Climate change levy and its application within the dairy industry

The government's climate change levy on energy use in the nondomestic sector was announced in the March 1999 Budget and came into effect on 1 April 2001. During 1990 it is estimated that 603 million tonnes of carbon dioxide contributed to 79% of the UK's greenhouse gas emissions.
  Nationally, energy consumption within the dairy industry contributes to only 0.2% of the UK's annual emissions of carbon dioxide and climate change levy agreements throughout the industry are unlikely to have a major impact on the government's Climate Change Programme.
  Paradoxically, the arrangements that dairies are required to put into place as part of their Climate Change Agreements are of paramount importance for the achievement of operational and process efficiency within the dairy sector.     

Properties of some cement stabilised compressed earth blocks and mortars

Findings from an on-going investigation into the effects of soil properties and cement content on physical characteristics of compressed earth blocks and soil mortars are presented. A series of test blocks were fabricated using a range of composite soils, stabilised with 5% and 10% cement, and compacted with a manual press. Results for saturated compressive strength, drying shrinkage, wetting/drying durability, and water absorption testing are presented in the paper. In conjunction with the block tests, workability and compressive strength characteristics of suitable soil: cement and cement: lime: sand mortars were also studied. Mortar consistency was assessed using cone penetrometer and slump tests. Water retention properties of the mortars were also measured. For a given compactive effort, the strength, drying shrinkage, and durability characteristics of the compressed earth blocks improved with increasing cement and reducing clay content. Slump testing proved the most reliable means of assessing soil: cement mortar consistency. Both the flow table and cone penetrometer tests were found to be unsuitable. Water retention properties of soil: cement mortars appear well-suited to typical unit water absorption characteristics. Mortar strengths were closely related to cement and clay contents, but as expected were less than the average unit strengths.     

The optical crossbar switch for signal routeing on board communication satellites

A switch matrix operating on baseband or microwave signals is a critical element of communications satellites employing multiple beam antennas and on-board switching. Optical switching by spatial light modulators (SLMs) offers a means of implementing large and highly flexible switch arrays capable of routeing signals at baseband or microwave frequencies. This approach offers potential mass, power and size advantages compared to alternative technologies. The paper reviews the essential features of optical crossbar switch architectures based on SLMs and discusses options for the lasers, SLMs, interface optics and photodetectors. Proof-of-concept demonstrators for optical crossbar switches operating on both baseband and microwave signals are described. Finally, an outline design for a compact switch module is described and the critical component developments needed to realize this are identified.     

Measurements on ferroelectric liquid-crystal spatial light modulators: contrast ratio and speed

The contrast ratio and the speed of a 16 × 16 electrically addressed spatial light modulator, composed of a ferroelectric liquid-crystal layer on top of a VLSI silicon backplane, are measured with different methods but consistent results. The results are presented and compared with recently reported results on a similar spatial light modulator [Appl. Opt. 33, 2775 (1994)].     

Self‐Assembly Behavior of Oppositely Charged Inverse Bipatchy Microcolloids

A directed attractive interaction between predefined “patchy” sites on the surfaces of anisotropic microcolloids can provide them with the ability to self‐assemble in a controlled manner to build target structures of increased complexity. An important step toward the controlled formation of a desired superstructure is to identify reversible electrostatic interactions between patches which allow them to align with one another. The formation of bipatchy particles with two oppositely charged patches fabricated using sandwich microcontact printing is reported. These particles spontaneously self‐aggregate in solution, where a diversity of short and long chains of bipatchy particles with different shapes, such as branched, bent, and linear, are formed. Calculations show that chain formation is driven by a combination of attractive electrostatic interactions between oppositely charged patches and the charge‐induced polarization of interacting particles.     

Holographic optical switching: the “ROSES” demonstrator

The design, assembly, and performance of a prototype 1×8 free-space switch demonstrator using reconfigurable holograms are reported. Central to the switch fabric is a ferroelectric liquid crystal (FLC) on silicon spatial light modulator (SLM) deposited with a 540×1 array of highly reflective and planar mirror strips. The input and output ports of the switch are fabricated as a linear array of silica planar waveguides connected to single-mode fibers, and the holographic beam-steerer operates without the need for adjustment or dynamic alignment. The waveguide array and the single Fourier transform lens for the 2f holographic replay system are housed in an opto-mechanical mount to provide stability. The switch operates at 1.55 μm wavelength and has a designed optical bandwidth of >60 nm. The first measured insertion loss and crosstalk figures are 16.9 dB and -19.1 dB, respectively. Improvements in SLM performance, the use of new addressing schemes and the introduction of better alignment techniques are expected to improve these figures considerably. The preliminary performance of a 3×3 optical crossconnect is also presented to show that this technology is scalable to N×N switching fabrics     

Mechanical and electromechanical properties of PMNT single crystals for naval sonar transducers

PMNT single crystals in the relaxor-ferroelectric lead magnesium niobate (PMN)-lead titanate (PT) system provide significant advantage for underwater sonar transducers. Compared to lead zirconate titanate (PZT) ceramics, the large electromechanical coupling factor provides significant increases in transducer bandwidth. The superior strain energy density generates higher source level across the band, and the lower Young's modulus allows considerably smaller transducers. These payoffs occur even when PMNT crystals are subject to navy operating conditions such as uniaxial mechanical compressive stresses up to 42 MPa, electric fields up to 1.2 MV/m, and a temperature range from 5 to 50 degrees C. The impact of navy-relevant electric fields and mechanical stresses on crack propagation and failure of piezoelectric single crystals is investigated. The compressive, flexural, and tensile strength of PMNT crystals is reported and discussed with respect to conventional PZT ceramics and the operating conditions of a typical naval transducer.     

Numerical simulation of the dynamic impact breakage testing of rock

Laboratory drop weight tests and numerical modelling have been used to study the effect of impact energy on the degree of fragmentation of cylindrical granite specimens. The drop weight tests indicated that the degree of fragmentation of the granite formed a non-linear relation with impact energy. In the modelling of the drop weight test, the shear localisation developed in the granite was assumed to represents discrete fracture planes. Image analysis of the model outputs was undertaken to determine particle size distributions. Corresponding grading curves from the numerical modelling were then validated against the laboratory derived curves indicating the potential of numerical modelling to simulate the fragmentation process of brittle rocks.