Closed loop torque SVM-DTC based on robust super twisting speed controller for induction motor drive with efficiency optimization

This paper presents a space vector modulation (SVM) based Direct Torque Control strategy (DTC) for induction motor (IM) in order to overcome the drawbacks of the classical DTC. SVM can reduce the high torque and flux ripples by preserving a fixed switching frequency. This technique is known by the closed loop torque SVM-DTC. Moreover, the control scheme performance is improved by inserting a second order sliding mode super twisting controller in the outer loop for speed regulation. This nonlinear technique ensures a good dynamic and high robustness against external disturbance. Furthermore, the IM energy optimization is treated in the second objective of this paper. A proposed model based loss minimization strategy is presented for efficiency optimization. This strategy chooses an optimal flux magnitude for each applied load torque. The proposed optimized SVM-DTC algorithm will be investigated by simulation and real time implementation using Matlab/Simulink with real time interface based on dSpace 1104 signal card.     

In vitro comparisons between Carica papaya and pancreatic lipases during test meal lipolysis: Potential use of CPL in enzyme replacement therapy

High levels of lipase activity are known to occur in Carica papaya latex, and this activity is being used in some biotechnological applications. The lipolytic activity of C. papaya lipase (CPL) on dietary triacylglycerols (TAG) has not yet been studied. Hence, the aim of this study was to characterise the specific activity of CPL on dietary TAG present in a crude preparation. Also, we have determined its stability during the lipolysis of a test meal at various pH values mimicking those occurring in the gastro-intestinal tract, with or without bile, and have compared these properties with those of porcine pancreatic extract (PPE) and human pancreatic lipase (HPL). CPL showed maximum stability at pH 6.0, both with and without bile. Some residual activity was still observed at pH 2 (20%), whereas the pancreatic lipases tested were immediately completely inactivated at this pH. In the absence of bile, the highest specific activities were measured at pH 6 in the case of CPL, PPE and HPL. Adding bile slightly decreased the CPL activity in the 4–6 pH range, thus shifting the optimum CPL activity to pH 7, where the presence of bile had no effect. Lipolysis levels decreased with the pH, but CPL was still more active than PPE at pH 5 on a relative basis. These results suggest that CPL might be a promising candidate for use as a therapeutic tool on patients with pancreatic exocrine insufficiency.     

Uniform Stabilization of an Axially Moving Kirchhoff String by a Boundary Control of Memory Type

In this paper, we study the stabilization of solutions of an axially moving string of kirchhoff type by a viscoelastic boundary control. We prove that the dissipation produced by the viscoelastic term is sufficient to suppress the transversal vibrations that occur during the axial motion of the string, and we also show that the string displacement decays in an arbitrary rate. When comparing with immobile strings, we conclude that the movement of the string itself produces enough extra damping ensuring the stabilization.     

Coupled heat and moisture transfer in multi-layer building materials

A dynamic mathematical model for simulating the coupled heat and moisture migration through multi-layer porous building materials was proposed. Vapor content and temperature were chosen as the principal driving potentials. The discretization of the governing equations was done by the finite difference approach. A new experimental set-up was also developed in this study. The evolution of transient temperature and moisture distributions inside specimens were measured. The method for determining the temperature gradient coefficient was also presented. The moisture diffusion coefficient, temperature gradient coefficient, sorption–desorption isotherms were experimentally evaluated for some building materials (sandstone and lime-cement mortar). The model was validated by comparing with the experimental data with good agreement. Another advantage of the method lies in the fact that the required transport properties for predicting the non-isothermal moisture flow only contain the vapor diffusion coefficient and temperature gradient coefficient. They are relatively simple, and can be easily determined.     

Analyse de la stabilité spectrale d’un laser DFB à trois sauts de phase (3PS-DFB)

The aim of this article is to analyze the spectral stability of the three phase shift distributed feedback (3ps-dfb) laser by using Time domain model (tdm). We have developed a software that simulates static and dynamic properties of distributed feedback (dfb) multi-sections laser at large signal. The best single-mode stability operation up to 18mW of the 3ps-dfb is achieved for three phase shifts at (π, π, π) whatever the phase position. These results showed that the 3ps-dfb laser was a much more suitable structure to realize stable single-mode high-power operation for a coherent optical communication system.     

The Development of a Component Commonality Metric for Mass Customization

In this paper, we review the commonality indices that have been developed thus far and demonstrate their possible limitations in evaluating component commonality for mass customization. Therefore, we develop a commonality index that considers generic bills-of-materials for mass customization instead of material-requirements-planning-like product structures. The construction of the index is carried out stepwise. At first, the intermediate commonality metrics with respect to common components, must-generic items, and options are defined. Then, we introduce the total commonality index, which enables the evaluation of the overall commonality of a product family. The index suggests a significant increase of commonality as the number of must-generic items and common components increases. However, product options have a minor contribution to the improvement of commonality. On the basis of a sensitivity analysis, the managerial implications that would result from using the index in practice are derived. We also explore the interdependencies between component commonality and variety-induced complexity on the shop floor. Finally, we discuss the application requirements that should be satisfied in order to effectively use the index     

A faulty node detection scheme for wireless sensor networks that use data aggregation for transport

This paper presents a faulty node detection approach for wireless sensor networks that aggregate measurement data on their way toward the sink (base station). The approach is based on the idea of commanding sensor nodes on the aggregation paths to temporarily stop including their readings in the received aggregated readings from their upstream neighbors. The scheme is dependent on the ability of the sink to detect faulty nodes through changes in the received aggregated readings at the sink using a Markov Chain Controller (MCC). The algorithm that is run in the sink uses the MCC to assign a state to each sensor node based on transitions that are triggered by receiving aggregated path readings, and accordingly deduces the nodes that may be faulty. The experimental results show at least 98% detection rate at the cost of reasonable detection delays and generated wireless network traffic. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis,Chiral Separation,Absolute Configuration Assignment,and Biological Activity of Enantiomers of Retro‐1 as Potent Inhibitors of Shiga Toxin

The Shiga toxin (Stx) family is composed of related protein toxins produced by the bacteria Shigella dysenteriae and certain pathogenic strains of E. coli. No effective therapies for Stx intoxication have been developed yet. However, inhibitors that act on the intracellular trafficking of these toxins may provide new options for the development of therapeutic strategies. This study reports the synthesis, chromatographic separation, and pharmacological evaluation of the two enantiomers of Retro‐1, a compound active against Stx and other such protein toxins. Retro‐1 works by inhibiting retrograde transport of these toxins inside cells. In vitro experiments proved that the configuration of the stereocenter at position 5 is not crucial for the activity of this compound. X‐ray diffraction data revealed (S)‐Retro‐1 to be slightly more active than (R)‐Retro‐1.