peak has been observed around 363 nm using ultra‐violet–visible spectroscopy. Fourier‐transform infrared spectroscopy examination has also confirmed the formation of ZnO‐NS through detection of Zn–O bond vibration frequencies. To check the superior antibacterial activity of ZnO‐NS, the authors'' team has performed disc diffusion assay and colony forming unit testing against multidrug resistant E. coli, S. marcescens and E. cloacae. Furthermore, protein kinase inhibition assay and cytotoxicity examinations have revealed that green fabricated ZnO‐NS are non‐hazardous, economical, environmental friendly and possess tremendous potential to treat lethal infections caused by multidrug resistant pathogens.Inspec keywords: nanomedicine, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, scanning electron microscopy, X‐ray diffraction, antibacterial activity, transmission electron microscopy, particle size, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, enzymes, biochemistry, molecular biophysics, microorganisms, drugs, toxicology, bonds (chemical), semiconductor growth, nanofabrication, vibrational modesOther keywords: green synthesised zinc oxide nanostructures, Periploca aphylla extract, antibacterial potential, multidrug resistant pathogens, multidrug resistant bacterial infections, antibacterial nanomedicines, P. aphylla aqueous extract, structural examinations, scanning electron microscopy, X‐ray diffraction, pure phase morphology, homogenised average particle size, SEM, transmission electron microscopy, Fourier‐transform infrared spectroscopy, bond vibration frequency, antibacterial activity, disc diffusion assay, colony forming unit testing, S. marcescens, E. cloacae, E. coli, ultraviolet‐visible spectroscopy, protein kinase inhibition assay, cytotoxicity, lethal infections, ZnO     

Encapsulation of 2-amino-2-methyl-1-propanol with tetraethyl orthosilicate for CO2 capture

Carbon capture is widely recognised as an essential strategy to meet global goals for climate protection. Although various CO₂ capture technologies including absorption, adsorption and membrane exist, they are not yet mature for post-combustion power plants mainly due to high energy penalty. Hence researchers are concentrating on developing non-aqueous solvents like ionic liquids, CO₂-binding organic liquids, nanoparticle hybrid materials and microencapsulated sorbents to minimize the energy consumption for carbon capture. This research aims to develop a novel and efficient approach by encapsulating sorbents to capture CO₂ in a cold environment. The conventional emulsion technique was selected for the microcapsule formulation by using 2-amino-2-methyl-1-propanol (AMP) as the core sorbent and silicon dioxide as the shell. This paper reports the findings on the formulated microcapsules including key formulation parameters, microstructure, size distribution and thermal cycling stability. Furthermore, the effects of microcapsule quality and absorption temperature on the CO₂ loading capacity of the microcapsules were investigated using a self-developed pressure decay method. The preliminary results have shown that the AMP microcapsules are promising to replace conventional sorbents.     

Potential visible WO3/GO composite photocatalyst

Graphene oxide (GO) was synthesized by Hummers method. GO and tungsten oxide (WO₃) composites were successfully prepared by deposition of WO₃ on GO surface to make efficient visible light catalyst. Scanning electron microscopy of pure GO revealed that GO films are folded with kinked and wrinkled edges. The interspaces layers are partially filled by WO₃ nanoparticles with their less wrinkled edges and smooth surface of composite. Moreover, composite sheets are thin and transparent which allow easy penetration of light. EDS showed the presence of C, O, and W in GO/WO₃ composites with no impurity. UV-Vis diffused reflectance spectra showed red shift with the increase in WO₃ contents. Raman spectra of GO and GO/WO₃ composite show G and D bands. These bands reduced in intensity in composite sample due to removal of oxygenated functional groups with some new peaks of WO₃. FT-IR confirmed successful oxidation of graphite into GO with reduction in GO because oxide-related bond groups decrease after reduction. The transmittance peaks of WO₃ in composite sample are appeared indicating W-O-C linkages. The highest visible light activity of the composite is due to easy penetration of light with deposition of WO₃, low band gap, and new linkages.     

