Two-dimensional singular vector elements for finite-elementanalysis

The finite-element method (FEM) exhibits a reduced convergence rate when used for the analysis of geometries containing sharp edges where the electromagnetic field is singular. The convergence of the method can be-improved by introducing singular elements that model analytically predicted singular behavior. A number of authors have developed singular elements that are compatible with the scalar FEM. In this paper, we propose a new singular element that is compatible with edge-based vector finite elements and can cope with any order of singularity while preserving the sparsity of the FEM equations. Edge-based singular elements more correctly model singular fields and thus require fewer unknowns, while avoiding the introduction of spurious modes in the numerical solution. Numerical results verify that the convergence of the FEM is significantly improved     

Microsomal and photochemical oxidation of aflatoxin B1

The UV irradiation (lambda = 362 nm) of aflatoxin B1 (AfB1) dissolved in water resulted in the formation of an oxidized product. The process was not inhibited by ionol, a routine inhibitor of the radical processes. The oxidized product was not found in the system where AfB1 was metabolized by the 3-methylcholanthrene-activated rat liver microsomes. It is suggested that the product is identical with 2,3-dihydrodiol of AfB1.     

Creep in polyethylene and hydroxyapatite reinforced polyethylene composites

Isochronous stress-strain relationships and long term creep performance for unfilled and hydroxyapatite filled polyethylene composites have been studied. The tests were carried out in a buffered (pH=7.5) Ringer's solution at 37°C. It was observed that the inclusion of hydroxyapatite does not remove the non-linear viscoelasticity of polyethylene. The creep resistance is found to increase with increase in volume fraction of hydroxyapatite. The creep failure of composites at long times can occur due to debonding of the interface.     

Metal dusting (catastrophic carburization) of a waste heat boiler tube

A waste-heat boiler at a chemical plant suffered an unusual tube failure. The boiler is part of the partial oxidation (POx) syngas production for a 2-ethyl hexanol unit. The syngas primarily consists of H₂, CO and CO₂ with trace amounts of CH₄. Steam is also reportedly injected into the process. The syngas enters the boiler at approximately 1800°F (980°C) on the internal side of the tube and is cooled, while generating approximately 640 psi (4.41 MPa) steam at 490°F (255°C) on the outside of the tube. The internal surface of the tube contained a region of metal loss that was approximately 1 inches long by inch wide (44.5 mm by 19 mm). The metal loss was very localized with little evidence of attack elsewhere on the tube's surface. Molten salt attack, sulfidation and metal dusting were considered as possible mechanisms for the metal loss. It was determined that metal dusting, also called catastrophic carburization, was the cause of the metal loss. The cause of the metal dusting was localized overheating of the tube, which developed because of water/steam flow disruption due to contact of the tube baffle with the tube. Approximately one year after this tube failure, the boiler suffered two more tube failures, which were also attributed to metal dusting.     

Flocking in Fixed and Switching Networks

This note analyzes the stability properties of a group of mobile agents that align their velocity vectors, and stabilize their inter-agent distances, using decentralized, nearest-neighbor interaction rules, exchanging information over networks that change arbitrarily (no dwell time between consecutive switches). These changes introduce discontinuities in the agent control laws. To accommodate for arbitrary switching in the topology of the network of agent interactions we employ nonsmooth analysis. The main result is that regardless of switching, convergence to a common velocity vector and stabilization of inter-agent distances is still guaranteed as long as the network remains connected at all times     

Response of rainfed bread and durum wheat to source,level and timing of nitrogen fertilizer on two Ethiopian Vertisols: II. N uptake,recovery and efficiency

In trials conducted at 2 highland Vertisol sites in Ethiopia in 1990 and 1991, 2 locally popular wheat cultivars, 1 spring bread wheat (Triticum aestivum L.) and 1 durum wheat (T. durum Desf.), were supplied with nitrogen (N) fertilizer at 0, 60 and 120 kg N ha^–1 in the form of large granular urea (LGU), standard urea prills or ammonium sulfate. N was applied all at sowing, all at mid-tillering or split-applied between these two stages (1/3:2/3). While durum wheat exhibited the highest N concentration in grain and straw, bread wheat, because of its higher productivity, resulted in a greater grain and total N uptake. In general, split application of N and use of LGU as N source enhanced grain and total N uptake, apparent N recovery and agronomic efficiency of N, particularly under severe water-logging stress. Where significant, the interactions among the experimental factors substantiated the superior responsiveness of the bread wheat cultivar to fertilizer N, and the beneficial effects of split N application and LGU as an N source. Split application of N tended to nullify the positive effects of LGU, presumably by approximating the delayed release of N achieved with LGU. Considering the potential benefits to Ethiopian peasant farmers and consumers, split application of N should be advocated, particularly on water-logged Vertisols; LGU could be an advantageous N source assuming a cost comparable to the conventional N source urea.