Quality assurance and authentication of herbal drug (Argyrolobium roseum and Viola stocksii) through comparative light and scanning electron microscopy

The quality assurance and authentication of crude herbal drugs play important role in the effective therapeutic effect of herbal drug and their products. There are many reported problems in quality assurance of herbal crude drugs concerning to their correct identification. The present study was designed with the aim to document the authentication and quality assurance of the herbal crude drugs (Argyrolobium roseum and Viola stocksii) thorough light microscopy (LM) and scanning electron microscopy (SEM). The detailed foliar anatomical studies showed polygonal epidermal cells having anticlinal walls in Argyrolobium roseum while rounded epidermal cells were observed in Viola stocksii. The anomocytic stomata type was observed in Argrolobium roseum while actinocytic was noticed in Viola stocksii. The pollen of studied species appeared as tricolporate showing reticulate exine sculpturing in Argrolobium roseum while fine perforations were recorded in Viola stocksii. Furthermore, quantitative analysis of phenols, flavonoids, and antioxidant activity showed high flavonoid and phenol content in Argyrolobium roseum as compared with Viola stocksii. It was observed that Argyrolobium roseum was discriminated from the Viola stocksii based on the leaf and pollen micromorphological traits by using LM and SEM techniques. It was concluded that LM and SEM techniques were found useful for the quality assurance of botanicals and their authentication.     

Comparative light and scanning electron microscopy in authentication of adulterated traded medicinal plants

The medicinal plants are utilized globally considering the cheap and chemical free source, but their correct identification and authentication is prerequisite for safety and efficacy of plant‐based medicines. The present study encompassed traded medicinal plants (16) with high therapeutic value from diverse families like Brassicaceae, Berberidaceae, Malvaceae, Salicaceae, Myrtaceae, Papilionaceae, Ascelpiadaceae, Colchicaceae, Violaceae, and Vitaceae for detailed microscopic study of characters that is, morphology, pollen shape and sizes, P/E ratio, pore length and width, spine length, colpi dimensions, and exine sculpture pattern. The plants showed noteworthy differences in microscopy of Wattakaka volubilis having pollinia, translator and corpusculum like structures while pores were visible in Colchicum luteum, Alcea rosea, and Hibiscus syriacus. The spines were observed in Centipeda minima, A. rosea, and H. syriacus being dimorphic spines in A. rosea and monomorphic in H. syriacus. The exine sculpturing pattern was reticulate in mostly studied plants however distinctive exine pattern was noted in Berberis aristata and Berberis lyceum. The highest polar diameter, equatorial diameter and exine thickness among studied plants were observed in H. syriacus (161 μm), C. luteum (50 μm) and Vitis jacquemontii (1.10), respectively. Thus, microscopy of medicinal plants in addition to other taxonomic evidence offers a supportive skill in authentication, consequently utilization by local consumers and pharmaceutical industries.     

Impacts of gold nanoparticles on MHD mixed convection Poiseuille flow of nanofluid passing through a porous medium in the presence of thermal radiation,thermal diffusion and chemical reaction

Impacts of gold nanoparticles on MHD Poiseuille flow of nanofluid in a porous medium are studied. Mixed convection is induced due to external pressure gradient and buoyancy force. Additional effects of thermal radiation, chemical reaction and thermal diffusion are also considered. Gold nanoparticles of cylindrical shape are considered in kerosene oil taken as conventional base fluid. However, for comparison, four other types of nanoparticles (silver, copper, alumina and magnetite) are also considered. The problem is modeled in terms of partial differential equations with suitable boundary conditions and then computed by perturbation technique. Exact expressions for velocity and temperature are obtained. Graphical results are mapped in order to tackle the physics of the embedded parameters. This study mainly focuses on gold nanoparticles; however, for the sake of comparison, four other types of nanoparticles namely silver, copper, alumina and magnetite are analyzed for the heat transfer rate. The obtained results show that metals have higher rate of heat transfer than metal oxides. Gold nanoparticles have the highest rate of heat transfer followed by alumina and magnetite. Porosity and magnetic field have opposite effects on velocity.

     

An accurate multi-modal biometric identification system for person identification via fusion of face and finger print

World Wide Web - Internet of things (IoT) have entirely revolutionized the industry. However, the cyber-security of IoT enabled cyber-physical systems is still one of the main challenges. The...